Sony DVS-7300 User Manual page 478

Setup Relating to Input/Output Signals (INPUT/OUTPUT Menu)
Carrying out setup relating to switcher input signals
(SWITCHER INPUT menu)
14-22
Chapter 14 Setup
You can use the SWITCHER INPUT menu to adjust the horizontal phase of
the input signal in the range –16 to +16 CK (clock cycles).
To carry out these settings, use the following procedure.
1
In the INPUT/OUTPUT menu, press F3 (SWER INPUT).
The SWITCHER INPUT menu appears.
BUTTON
No.
F1 F2 F3
Function key indications in the SWITCHER INPUT menu
For details of indications other than for the function keys in the
SWITCHER INPUT menu, see the next item "Indications in the
SWITCHER INPUT menu".
2
Select the cross-point button to which the settings apply, using either of
the following methods.
• Hold down F1 (BUTTON No.) and press the required cross-point
button in the auxiliary bus bank.
• Hold down F1 (BUTTON No.) and use the cursor movement keys to
select the required cross-point button.
• Hold down F1(BUTTON No.) and turn control knob 2.
• Hold down F1(BUTTON No.) and enter the required cross-point button
number using the numeric keypad.
VIDEO
PHASE PHASE
ADJUST ADJUST
F4 F5 F6
KEY
F7 F8 F9 F10