Sony DVS-7300 User Manual page 91

Cross-point buttons and buses for the BKDS-7011/7023
Bus Button row Banks
Background A A
Background B B
Key 1 and key 2 fill K
Key 1 and key 2 K
source
Auxiliary bus cross-point buttons
Program (BKDS- PGM
7023)
Preset (BKDS-7023) PST
AUX 1 to AUX 13 Auxiliary bus cross-point buttons
Edit preview
Frame memories 1
and 2
M/E utility buses
Downstream keyers 1 Auxiliary bus cross-point buttons
to 4, key fill (when
DMK-7000
connected)
Downstream keyers 1 Auxiliary bus cross-point buttons
to 4, key source
(when DMK-7000
connected)
AUX 14 to AUX 28
Auxiliary bus cross-point buttons
Delegation operation
M/E-1, M/E-2, M/E-3 None required.
M/E-1, M/E-2, M/E-3 Press the KEY 1 or
KEY 2 button in the
corresponding key
control section, turning
it on.
M/E-1, M/E-2, M/E-3 Press the KEY 1 or
KEY 2 button in the key
control section of the
relevant M/E bank to
delegate the
corresponding keyer,
then hold down the
SPLIT button.
PGM/PST None required.
Press the required
auxiliary delegation
button, turning it on.
Hold down the
corresponding one of
the DSK1 to DSK4
buttons in the
downstream keyer
control section.
In the corresponding
one of the DSK1 to
DSK4 menus, hold
down the SPLIT button.
In the setup menu, set
the auxiliary bus bank
blank button to AUX 14
- 28, then press this
button, turning it on.
Thereafter, press the
required auxiliary
delegation button
turning it on.
Chapter 4 Basic Operations for Image Creation
4-7