Basic Operation For Dme Wipes - Sony DVS-7300 User Manual

Relation with processed keys
On each M/E bank, if you are using the same DME for both a DME wipe and
a processed key, the first selected function takes precedence.

Basic Operation for DME Wipes

Using a DME wipe for a background transition
To use a DME wipe for a background transition, use the following procedure.
1
Select the background video for after the transition.
M/E background: Select the background with the B-bus cross-point
button.
PGM/PST background: Select the background with the cross-point
button for the PST bus.
2
In the transition control section, press the BKGD next transition selection
button, turning it on.
3
In the transition control section, select DME wipe as the transition type.
M/E background: When specifying single mode, press either DME 1 or
DME 2 transition type selection button, turning it on, and when
specifying dual mode, press the both buttons simultaneously, turning
them on.
PGM/PST background: Press the DME transition type selection
button, turning it on.
4
Select the DME wipe pattern, and if required adjust the parameters.
For details of this operation, see the section "DME Wipe Settings" (page
4-131).
5
Use the fader lever or AUTO TRANS button to carry out the transition.
Chapter 4 Basic Operations for Image Creation
4-129