Download Print this page

Jeep CHEROKEE 2016 Owner's Manual

Jeep CHEROKEE 2016 Owner's Manual

Hide thumbs Also See for CHEROKEE 2016:

Operating information manual (792 pages)

,

Owner's manual (770 pages)

,

User manual (284 pages)

Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Cherokee

2 0 1 6

O W N E R ' S M A N U A L

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the CHEROKEE 2016 and is the answer not in the manual?

Questions and answers

Beverly Olney

February 26, 2025

How do I get an actual printed manual for my 2016 Jeep Cherokee Limited?

0

Summary of Contents for Jeep CHEROKEE 2016

Page 1 Cherokee 2 0 1 6 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5 INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..7 ROLLOVER WARNING ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your Jeep® vehicle best, has factory-trained Congratulations on selecting your new FCA US LLC technicians and genuine MOPAR® parts, and cares about vehicle. Be assured that it represents precision workman- your satisfaction.
Page 7: How To Use This Manual
INTRODUCTION 5 control. Failure to operate this vehicle safely may result seat belts could cut the highway death toll by 10,000 or in a collision, rollover of the vehicle, and severe or fatal more each year and could reduce disabling injuries by injury.
Page 8 6 INTRODUCTION...
Page 9: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS the Automobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration, and the This Owner’s Manual contains WARNINGS against title. operating procedures that could result in a collision, bodily injury and/or death. It also contains CAUTIONS The VIN is also stamped on either right or left hand side against procedures that could result in damage to your of the engine block.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11: Table Of Contents
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .12 VEHICLE SECURITY ALARM — IF EQUIPPED .19 ▫ Ignition Node Module (IGNM) — If Equipped. .12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Programming Additional RKE Key Fobs ..25 ▫ Remote Start Windshield Wiper De–Icer Activation — If Equipped ....35 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 LIFTGATE ......49 ENGINE BREAK-IN RECOMMENDATIONS . . .114 ▫...
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) Key Fob and a Keyless Push Button Ignition. Keyless Enter-N-Go —...
Page 15: Keyless Push Button Ignition
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Keyless Push Button Ignition This feature allows the driver to operate the ignition with the push of a button as long as the RKE Key Fob is in the passenger compartment. The Keyless Push Button Ignition has four operating positions, three of which are labeled and will illuminate when in position.
Page 16: Rke Key Fob - If Equipped
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE RKE Key Fob — If Equipped The RKE Key Fob also contains an emergency key, which stores in the rear of the RKE Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE Key Fob go dead.
Page 17: Ignition Or Accessory On Message
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 sound to remind you to place the ignition in the OFF position. In addition to the chime, the ignition or acces- sory on message will display in the cluster. WARNING! • Before exiting a vehicle, always shift the automatic transmission into PARK or the manual transmis- sion into REVERSE, apply the parking brake, turn the engine OFF, remove the RKE Key Fob from the...
Page 18: General Information
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) CAUTION! • Allowing children to be in a vehicle unattended is An unlocked vehicle is an invitation. Always remove dangerous for a number of reasons. A child or RKE Key from the ignition and lock all doors when others could be seriously or fatally injured.
Page 19: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: Changes or modifications not expressly approved bulb check. If the light remains on after the bulb check, it by the party responsible for compliance could void the indicates that there is a problem with the system. In user’s authority to operate the equipment.
Page 20: Replacement Rke Key Fobs
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! (Continued) CAUTION! • The Sentry Key Immobilizer system is not compat- • Always remove the RKE Key Fobs from the vehicle ible with some aftermarket remote starting sys- and lock all doors when leaving the vehicle unat- tems.
Page 21: Customer Rke Key Fob Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Customer RKE Key Fob Programming VEHICLE SECURITY ALARM — IF EQUIPPED Programming RKE Key Fobs may be performed at an The Vehicle Security Alarm monitors the vehicle doors authorized dealer. for unauthorized entry and the Keyless Enter-N-Go Start/Stop button for unauthorized operation.
Page 22: To Arm The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE off after three minutes, turn all of the visual signals off 2. Perform one of the following methods to lock the after 15 additional minutes, and then the Vehicle Security vehicle: Alarm will rearm itself. •...
Page 23 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • Grasp the Passive Entry Unlock Door Handle with a • The Vehicle Security Alarm remains armed during valid RKE Key Fob available in the same exterior zone power liftgate entry. Pushing the liftgate button will (if equipped).
Page 24: Security System Manual Override
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE exterior lights will flash and the horn will sound. If this NOTE: occurs, disarm the Vehicle Security Alarm. • The front courtesy overhead console and door cour- Security System Manual Override tesy lights do not turn on if the dimmer control is in the “Dome defeat”...
Page 25: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Emergency Key Removal (IGNM System) Emergency Key Removal To Unlock The Doors And Liftgate Push and release the UNLOCK button on the RKE Key Fob once to unlock the driver’s door or twice within five seconds to unlock all doors and liftgate.
Page 26: To Lock The Doors And Liftgate
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The turn signal lights will flash to acknowledge the Key Fob. This feature can be turned on or turned off. unlock signal. The illuminated entry system will also To change the current setting, refer to “Uconnect turn on.
Page 27: Using The Panic Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 If the vehicle is equipped with Passive Entry, refer to The Panic Alarm will stay on for three minutes unless “Keyless Enter-N-Go — Passive Entry” in “Things To you turn it off by either pushing the button a second Know Before Starting Your Vehicle”...
Page 28: Rke Key Fob Battery Replacement
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE RKE Key Fob Battery Replacement The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Emergency Key Removal Remove Screw From Key Fob Case 2. Separating RKE Key Fob halves requires screw re- moval (if equipped) and gently prying the two halves of the RKE Key Fob apart with the emergency key. Make sure not to damage the seal during removal.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Separating Ignition Node Module (IGNM) Remove The Emergency Key A — Emergency Key Release Button B — Remove The Emergency Key...
Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 Separating Case With The Emergency Key Separating Case With A Coin...
Page 32: General Information
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE Key Fob case, snap the two halves together.
Page 33: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: Changes or modifications not expressly approved How To Use Remote Start by the party responsible for compliance could void the All of the following conditions must be met before the user’s authority to operate the equipment. engine will remote start: REMOTE STARTING SYSTEM —...
Page 34: Remote Start Abort Message On Electronic Vehicle Information Center (Evic) Or Driver Information Display (Did) - If Equipped
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Ignition in STOP/OFF position Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) Or Driver • Fuel level meets minimum requirement Information Display (DID) — If Equipped • Vehicle Security Alarm is not signaling an intrusion The following messages will display in the EVIC/DID if the vehicle fails to remote start or exits remote start WARNING!
Page 35: To Enter Remote Start Mode
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • The engine can be started two consecutive times with To Enter Remote Start Mode the RKE Key Fob. However, the ignition must be Push and release the REMOTE START button on the cycled by pushing the START/STOP button twice (or RKE Key Fob twice within five seconds.
Page 36: To Exit Remote Start Mode And Drive The Vehicle
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Exit Remote Start Mode And Drive The Vehicle Start Active — Insert Key and Turn To Run” will display in the EVIC/DID until you insert the key. Before the end of 15-minute cycle, push and release the •...
Page 37: Remote Start Windshield Wiper De-Icer Activation - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Remote Start Windshield Wiper De–Icer 2. This device must accept any interference received, Activation — If Equipped including interference that may cause undesired op- eration. When Remote Start is active and the outside ambient temperature is less than 40°...
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the door lock button is locked (no red indicator visible) WARNING! (Continued) when you shut the door, the door will lock. Therefore, the vehicle. Unsupervised use of vehicle equip- make sure the RKE Key Fob is not inside the vehicle ment may cause severe personal injuries or death.
