Operation Sequence
The following diagram shows the principal steps in the process from creating
the key frames to the execution of the effect.
Selecting a register (see page 8-6)
When creating a new effect, select an empty register; to edit an existing
effect, select the corresponding register.
Specifying sub-registers and edit points (see page 8-7)
Select the sub-register or channel to which the editing applies and specify
the edit points.
Creating and editing key frames (see page 8-8)
Use insertion, deletion and modification to create the necessary key
frames.
Time settings (see page 8-15)
Set the overall length of the effect and the time intervals between key
frames.
Path settings (see page 8-20)
Select the manner in which the interpolation between key frames is carried
out.
Effect execution (see page 8-26)
A smooth effect transition is obtained, according to the time and path
settings.
Saving the effect (see page 8-30)
When the effect is completed, you can save it in a register.
m
m
m
m
m
m
Chapter 8 Key Frame Effects
8-5