Oil Pump Drive Shaft; Engine Lubrication System Diagram - Jeep J-10 Series 1982 Technical & Service Manual

p
r
r
r
r
r
r
r
p
p
p
r
p
p
ENGINES 1B-17
90870
Fig. 1B-28 Engine Lubrication System Diagram
Oil Pump Drive Shaft
Removal
(1) Remove alternator and upper bracket.
(2) Remove oil pump drive shaft retainer plate bolts
and remove bushing and shaft assembly.
Installation
(1) Install oil pump drive shaft assembly by turning
shaft until it meshes with camshaft drive gear and in
serts properly in oil pump body.
(2) Thoroughly clean sealing surfaces on cylinder
block and retainer plate.