Path Settings
Path settings within the "USER" group
Making detailed settings for individual items within the "USER"
group
1
2
3
8-24
Chapter 8 Key Frame Effects
In the SWER KF PATH menu, press F5 (USER).
The function key indications change as follows.
CURVE
AUX
FRAME
BUSES
CCR
MEM1
LINEAR
STEP
LINEAR
F1
F2
F3
Press the required one of F1 (VIDEO PROC) to F4 (FRAME MEM2).
Every time you press the key, the path type changes as follows, causing
the symbol for the selected path type to appear on the menu screen.
F1 (CCR): The selection cycles through OFF, STEP, LINEAR and S-
CURVE.
F2 (AUX BUSES): The selection toggles between OFF and STEP.
F3 (FRAME MEM1)/F4 (FRAME MEM2): The selection cycles
through OFF, STEP and LINEAR.
Press F10 (HUE PATH), then select the HUE path type.
For details, see steps 4 and 5 (page 8-22) in the section "Setting the
paths for all banks".
FRAME
MEM2
LINEAR
F4
F5
F6
HUE
PATH
F7
F8
F9
F10