Port Enable Settings; Overview - Sony DVS-7300 User Manual

Port Enable Settings

Overview

The port enable function controls the enabling and disabling of ports on the
switcher from external devices. You can make these settings for the
following ports.
Switcher ports:
• GPI (parallel port, D-sub 25-pin)
You can carry out the GPI input/output settings in a setup menu (see pages
14-51 and 14-54).
• DME1 to DME4 (serial, RS-422A, D-sub 9-pin)
• EDITOR A/REMOTE 1/DME 5 (serial, RS-422A, D-sub 9-pin)
• EDITOR B/REMOTE 2/DME 6 (serial, RS-422A, D-sub 9-pin)
• PANEL 2/REMOTE 3 (serial, RS-422A, D-sub 9-pin)
DMK ports:
• GPI (parallel, D-sub 25-pin)
For GPI input/output settings, use the SETUP menu. (See pages 14-51 and
14-54.)
• EDITOR (serial, D-sub 25-pin)
• PANEL B (serial, RS-422A, D-sub 9-pin)
Note
For the control of the auxiliary buses from ports other than GPI, the setting
(ENBL/DSBL/MANUAL) in the setup menu (see page 14-47) takes
precedence. The MISC menu setting is only effective when this setup menu
item is set to MANUAL.
Chapter 12 MISC Menu Operations
12-3