Page 39: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Power Door Locks The doors can also be locked and unlocked with the Passive Entry feature system. Refer to “Keyless Enter- A power door lock switches is located on each of N-Go — Passive Entry” in “Things To Know Before the front door trim panels.
Page 40: Child-Protection Door Lock System - Rear Doors
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE auto door lock feature can be enabled or disabled by your NOTE: Use the Automatic Unlock Doors On Exit feature authorized dealer. The auto door lock feature is enabled/ in accordance with local laws. disabled in the Uconnect Settings.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: • When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. •...
Page 42: Keyless Enter-N-Go - Passive Entry
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • Passive Entry may be programmed ON/OFF; refer to Avoid trapping anyone in a vehicle in a collision. “Uconnect Settings” in “Understanding Your Instru- Remember that the rear doors can only be opened ment Panel”...
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 To Unlock From The Passenger Side With a valid Passive Entry RKE Key Fob within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors and the liftgate automatically.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE FOBIK-Safe only executes in vehicles with passive entry. NOTE: The vehicle will only unlock the doors when a There are three situations that trigger a FOBIK-Safe valid Passive Entry RKE Key Fob is detected inside the search in any passive entry vehicle: vehicle, and no valid Passive Entry RKE Key Fob is detected outside the vehicle.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC/DID (if equipped), all doors will unlock when you push the electronic release on the liftgate. If Unlock Driver Door 1st Press is programmed in Uconnect, the liftgate will unlock when you push the electronic release on the liftgate.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DO NOT grab the door handle, when pushing the door handle lock button. This could unlock the door(s). DO NOT Grab The Door Handle When Locking Push The Door Handle Button To Lock...
Page 47: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 NOTE: General Information • After pushing the door handle button, you must wait The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 48: Windows
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS There are single window controls on each passenger door trim panel, which operate the passenger door windows. Power Windows The window controls will operate only when the ignition The window controls on the drivers door control all the is in the ACC or ON/RUN position.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 AUTO-Down Feature To stop the window from going all the way up during the AUTO-Up operation, push down on the switch The driver door power window switch and some model briefly. passenger door power window switches have an AUTO- Down feature.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Switch WARNING! The window lockout switch on the driver’s door There is no anti-pinch protection when the window trim panel allows you to disable the window controls is almost closed. Be sure to clear all objects from the on the rear passenger doors.
Page 51: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 be minimized. If the buffeting occurs with the rear windows open, open the front and rear windows to- gether to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC/DID if equipped, all doors will unlock when you push the electronic release on the liftgate. If Unlock Driver Door 1st Press is programmed in Uconnect Settings, only the liftgate will unlock when you push the electronic release on the liftgate.
Page 53: Power Liftgate - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 The power liftgate may also be opened or closed by WARNING! pushing the LIFTGATE button located on the front overhead console. If the liftgate is fully open, the liftgate Driving with the liftgate open can allow poisonous can be closed by pushing the LIFTGATE button located exhaust gases into your vehicle.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: NOTE: • In the event of a power malfunction to the liftgate, an • The power liftgate buttons will not operate if the emergency liftgate latch release can be used to open vehicle is in gear or the vehicle speed is above 0 mph the liftgate.
Page 55: Occupant Restraint Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • If the liftgate is not fully open, push the Liftgate button WARNING! on the RKE Key Fob twice to operate the liftgate. • Driving with the liftgate open can allow poisonous •...
Page 56: Important Safety Precautions
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Child Restraints a vehicle with a rear seat in child restraints or belt- positioning booster seats. Older children who do not Important Safety Precautions use child restraints or belt-positioning booster seats Please pay close attention to the information in this should ride properly buckled up in a vehicle with a section.
Page 57: Seat Belt Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 side air bags will inflate forcefully into the space Seat Belt Systems between occupants and the door and occupants could Buckle up even though you are an excellent driver, even be injured. on short trips.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE their seat belts. The Belt Alert feature is active when- and the driver or outboard front seat passenger is un- ever the ignition is placed in the START or ON/RUN buckled (if equipped with outboard front passenger seat position.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The outboard front passenger seat BeltAlert is not active Lap/Shoulder Belts when the outboard front passenger seat is unoccupied. All seating positions in your vehicle are equipped with BeltAlert may be triggered when an animal or other items lap/shoulder belts.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • In a collision, you and your passengers can suffer suffer internal injuries, or you could even slide out much greater injuries if you are not properly buck- of the seat belt.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! (Continued) WARNING! (Continued) seat belt is flat against your body, without twists. If injury. A seat belt worn under the arm can cause you can’t straighten a seat belt in your vehicle, take internal injuries.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat).
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE stowed position. If necessary, slide the latch plate 3. Slide the latch plate upward over the folded webbing. down the webbing to allow the seat belt to retract The folded webbing must enter the slot at the top of fully.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release but- ton.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts And Pregnant Women WARNING! • ONLY use a Seat Belt Extender if it is physically required in order to properly fit the original seat belt system. DO NOT USE the Seat Belt Extender if, when worn, the distance between the front edge of the Seat Belt Extender buckle and the center of the occupant’s body is LESS than 6 inches.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Position the lap belt snug and low below the abdomen The pretensioners are triggered by the Occupant Re- and across the strong bones of the hips. Place the straint Controller (ORC). Like the air bags, the preten- shoulder belt across the chest and away from the neck.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Restraints” section of this manual. The table below If the passenger seating position is equipped with an defines the type of feature for each seating position. ALR and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the ALR.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 How To Disengage The Automatic Locking Mode WARNING! Unbuckle the combination lap/shoulder belt and allow it • Never place a rear-facing child restraint in front of to retract completely to disengage the Automatic Locking an air bag.
Page 70: Supplemental Restraint System (Srs)
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Side Air Bags WARNING! (Continued) • Supplemental Knee Air Bags only used to install rear-facing or forward-facing child restraints that have a harness for restraining • Front and Side Impact Sensors the child.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE output appropriate to the severity and type of collision as WARNING! determined by the Occupant Restraint Controller (ORC), • No objects should be placed over or near the air which may receive information from the front impact sensors or other system components.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Because air bag sensors measure vehicle deceleration WARNING! (Continued) over time, vehicle speed and damage by themselves are some collisions, air bags won’t deploy at all. Al- not good indicators of whether or not an air bag should ways wear your seat belts even though you have air have deployed.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Occupant Classification System (OCS) — Front weight on the seat will be sensed by the Sensor. The OCM Passenger Seat uses input from the Sensor to determine the front pas- senger’s most probable classification. The OCM commu- The OCS is part of a Federally regulated safety system for nicates this information to the ORC.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 • The front passenger seat is occupied by a rear-facing * It is possible for a child to be classified as an adult, child restraint; or allowing a full-power Passenger Advanced Front Air Bag deployment.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The OCS determines the front passenger’s most probable classification. The OCS estimates the seated weight on the front passenger seat and where that weight is located. The OCS communicates the classification status to the ORC.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Do not decrease OR increase the front passenger’s Examples of improper front passenger seating include: seated weight on the front passenger seat • The front passenger’s weight is transferred to another The front passenger’s seated weight must be properly part of the vehicle (like the door, arm rest or instru- positioned on the front passenger seat.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Accessories that may change the seated weight on the front passenger seat are attached to the front passenger seat. • Anything that may decrease or increase the front passenger’s seated weight. The OCS determines the front passenger’s most probable classification.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Not Seated Properly Not Seated Properly...
