Sony DVS-7300 User Manual page 534

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
Linking two functions (LINK menu)
14-78
Chapter 14 Setup
You can make the following settings in the LINK menu.
• Linking operations on two buses: You can set up one bus (the master bus)
so that operations on another bus are linked to it. You can set up a
maximum of 16 such linkages.
• Linking a specified button to a GPI output port: You can set up a button
on the switcher control panel (the master button) so that when it is
pressed a GPI trigger is output from a particular GPI output port.
• Linking a number of downstream keyers: You can link the AUTO
TRANS and DSK ON buttons of one downstream keyer (the master) to
the AUTO TRANS and DSK ON buttons of another downstream keyer.
You can use this setting so that, for example, pressing the AUTO
TRANS button of downstream keyer 1 causes a simultaneous auto
transition on downstream keyers 2 to 4.
Linking operations on two buses
Use the following procedure.
1
In the OPERATION menu press F7 (LINK).
The LINK menu appears.
2
Press F1 (LINK).
The BUS/GPI LINK menu appears.
LINK AUTOSEL
SELECT SETUP
TYPE
#2 BUS
F1 F2 F3
Function key indications in the BUS/GPI LINK menu (when F2 is set to BUS)
3
Press F1 (LINK SELECT) or turn control knob 2 to align the cursor with
the link you wish to select from the list.
AUTOSEL
1
F4 F5 F6 F7
MASTER MASTER
SELECT /LINK SELECT
MASTER #3
F8 F9 F10