Sony DVS-7300 User Manual page 138

Keys
3
4-54
Chapter 4 Basic Operations for Image Creation
Adjust the parameter settings as necessary.
When you selected border, drop border or shadow in step 2, when F9
(MATTE) is on (a color matte is selected as the edge fill), you can adjust
the parameters for matte 1 regardless of whether the color mix function is
on or off.
The parameter adjustment method depends on the optional board used,
BKDS-7270 or BKDS-7271.
• Parameter adjustments with the BKDS-7270 installed
When applying a border:
Knob Parameter
1 Width
2 Position a)
4 Density
1 Luminance
2 Saturation
3 Hue
4 Density
a) For a pattern key the Position setting is not available.
b) For the relationship between the code numbers, 0 to 8, and the position, see page 4-41.
When applying a drop border or shadow:
Knob Parameter
1 Width
2 Position
4 Density
1 Luminance
2 Saturation
3 Hue
4 Density
a) For the details of "4H DROP ON" and "4H DROP OFF" mode, see "Edge types and key
fill/key source positions" (page 4-58).
b) For the relationship between code numbers and positions, see page 4-42.
Setting
Set width (0 to 4; for a pattern key: 0.00 to 100.00)
Set position (0 to 8) b)
Set density (0.00 to 100.00)
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set density (0.00 to 100.00)
Setting
Set width (in "4H DROP ON"
a)
DROP OFF" mode: 0 to 8
Set position (in "4H DROP ON"
"4H DROP OFF" a) mode: 1 to 3)
Set density (0.00 to 100.00)
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set density (0.00 to 100.00)
a)
mode: 0 to 4; in "4H
a) b)
mode: 1 to 8 ; in
b)