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) signal to the OCS that is different from the occu- pant’s properly seated weight input. This may result in serious injury or death in a collision. • Always wear your seat belt and sit properly, with the seatback in an upright position, your back against the seatback, sitting upright, facing for- ward, in the center of the seat, with your feet...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Do not make any modifications to the front passenger WARNING! (Continued) seat components, assembly, or to the seat cover. If the properly, which may result in serious injury or seat, trim cover, or cushion needs service for any reason, death in a collision.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • At no time should any Supplemental Restraint System Knee Impact Bolsters (SRS) component or SRS related component or fastener The Knee Impact Bolsters help protect the knees of the be modified or replaced with any part except those driver and front passenger, and position the front occu- which are approved by FCA US LLC.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Bag mounted in the instrument panel below the glove compartment. The Supplemental Knee Air Bags provide enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and Advanced Front Air Bags.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the seam on the outboard side of the seat cushion’s trim cover (outboard rear seats — if equipped with rear SABs). The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the...
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 2. Supplemental Side Air Bag Inflatable Curtains SABICs may help reduce the risk of head or other injuries (SABICs): Located above the side windows. The trim to front and rear seat outboard occupants in certain side covering the SABICs is labeled “SRS AIRBAG”...
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to WARNING! activate in certain side impacts and certain rollover • Your vehicle is equipped with left and right events. The Occupant Restraint Controller (“ORC”) de- termines whether the deployment of the Side Air Bags in Supplemental Side Air Bag Inflatable Curtains a particular side impact or rollover event is appropriate,...
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 help keep you in position, away from inflating Side Air WARNING! (Continued) Bags. To get the best protection from the Side Air Bags, properly. In some collisions, Side Air Bags won’t occupants must wear their seat belts properly and sit deploy at all.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all side collisions, A faster-developing event may deploy the seat belt including some collisions at certain angles, or some side pretensioners as well as the Side Air Bags on both sides of collisions that do not impact the area of the passenger the vehicle.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 deploy and unfold. The abrasions are similar to fric- Do not drive your vehicle after the air bags have de- tion rope burns or those you might get sliding along a ployed. If you are involved in another collision, the air carpet or gymnasium floor.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System Enhanced Accident Response System Reset Procedure In the event of an impact, if the communication network remains intact, and the power remains intact, depending In order to reset the Enhanced Accident Response System on the nature of the event, the ORC will determine functions after an event, the ignition must be changed whether to have the Enhanced Accident Response Sys-...
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 START or ON/RUN position. If the ignition is in the OFF diagnostics also record the nature of the malfunction. position or in the ACC position, the air bag system is not While the air bag system is designed to be maintenance on and the air bags will not inflate.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Redundant Air Bag Warning Light comes on WARNING! intermittently or remains on while driving have an authorized dealer service the vehicle immediately. For Ignoring the Air Bag Warning Light in your instru- additional information regarding the Redundant Air Bag ment panel could mean you won’t have the air bags Warning Light refer to the “Warning and Indicator...
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Event Data Recorder (EDR) WARNING! (Continued) This vehicle is equipped with an event data recorder modify the front bumper, vehicle body structure, or (EDR). The main purpose of an EDR is to record, in add aftermarket side steps or running boards.
Page 94: Child Restraints
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE These data can help provide a better understanding of Child Restraints the circumstances in which crashes and injuries occur. Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the NOTE: EDR data are recorded by your vehicle only if a United States, and every Canadian province, requires non-trivial crash situation occurs;...
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 seat Owner’s Manual to make sure you have the correct NOTE: seat for your child. Carefully read and follow all the • For additional information, refer instructions and warnings in the child restraint Owner’s www.seatcheck.org or call 1-866-732-8243.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Small Children Children who are at least two years Forward-Facing Child Restraint with a five- old or who have out-grown the point Harness, facing forward in the rear height or weight limit of their rear- seat of the vehicle...
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 direction than infant carriers do, so they can be used Older Children And Child Restraints rear-facing by children who have outgrown their infant Children who are two years old or who have outgrown carrier but are still less than at least two years old.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seat. The child and belt-positioning booster seat are held WARNING! (Continued) in the vehicle by the seat belt. • When your child restraint is not in use, secure it in the vehicle with the seat belt or LATCH anchor- WARNING! ages, or remove it from the vehicle.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 2. Do the child’s knees bend comfortably over the front position. If the shoulder belt contacts the face or neck, of the vehicle seat – while they are still sitting all the move the child closer to the center of the vehicle, or use way back? a booster seat to position the seat belt on the child...
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint anchor- (LATCH) Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol...
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit 65 lbs (29.5 kg) Use the LATCH anchorage system until the combined (child’s weight + weight weight of the child and the child restraint is 65 lbs of the child restraint) for (29.5 kg).
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH Can two child restraints Never “share” a LATCH anchorage with two or more be attached using a com- child restraints. If the center position does not have mon lower LATCH an- dedicated LATCH lower anchorages, use the seat belt chorage?
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether strap. The tether strap will have a hook at the end to attach to the top tether anchorage and a way to tighten the strap after it is attached to the anchorage. Center Seat LATCH This vehicle has 5 lower LATCH anchorages in the rear seat.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 can use either the LATCH anchors or the vehicle’s seat seating positions using lower anchorages A and B, and belt for installing the third child seat in position (1) D and E. Do not use the center seat anchorage, C. If the behind the front passenger.
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) the LATCH anchors or the vehicle’s seat belt for • Use anchorages C and D to install a LATCH- installing the child seat in position (1), behind the compatible child restraint in the center seating front passenger.
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 1. Loosen the adjusters on the lower straps and on the 4. If the child restraint has a tether strap, connect it to the tether strap of the child seat so that you can more top tether anchorage.
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Stow An Unused Switchable (ALR) Seat WARNING! Belt: • Improper installation of a child restraint to the When using the LATCH attaching system to install a LATCH anchorages can lead to failure of the re- child restraint, stow all ALR seat belts that are not being straint.
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 necessary to use a locking clip. The ALR retractor can be Lap/Shoulder Belt Systems For Installing Child “switched” into a locked mode by pulling all of the Restraints In This Vehicle webbing out of the retractor and then letting the webbing retract back into the retractor.
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to...
