Copying; Undoing The Effect Of An Edit - Sony DVS-7300 User Manual

Key Frame Creation and Editing

Copying

Copying key frames
Use the following procedure to copy key frames.
1
2
3
4
5
6

Undoing the Effect of an Edit

When you press the INS, DEL or MOD button, the previous state is saved in
an area of memory known as the "LAST X buffer". After an erroneous
operation, you can return to the previous key frame state by pressing the
LAST X button in the numeric keypad block.
8-14
Chapter 8 Key Frame Effects
Press the EDIT ENBL button, turning it on.
Stop the effect on the key frame you wish to copy.
To copy more than one key frame, press the FROM TO button, and
specify the key frames to be copied.
For details of the procedure for specifying the key frames, see the section
"Modifying more than one key frame simultaneously" (page 8-10).
Press the COPY button.
This copies the key frame or frames specified in steps 2 and 3 into the
paste buffer.
Move to the edit point where you wish to insert the copy.
Press the PASTE button.
When the destination position is on a key frame, to insert the new key
frame before, hold the SHIFT button down while pressing the PASTE
button.
This copies the key frame or frames from the paste buffer.