To switch a cross-point on the routing switcher from the control
panel
1
Press the top menu selection button assigned to the ROUTER menu.
To assign a menu to a top menu selection button, use the UTILITY menu
(page 14-86).
The ROUTER menu appears.
DEST
SELECT
#2
F1
F2
F3
Function key indications in the ROUTER menu
2
Press F2 (DEST SELECT), or turn control knob 2 to align the cursor
with the bus name (DESTINATION) on the routing switcher.
3
Press F8 (SOURCE SELECT), or turn control knob 3 to align the cursor
with the input signal name on the routing switcher.
4
Press F6 (SELECT).
This switches the cross-point on the routing switcher.
This operation can also be carried out using the auxiliary bus bank.
For more details, see "Setting the programmable button function" (page 14-
67).
SELECT
F4
F5
F6
F7
Chapter 13 Interfacing With External Devices
SOURCE
SELECT
#3
F8
F9
F10
13-5