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 114 112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. See the section “Installing Child Restraints WARNING! (Continued) Using the Top Tether Anchorage” for directions to tether strap of a rear-facing car seat to the tether attach a tether anchor. anchorage that is approved for that seating position, 9.
Page 115 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available. 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and...
Page 116: Transporting Pets
114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
Page 117: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 CAUTION! WARNING! • Do not leave children or animals inside parked Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 118: Exhaust Gas
116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) controls to force outside air into the vehicle. Set the WARNING! blower at high speed. Exhaust gases can injure or kill. They contain carbon The best protection against carbon monoxide entry into monoxide (CO), which is colorless and odorless.
Page 119: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 Safety Checks You Should Make Inside The driving, have the system inspected at an authorized Vehicle dealer as soon as possible. This light will illuminate with a single chime when a fault with the Air Bag Seat Belts Warning Light has been detected, it will stay on until Inspect the seat belt system periodically, checking for...
Page 120 118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE cannot slip out of position and interfere with the pedals WARNING! (Continued) or impair safe operation of your vehicle in other ways. mats and other coverings will reduce the size of the pedal area and interfere with the pedals.
Page 121: Periodic Safety Checks You Should Make Outside
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 123: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Sun Visor “Slide-On-Rod” Feature — MIRRORS ......128 If Equipped .
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Front Heated Seats — If Equipped ..153 ▫ Automatic Headlights — If Equipped ..168 ▫ Front Ventilated Seats — If Equipped ..154 ▫...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 ▫ Flash-To-Pass ......173 ELECTRONIC SPEED CONTROL — IF EQUIPPED ......185 ▫...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Cancel ......195 FORWARD COLLISION WARNING (FCW) WITH MITIGATION —...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 ▫ ParkSense Display .....244 PARKSENSE REAR PARK ASSIST — IF EQUIPPED ......231 ▫...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Closing Sunroof — Express....296 GARAGE DOOR OPENER — IF EQUIPPED . . .285 ▫ Before You Begin Programming HomeLink . . .286 ▫...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 ▫ Cargo Extension Panels ....312 WIRELESS CHARGING PAD — IF EQUIPPED .304 ▫ Wireless Charging Pad Operation ..305 ▫...
Page 130: Mirrors
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. NOTE: The Automatic Dimming Mirror feature is dis- abled when the vehicle is in reverse gear to improve rear view viewing.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ASSIST Call WARNING! The ASSIST Button is used to automatically connect you ALWAYS obey traffic laws and pay attention to the to any one of the following support centers: road. Some Uconnect Access services, including 9-1-1 •...
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • The vehicle brand. 9-1-1 Call • The last known GPS coordinates of the vehicle. 1. Push the 9-1-1 Call button on the Rearview Mirror. 4. You should be able to speak with the 9-1-1 operator NOTE: In case the 9-1-1 Call button is pushed in error, through the vehicle audio system to determine if there will be a 10 second delay before the 9-1-1 Call...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! • Your vehicle may be transmitting data as authorized • If anyone in the vehicle could be in danger (e.g., by the subscriber. fire or smoke is visible, dangerous road conditions •...
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 9-1-1 Call System Limitations WARNING! (Continued) Vehicles sold in Canada and Mexico DO NOT have 9-1-1 electrical equipment to the vehicle’s electrical sys- Call system capabilities. tem. This may prevent your vehicle from sending a signal to initiate an emergency call.
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The ignition key is in OFF position. WARNING! • The vehicle’s electrical systems are not intact. • Ignoring the Rearview Mirror light could mean you • The 9-1-1 Call system software and/or hardware are will not have 9-1-1 Call services.
Page 137: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 General Information WARNING! This device complies with Part 15 of the FCC Rules. ALWAYS obey traffic laws and pay attention to the Operation is subject to the following two conditions: (1) road. Some Uconnect Access services, including 9-1-1 This device may not cause harmful interference, and (2) and Assist, will NOT work without an operable 1X this device must accept any interference received, includ-...
Page 138: Power Mirrors
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle. WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
Page 139: Power Folding Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 to move the mirror in the direction the arrow is pointing. Push the switch once and the mirrors will fold in, The selection will time out after 30 seconds of inactivity pushing the switch a second time will return the mirrors to guard against accidentally moving a mirror position to the normal driving position.
Page 140: Heated Mirrors - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the mirrors are in the folded position, and vehicle Heated Mirrors — If Equipped speed is equal or greater than 10 mph (16 km/h), they will automatically unfold. These mirrors are heated to melt frost or ice. This Resetting The Power Folding Outside Mirrors feature can be activated whenever you turn on the rear window defroster (if equipped).
Page 141: Sun Visor "Slide-On-Rod" Feature - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirror to extend it. BLIND SPOT MONITORING (BSM) — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM detection zone covers approximately one lane width on both sides of the vehicle 12 ft (3.8 m). The zone length starts at the outside mirror and extends approxi- mately 10 ft (3 m) beyond the rear bumper of the vehicle. The BSM system monitors the detection zones on both sides of the vehicle when the vehicle speed reaches approximately 6 mph (10 km/h) or higher and will alert...
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 beyond the side of your vehicle, this may result in the BSM warning light remaining illuminated the entire time the vehicle is in a forward gear. The area on the rear fascia where the radar sensors are located must remain free of snow, ice, and dirt/road contamination so that the BSM system can function properly.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking/Passing Stationary Objects The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc.
Page 147: Rear Cross Path (Rcp)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 WARNING! (Continued) system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicles mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
Page 149: Modes Of Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Modes Of Operation turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime Three selectable modes of operation are available in the will also be sounded.
Page 150: General Information
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The BSM system will store the current operating SEATS mode when the vehicle is shut off. Each time the vehicle Seats are a part of the Occupant Restraint System of the is started the previously stored mode will be recalled and vehicle.
Page 151: Power Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Power Seats — If Equipped Reclining The Seatback Forward Or Rearward Some models may be equipped with a power driver’s The seatback can be reclined both forward and rearward. seat. The power seat switch is located on the outboard Push the seat recliner switch forward or rearward.
Page 152: Manual Seats - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Power Lumbar —...
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pull upward on the lever to raise the seat height or push downward on the lever to lower the seat height.
Page 155: Front Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Front Heated Seats — If Equipped NOTE: The engine must be running for the heated seats to operate. The front heated seats control buttons are located within the Uconnect system. You can gain access to the control Vehicles Equipped With Remote Start buttons through the climate screen or the controls screen.
Page 156: Front Ventilated Seats - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The front ventilated seats control buttons are located WARNING! (Continued) within the Uconnect system. You can gain access to the even at low temperatures, especially if used for control buttons through the climate screen or the controls long periods of time.
Page 157: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 This feature can be programmed through the Uconnect NOTE: Do not reverse the head restraints (making the system. Refer to “Uconnect Settings” in “Understanding rear of the head restraint face forward) in an attempt to Your Instrument Panel”...
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To remove the head restraint, raise it as far as it can go then push the release button and the adjustment button at the base of each post while pulling the head restraint up.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Rear Head Restraints WARNING! The rear outboard head restraints have three positions Up, • A loose head restraint thrown forward in a colli- Mid and Down. The center head restraint has only two sion or hard stop could cause serious injury or positions, Up and Down.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outboard Head Restraint Center Head Restraint 1 — Release Button 1 — Adjustment Button 2 — Adjustment Button 2 — Release Button...
