Sony DVS-7300 User Manual page 159

4
If necessary, make the following settings.
• To adjust the width or horizontal position of the key source, press F6
(KEY POS), turning it on, and set the parameters.
Knob Parameter
1 Left Pos
2 Right Pos
3 Phase
• When using the FineKey™ function to adjust the positions of the four
edges (top, bottom, left and right) individually, press F7 (FINE KEY),
turning it on, and set the parameters.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
1 Softness
2 H Phase
3 V Phase
Note
When the unmodified ("normal") edge, drop border, or shadow option
is selected, in "4H DROP OFF" mode, it is not possible to adjust the
Top, Bottom and Softness parameters.
• To invert the sense of the key source signal, press F8 (KEY INVERT),
turning it on.
Setting
Move the left edge of the key (–3.00 to +3.00)
Move the right edge of the key (–3.00 to +3.00)
Move the key
Setting
Top edge position of key (–2.00 to +2.00)
Left edge position of key (–2.00 to +2.00)
Right edge position of key (–2.00 to +2.00)
Bottom edge position of key (–2.00 to +2.00)
Set the degree of edge softness (0.00 to 100.00)
Move the key horizontally
Move the key vertically
Chapter 4 Basic Operations for Image Creation
(Continued)
4-75