Sony DVS-7300 User Manual page 240

Wipes Using a BKDS-7370 Board
4-156
Chapter 4 Basic Operations for Image Creation
Changing the aspect ratio (ASPECT): This allows you to vary the aspect
ratio of the pattern.
Aspect ratio function disabled
Pattern rotation (ROTATION): This rotates the pattern, in any of three
ways. These are shown in the following figure, along with the names of
the parameters used to control them.
Rotating the pattern
through an angle (which
does not change as the
transition progresses)
Parameter: "Angle"
Spring (SPRING): As the transition progresses, the edges of the pattern are
deformed inward or outward.
Spring off
Aspect ratio changed
Rotating the pattern
through the specified
angle during the course
of the complete
transition.
Parameter: "Magnitude"
Rotating the pattern at
the specified angular
speed during the
transition.
Parameter: "Speed"
Spring on