Page 161: 60/40 Split Folding Rear Seat With Fold-Flat Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 WARNING! WARNING! • It is extremely dangerous to ride in a cargo area, ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the inside or outside of a vehicle. In a collision, people re-installation instructions above prior to operating riding in these areas are more likely to be seriously the vehicle or occupying a seat.
Page 162 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Adjustment Bar Rear Seatback Release Lever And Pull Strap To Lower The Rear Seat 2. Fold the rear seatback completely forward. 1. Lift the seatback release lever located on the upper NOTE: You may experience deformation in the seat outer edge of the seat or pull the pull strap located on cushion from the seat belt buckles if the seats are left...
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 To Raise The Rear Seat NOTE: If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. Raise the seatback and lock it into place. WARNING! Be certain that the seatback is securely locked into position.
Page 164: Driver Memory Seat - If Equipped
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors and a set of desired radio station presets.
Page 165: Linking And Unlinking The Remote Keyless Entry Key Fob To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 2. Adjust all memory profile settings to desired prefer- NOTE: ences (i.e., seat, side mirror and radio station presets). • Memory profiles can be set without the vehicle in 3. Push and release the SET button on the memory PARK, but the vehicle must be in PARK to recall a switch, then push the number (1) button within five memory profile.
Page 166: Memory Position Recall
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before programming your RKE Key Fob you 4. Push and release the LOCK button on the RKE Key must select the “Memory To FOB” feature through the Fob within 10 seconds. Uconnect system screen. Refer to “Uconnect Settings” in NOTE: Your RKE Key Fob can be unlinked to your “Understanding Your Instrument Panel”...
Page 167: Easy Entry/Exit Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 A recall can be cancelled by pushing any of the MEMORY stop. The seat will return to its previously set position buttons (S, 1, or 2) during a recall. When a recall is when you cycle the vehicle’s ignition to the ACC or cancelled, the driver seat will stop moving.
Page 168: To Open And Close The Hood
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Move to the outside of the vehicle and pull the safety latch release lever forward (toward you). The safety Two latches must be released to open the hood. latch release lever is located behind the front edge of 1.
Page 169: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 LIGHTS WARNING! Headlight Switch Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open The headlight switch is located on the left side of when the vehicle is in motion and block your vision.
Page 170: Automatic Headlights - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation.
Page 171: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 is set to ON. In addition, the headlights will turn off If you turn the headlights or parking lights on, or place when the wipers are turned off if they were turned on by the ignition in ACC or RUN, the system will cancel the this feature.
Page 172: Automatic High Beam Headlamp Control - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic High Beam Headlamp Control — If and other obstructions on the windshield or camera Equipped lens will cause the system to function improperly. • To opt out of the Advanced Auto High-Beam Sensitiv- The Automatic High Beam Headlamp Control system provides increased forward lighting at night by automat- ity Control (default) and enter Reduced High-Beam...
Page 173: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 NOTE: If allowed by law in the country in which the vehicle was purchased the Daytime Running Lights can be turned on and off using the Uconnect System, refer to “Uconnect Settings” in “Understanding Your Instrument Panel”...
Page 174: Multifunction Lever
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE An indicator light in the instrument cluster illuminates when the fog lights are turned on. NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights.
Page 175: Lane Change Assist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: Lane Change Assist • If either light remains on and does not flash, or there is Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash a very fast flash rate, check for a defective outside light three times then automatically turn off.
Page 176: Interior Lights
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE switch on either side of the console. To turn the lights off, There are courtesy lights located above the front seats. push the switch a second time. These lights also turn on The courtesy lights can be turned on by pushing the lens. when a door is opened, or when the UNLOCK button on To turn the lights off, push the lens a second time.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Instrument Panel Dimmer Control The instrument panel dimmer control is part of the headlight switch and is located on the drivers side of the instrument panel. With the parking lights or headlights on, rotating the instrument panel dimmer control upward will increase the brightness of the instrument panel lights and lighted cupholders —...
Page 178: Battery Saver Feature
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Defeat (OFF) Rotate the instrument panel dimmer control to the ex- treme bottom OFF position. The interior lights will remain off when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the instrument panel dimmer control upward to the first detent.
Page 179: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer controls are located on the windshield wiper/washer lever on the right side of the steering column. The front wipers are operated by rotat- ing a switch, located on the end of the lever. For infor- mation on the rear wiper/washer, refer to “Rear Window Features”...
Page 180: Intermittent Wiper System
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) turned off, and the blades cannot return to the “park” position, damage to the wiper motor may occur. Intermittent Wiper System Use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable.
Page 181: Windshield Washer Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 while in the intermittent setting, the wipers will turn on and operate for several wipe cycles after the lever is released, and then resume the intermittent interval pre- viously selected. Intermittent Wiper Operation NOTE: If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled.
Page 182: Mist
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the lever is pulled while the wipers are in the off NOTE: The mist feature does not activate the washer position, the wipers will operate for several wipe cycles, pump; therefore, no washer fluid will be sprayed on the then turn off.
Page 183: Windshield Wiper De-Icer - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Windshield Wiper De-Icer — If Equipped resume previous operation except, if the Windshield Wiper De-Icer timer and operation shall continue. Your vehicle may be equipped with a Windshield Wiper De-Icer feature that may be activated under the following Rain Sensing Wipers —...
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Low Ambient Temperature — When the ignition is NOTE: first turned ON, the Rain Sensing system will not • The Rain Sensing feature will not operate when the operate until the wiper switch is moved, vehicle speed wiper switch is in the low or high-speed position.
Page 185: Tilt/Telescoping Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 TILT/TELESCOPING STEERING COLUMN To unlock the steering column, push the control handle downward (toward the floor). To tilt the steering column, This feature allows you to tilt the steering column move the steering wheel upward or downward as de- upward or downward.
Page 186: Heated Steering Wheel - If Equipped
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HEATED STEERING WHEEL — IF EQUIPPED NOTE: The engine must be running for the heated steering wheel to operate. The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering Vehicles Equipped With Remote Start wheel has only one temperature setting.
Page 187: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 WARNING! (Continued) cause burns even at low temperatures, especially if used for long periods. • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material.
Page 188: To Activate
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 189: To Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 To Deactivate The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “Under- A soft tap on the brake pedal, pushing the CANCEL standing Your Instrument Panel” for more information. button, or normal brake pressure while slowing the The speed increment shown is dependant on the chosen vehicle will deactivate the Electronic Speed Control with-...
Page 190: To Accelerate For Passing
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • If the button is continually pushed, the set speed will continue to increase until the button is released, then continue to decrease until the button is released, then the new set speed will be established.
Page 191: Adaptive Cruise Control (Acc) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 NOTE: The Electronic Speed Control system maintains ADAPTIVE CRUISE CONTROL (ACC) — IF speed up and down hills. A slight speed change on EQUIPPED moderate hills is normal. Adaptive Cruise Control (ACC) increases the driving convenience provided by cruise control while traveling On steep hills, a greater speed loss or gain may occur so on highways and major roadways.
