Menus accessed from the PERIPH menu (Continued)
Menu
Functions
ROUTER
Making settings relating to the interface
INTERFACE
to the routing switcher
GPI INPUT
Making the following settings relating to
switcher and DMK-7000 GPI inputs
• Selecting the trigger polarity
• Selecting the trigger action
GPI OUTPUT
Making the following settings relating to
switcher and DMK-7000 GPI outputs
• Selecting the operation to cause the
GPI output
• Making the trigger selection
PANEL PORT
Making the following settings
ASSIGN
• Selecting the communications ports for
use by DME 3 to DME 6 buttons.
• GPI output port settings
• Setting the time code mode for VTR
control.
Function key
See page
F6 (ROUTER
14-50
IF)
F7 (GPI
14-51
INPUT)
F8(GPI
14-54
OUTPUT)
F9 (PANEL
14-56
PORT)
Chapter 14 Setup
14-45