Sony DVS-7300 User Manual page 530

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
14-74
Chapter 14 Setup
Setting
Setting the cross-
point shift button lock/
unlock function
Settings for key frame
operations
Setting custom modes Skip to step 3.
Setting the
programmable button
function
(for other than the
ALL button in the
numeric keypad
section)
Setting the function of
the ALL button in the
numeric keypad
section
3
Press F7 (CUSTOM MODE).
The CUSTOM MODE menu appears.
Operation
Press F4 (SHIFT LOCK).
This cycles the setting through OFF, ON and HOLD.
Carry out the following procedure.
1 Press F6 (KF MODE).
The KEY FRAME MODE menu appears.
2 Press F1 (AUTO SAVE) or F2 (EDIT ENABLE AT
OFF).
This toggles the setting between ENBL and DSBL.
Carry out the following procedure.
1 Press F8 (PROGRAM BUTTON).
The PROGRAMMABLE BUTTON menu appears.
2 Hold down F1 (PROGRAM BUTTON), and from the
flashing programmable buttons, press the desired one.
The selected button name in the list on the screen
changes to reverse video.
3 Either press F8 (FUNC SELECT) or turn control knob 3
to align the cursor with the desired function from the list.
4 Press F6 (SELECT).
This assigns the function selected in step 3 to the
button selected in step 2.
Carry out the following procedure.
1 Press F8 (PROGRAM BUTTON).
The PROGRAMMABLE BUTTON menu appears.
2 Press F10 (DEFINE ALL).
The ALL BUTTON DEFINE menu appears.
3 Press F1 (SELECT) and align the cursor with the block
that contains the desired button.
Depending on the selected block, the button names that
can be assigned to other function keys than F1 appear.
4 Press the function keys as required to highlight the
function key indications for the required functions while
not highlighting the function key indications for the
functions not required.