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the ACC sensor detects a vehicle ahead, ACC will You can change the mode by using the Cruise Control apply limited braking or acceleration (not to exceed buttons. The two control modes function differently. the original set speed) automatically to maintain a Always confirm which mode is selected.
Page 193: Adaptive Cruise Control (Acc) Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 WARNING! (Continued) WARNING! (Continued) • The ACC system: You should switch off the ACC system: • Does not react to pedestrians, oncoming vehicles, • When driving in fog, heavy rain, heavy snow, sleet, and stationary objects (e.g., a stopped vehicle in a heavy traffic, and complex driving situations (i.e., traffic jam or a disabled vehicle).
Page 194: Activating Adaptive Cruise Control (Acc)
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Any chassis/suspension or tire size modifications to the vehicle will effect the performance of the Adaptive Cruise Control and Forward Collision Warning System. Activating Adaptive Cruise Control (ACC) You can only engage ACC if the vehicle speed is above 0 mph (0 km/h).
Page 195: To Activate/Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 • When in Four-Wheel Drive Low. • When you apply the brakes. • When the parking brake is set. • When the automatic transmission is in PARK, RE- VERSE or NEUTRAL. • When the Vehicle speed is outside of the speed range. •...
Page 196: To Set A Desired Acc Speed
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) You could lose control and have a collision. Always leave the system off when you are not using it. To Set A Desired ACC Speed When the vehicle reaches the speed desired, push the SET + button or the SET - button and release.
Page 197: To Cancel
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 • The Electronic Stability Control/Traction Control Sys- Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set tem (ESC/TCS) activates. speed. If this occurs: •...
Page 198: To Resume
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Normal (Fixed Speed) Electronic Speed Control WARNING! ON/OFF button is pushed. The Resume function should only be used if traffic • The ignition is turned OFF. and road conditions permit. Resuming a set speed •...
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 • If the button is continually pushed, the set speed will The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h): continue to increase in 10 km/h increments until the button is released.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • When you use the SET - button to decelerate, if the continue to decrease in 5 mph decrements until the engine’s braking power does not slow the vehicle button is released.
Page 201: Setting The Following Distance In Acc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between four bars (longest), three bars (long), two bars (medium) and one bar (short). Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 3 Bars (Long) Distance Setting 2 Bars (Medium)
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 To decrease the distance setting, push the Distance Set- ting — Decrease button and release. Each time the button is pushed, the distance setting decreases by one bar (shorter). If there is no vehicle ahead, the vehicle will maintain the set speed.
Page 204 202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system disengages. (Refer to the information on ACC Activation). The maximum braking applied by ACC is limited; how- ever, the driver can always apply the brakes manually, if necessary. NOTE: The brake lights will illuminate whenever the ACC system applies the brakes.
Page 205: Overtake Aid
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 Overtake Aid NOTE: After the ACC system holds your vehicle at a standstill for approximately 3 consecutive minutes, the When driving with ACC engaged and following a ve- parking brake will be activated, and the ACC system will hicle, the system will provide an additional acceleration be cancelled.
Page 206: Adaptive Cruise Control (Acc) Menu
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Menu Push the SET + or the SET- button (located on the steering wheel) and the following will display in the EVIC/DID: The EVIC/DID displays the current ACC system set- tings.
Page 207: Display Warnings And Maintenance
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Display Warnings And Maintenance vehicle has left these areas. Under rare conditions, when the radar is not tracking any vehicles or objects in its path “Wipe Front Radar Sensor In Front Of Vehicle” this warning may temporarily occur.
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not remove any screws from the sensor. Doing so NOTE: could cause an ACC system malfunction or failure and • If the “ACC/FCW Unavailable Wipe Front Radar require a sensor realignment. Sensor”...
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 obstructions, such as mud, dirt, or ice on windshield and When the condition that created limited functionality is fog on the inside of glass. In these cases, the EVIC/DID no longer present, the system will return to full function- will display “ACC/FCW Limited Functionality Clean ality.
Page 210: Precautions While Driving With Acc
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Precautions While Driving With ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpect- edly. The driver needs to stay alert and may need to intervene.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 the vehicle is out of the curve the system will resume Using ACC On Hills your original Set Speed. This is a part of normal ACC When driving on hills, ACC may not detect a vehicle in system functionality.
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC may not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC system to take action.
Page 213: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Narrow Vehicle Example Stationary Object And Stationary Vehicle Example Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary This vehicle has systems that operate on radio frequency vehicles.
Page 214: Normal (Fixed Speed) Electronic Speed Control Mode
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation is subject to the following two conditions: To change between the different control modes, push the ADAPTIVE CRUISE CONTROL (ACC) ON/OFF button 1. The device may not cause harmful interference. which turns the ACC and the NORMAL (Fixed Speed) 2.
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 To Vary The Speed Setting WARNING! (Continued) To Increase Speed the vehicle ahead. Always be aware which mode is selected. When the Normal (Fixed Speed) Electronic Speed Con- trol is set, you can increase speed by pushing the SET + To Set A Desired Speed button.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will The drivers preferred units can be selected through the continue to increase in 5 mph increments until the instrument panel settings if equipped. Refer to “Under- button is released.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 • If the button is continually pushed, the set speed will • The gear selector is removed from the Drive position. continue to decrease in 10 km/h decrements until the To Resume Speed button is released.
Page 218: Forward Collision Warning (Fcw) With Mitigation - If Equipped
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE FORWARD COLLISION WARNING (FCW) WITH If the driver does not take action based upon these MITIGATION — IF EQUIPPED progressive warnings, then the system will provide a limited level of active braking to help slow the vehicle Forward Collision Warning (FCW) With Mitigation and mitigate the potential forward collision.
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 NOTE: • The minimum speed for FCW activation is 1 mph (2 km/h). • The FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction.
Page 220: Turning Fcw On Or Off
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Forward Collision Warning (FCW) is not intended to avoid a collision on its own, nor can FCW detect every type of potential collision. The driver has the responsibility to avoid a collision by controlling the vehicle via braking and steering.
Page 221: Changing Fcw And Active Braking Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 • Changing the FCW status to “Off” prevents the system Changing FCW And Active Braking Status from warning you of a possible collision with the The FCW Sensitivity And Active Braking Settings are vehicle in front of you.
Page 222: Fcw Limited Warning
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: limited the system performance is no longer present, the system will return to its full performance state. If the • The system will retain the last setting selected by the problem persists, see your authorized dealer. driver after ignition shut down.
Page 223: Turning Lanesense On Or Off
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 LaneSense system uses a forward looking camera to visual warning through the EVIC/DID to prompt the detect lane markings and measure vehicle position driver to remain within the lane. When only a single lane within the lane boundaries.
Page 224 222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LaneSense Warning Button Lane Sense On Message To turn the LaneSense system ON, push the LaneSense To turn the LaneSense system OFF, push the LaneSense button to turn the system ON (LED turns off). A “Lane button once to turn the system OFF (LED turns on).
Page 225: Lanesense Warning Message
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 LaneSense Warning Message The LaneSense system will indicate the current lane drift condition through the Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID). 3.5 EVIC Screen — If Equipped When the LaneSense system is ON; the lane lines are gray when both of the lane boundaries have not been detected and the LaneSense indicator is solid white.
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the LaneSense system senses the lane has been NOTE: The LaneSense system operates with the similar approached and is in a lane departure situation, the behavior for a right lane departure when only the right left thick lane line flashes from white to gray, the left lane marking has been detected.
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 • For example: If approaching the left side of the lane the steering wheel will turn to the right. Lanes Sensed (White Lines/Green Indicator) • When the LaneSense system senses a lane drift situa- tion, the left thick lane line and the left thin line turn Lane Sensed (Solid White Thick Line, Solid White Thin Line/Solid Yellow Indicator)
Page 228 226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE thin line remains solid white and the LaneSense indi- cator changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. •...
Page 229 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 7.0 DID Screen — If Equipped Left Lane Departure — Only Left Lane Detected • When the LaneSense system is ON, the LaneSense When the LaneSense system is ON; the lane lines are gray when both of the lane boundaries have not been detected indicator is solid white when only the left lane mark- and the LaneSense indicator is solid white.
Page 230 228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Left Lane Departure — Both Lanes Detected • When the LaneSense system is ON, the lane lines turn from gray to white to indicate that both of the lane markings have been detected. The LaneSense indicator is solid green when both lane markings have been detected and the system is “armed”...
Page 231 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 • For example: If approaching the left side of the lane the steering wheel will turn to the right. Lanes Sensed (White Lines/Green Indicator) • When the LaneSense system senses a lane drift situa- tion, the left thick lane line and left thin line turn solid Lane Sensed (Solid Yellow Thick Line, Solid Yellow Thin Line/Solid Yellow Indicator)
Page 232 230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE thin line remains solid yellow. The LaneSense indicator changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. •...
Page 233: Changing Lanesense Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 Changing LaneSense Status PARKSENSE REAR PARK ASSIST — IF EQUIPPED The LaneSense system has settings to adjust the intensity of the torque warning and the warning zone sensitivity The ParkSense Rear Park Assist system provides visual (early/late) that you can configure through the Uconnect and audible indications of the distance between the rear system screen.
Page 234: Parksense Sensors
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Display (DID) indicating the vehicle speed is too fast. The The ParkSense Warning screen is located within the system will become active again if the vehicle speed is EVIC/DID. It provides visual warnings to indicate the decreased to speeds less than approximately 6 mph distance between the rear fascia/bumper and the de- (9 km/h).
Page 235 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 show the single arc moving closer to the vehicle and the sound tone will change from slow, to fast, to continuous. If an obstacle is detected in the left and/or right rear region, the display will show a single flashing arc in the left and/or right rear region and will produce a fast sound tone.
Page 236 234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone/Solid Arc Slow Tone/Solid Arc...
Page 237 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle:...
Page 238 236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Dis- Greater 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than tance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 in (30 (in/cm) 79 in (200 Arcs —...
Page 239 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 WARNING ALERTS Rear Dis- Greater 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than tance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 in (30 (in/cm) 79 in (200 Audible None Single 1/2-...
Page 240: Enabling And Disabling Parksense
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling And Disabling ParkSense “PARKSENSE OFF” message for approximately five sec- onds. Refer to “Electronic Vehicle Information Center ParkSense can be enabled and disabled with the (EVIC)” in “Understanding Your Instrument Panel” or ParkSense switch, located on the switch panel below the “Driver Information Display (DID)”...
Page 241: Cleaning The Parksense System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 ignition cycle, and it will display the “PARKSENSE If “PARKSENSE UNAVAILABLE SERVICE REQUIRED” UNAVAILABLE WIPE REAR SENSORS” or the appears in the EVIC/DID, see an authorized dealer. “PARKSENSE UNAVAILABLE SERVICE REQUIRED” Cleaning The ParkSense System message.
Page 242 240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you turn ParkSense OFF, the instrument cluster • Use the ParkSense switch to turn the ParkSense system will display “PARKSENSE OFF” Furthermore, once OFF if objects such as bicycle carriers, trailer hitches, you turn ParkSense off, it remains off until you turn it etc.
Page 243: Parksense Front And Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 WARNING! (Continued) CAUTION! to check for pedestrians, animals, other vehicles, • ParkSense is only a parking aid and it is unable to obstructions, and blind spots before backing up. recognize every obstacle, including small obstacles. You are responsible for safety and must continue to Parking curbs might be temporarily detected or not pay attention to your surroundings.
Page 244 242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The automatic braking function may only be applied if up or moving forward, e.g. during a parking maneuver. If your vehicle is equipped with an Automatic Transmis- the vehicle deceleration is not enough to avoid collid- sion, the vehicle brakes may be automatically applied ing with a detected obstacle.
Page 245: Parksense Sensors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 NOTE: active until the vehicle speed is increased to approxi- mately 7 mph (11 km/h) or above. When in REVERSE • The driver is always responsible for controlling the and above the system’s operating speed, a warning will vehicle.
Page 246: Parksense Warning Display
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If your vehicle is equipped with the ParkSense The ParkSense Warning screen is located within the Active Park Assist system, six sensors will be located in Electronic Vehicle Information Center (EVIC) or Driver the rear fascia/bumper.
Page 247 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 If an obstacle is detected in the center rear region, the display will show a single solid arc in the center rear region and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the sound tone will change from slow, to fast, to continuous.
Page 248 246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone/Solid Arc Slow Tone/Solid Arc...
Page 249 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Fast Tone/Flashing Arc Fast Tone/Flashing Arc...
Page 250 248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone/Flashing Arc...
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 WARNING ALERTS Rear Dis- Greater 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than tance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 in (30 (in/cm) 79 in (200 Arcs —...
Page 252 250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Dis- Greater 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than tance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 in (30 (in/cm) 79 in (200 Radio Vol- ume Re- duced...
Page 253 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 If an obstacle is detected in the left and/or right front region, the display will show a single flashing arc in the left and/or right front region and will produce a fast sound tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the tone will change from fast to continuous.
Page 254 252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle:...
Page 255 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 WARNING ALERTS Front Distance Greater than 47-39 in 39-25 in 25-12 in Less than (in/cm) 47 in (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) 12 in (30 cm) Arcs — Left None None None 2nd Flashing...
Page 256: Enabling And Disabling Parksense
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the Uconnect System is equipped, chime volume settings will not be accessible from the EVIC/DID. The chime volume settings include LOW, MEDIUM, and HIGH. The factory default volume setting is MEDIUM. ParkSense will retain its last known configuration state through ignition cycles.
Page 257: Service The Parksense Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 “Driver Information Display (DID)” for further informa- FRONT SENSORS , or the PARKSENSE UNAVAIL- tion. When the gear selector is moved to REVERSE and ABLE SERVICE REQUIRED message for five seconds. the system is disabled, the EVIC/DID will display the When the gear selector is moved to Reverse and the “PARKSENSE OFF”...
Page 258: Cleaning The Parksense System
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE graphic will remain displayed for as long as the vehicle is Cleaning The ParkSense System in REVERSE. Refer to “Electronic Vehicle Information Clean the ParkSense sensors with water, car wash soap Center (EVIC) or Driver Information Display (DID)” for and a soft cloth.
Page 259 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 • When you move the gear selector to the REVERSE misinterpreting a close object as a sensor problem, position and ParkSense is turned off, the instrument causing the “PARKSENSE UNAVAILABLE SERVICE cluster will display “PARKSENSE OFF” for as long as REQUIRED”...
Page 260: Parksense Active Park Assist System - If Equipped
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) CAUTION! obstructions, and blind spots before backing up. • ParkSense is only a parking aid and it is unable to You are responsible for safety and must continue to recognize every obstacle, including small obstacles. pay attention to your surroundings.
Page 261 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 • During a semi-automatic maneuver, if the driver providing audible/visual instructions, and controlling the steering wheel. The ParkSense Active Park Assist touches the steering wheel after being instructed to system is defined as “semi-automatic” since the driver remove their hands from the steering wheel, the sys- maintains control of the accelerator, gear selector and tem will cancel, and the driver will be required to...
Page 262: Enabling And Disabling The Parksense Active Park Assist System
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling And Disabling The ParkSense Active To enable the ParkSense Active Park Assist system, push Park Assist System the ParkSense Active Park Assist switch once (LED turns on). The ParkSense Active Park Assist system can be enabled and disabled with the ParkSense Active Park Assist To disable the ParkSense Active Park Assist system, push switch, located on the switch panel below the Uconnect...
Page 263 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 • Pushing the ParkSense Front and Rear Park Assist • ParkSense Active Park Assist switch is activated. switch. • Driver’s door is closed. • Driver’s door is opened. • Rear liftgate is closed. •...
Page 264: Parallel Parking Space Assistance Operation/Display
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When pushed, the LED on the ParkSense Active Park NOTE: Assist switch will blink momentarily, and then the LED • When searching for a parking space, use the turn will turn OFF if any of the above conditions are not signal indicator to select which side of the vehicle you present.
Page 265 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 • When seeking for a parking space, the driver should drive as parallel or perpendicular (depending on the type of maneuver) to other vehicles as possible. • The feature will only indicate the last detected parking space (example: if passing multiple available parking spaces, the system will only indicate the last detected parking space for the maneuver).
Page 266 264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Space Found — Keep Moving Forward Space Found — Stop And Remove Hands From Wheel Once the vehicle is in position, you will be instructed to Once the vehicle is at a standstill with your hands stop the vehicle’s movement and remove your hands removed from the steering wheel, you will be instructed from the steering wheel.
Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Space Found — Shift To Reverse Check Surroundings — Wait For Steering To Complete When the driver places the gear selector into the RE- The system will then instruct the driver to check their VERSE position, the system may instruct the driver to surroundings and move backward.
Page 268 266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the system instructs the driver to remove their hands from the steering wheel, the driver should check their surroundings and begin to back up slowly. • The ParkSense Active Park Assist system will allow a maximum of six shifts between DRIVE and REVERSE.
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 When the vehicle has reached the end of its backward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle. The driver should check their their surroundings and stop the vehicle’s movement.
Page 270 268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Check Surroundings — Shift To Drive Check Surroundings — Wait For Steering To Complete When the driver places the gear selector into the DRIVE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move forward.
Page 271 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 Check Surroundings — Move Forward Check Surroundings — STOP When the vehicle has reached the end of its forward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle.
Page 272 270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Once the vehicle is in a standstill condition, the driver will be instructed to place the gear selector into the REVERSE position. Check Surroundings — Wait For Steering To Complete The system will then instruct the driver to check their surroundings and move backward.
Page 273: Perpendicular Parking Space Assistance Operation/Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Check Surroundings — Move Backward Active ParkSense Complete — Check Parking Position Your vehicle is now in the parallel park position. When Perpendicular Parking Space Assistance the maneuver is complete, the driver will be instructed to Operation/Display check the vehicle’s parking position.
Page 274 272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE steering wheel switch to change your parking space setting to a perpendicular maneuver. You may switch back to parallel parking if you desire. Once the driver pushes OK for a perpendicular parking maneuver, the “Active ParkSense Searching - Push OK to Switch to Parallel”...
Page 275 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 • When seeking for a parking space, the driver should NOTE: drive as parallel or perpendicular (depending on the • When searching for a parking space, use the turn type of maneuver) to other vehicles as possible. signal indicator to select which side of the vehicle you •...
Page 276 274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Space Found — Keep Moving Forward Space Found — Stop And Remove Hands From Wheel Once the vehicle is in position, you will be instructed to Once the vehicle is at a standstill with your hands stop the vehicle’s movement and remove your hands removed from the steering wheel, you will be instructed from the steering wheel.
Page 277 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Space Found — Shift To Reverse Check Surroundings — Wait For Steering To Complete When the driver places the gear selector into the RE- The system will then instruct the driver to check their VERSE position, the system may instruct the driver to surroundings and move backward.
Page 278 276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the system instructs the driver to remove their hands from the steering wheel, the driver should check their surroundings and begin to back up slowly. • The ParkSense Active Park Assist system will allow a maximum of six shifts between DRIVE and REVERSE.
Page 279 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 When the vehicle has reached the end of its backward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle. The driver should check their their surroundings and stop the vehicle’s movement.
Page 280 278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Check Surroundings — Shift To Drive Check Surroundings — Wait For Steering To Complete When the driver places the gear selector into the DRIVE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move forward.
Page 281 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 Check Surroundings — Move Forward Check Surroundings — STOP When the vehicle has reached the end of its forward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle.
Page 282 280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Once the vehicle is in a standstill condition, the driver will be instructed to place the gear selector into the REVERSE position. Check Surroundings — Wait For Steering To Complete The system will then instruct the driver to check their surroundings and move backward.
Page 283 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 Parking Position message will be momentarily dis- played. Check Surroundings — Move Backward Your vehicle is now in the perpendicular park position. When the maneuver is complete, the driver will be Active ParkSense Complete — Check Parking Position instructed to check the vehicle’s parking position.
Page 284 282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) damage to vehicles or obstacles because the hitch • Drivers must be careful when performing parallel ball will be much closer to the obstacle than the or perpendicular parking maneuvers even when rear fascia when the loudspeaker sounds the con- using the ParkSense Active Park Assist system.
Page 285: Parkview Rear Back Up Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 screen. After five seconds this note will disappear. The CAUTION! (Continued) ParkView camera is located on the rear of the vehicle will not be detected when they are in close prox- above the rear License plate. imity.
Page 286 284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When enabled, active guide lines are overlaid on the When enabled, fixed guide lines are overlaid on the image to illustrate the width of the vehicle and its image to illustrate the width of the vehicle. projected backup path based on the steering wheel Different colored zones indicate the distance to the rear of position.
Page 287: Garage Door Opener - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 WARNING! CAUTION! (Continued) • To avoid vehicle damage, the vehicle must be Drivers must be careful when backing up even when driven slowly when using ParkView to be able to using the ParkView Rear Back Up Camera. Always stop in time when an obstacle is seen.
Page 288: Before You Begin Programming Homelink
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink buttons that are located in the headliner NOTE: HomeLink is disabled when the Vehicle Security or sun visor designate the three different HomeLink Alarm is active. channels. Before You Begin Programming HomeLink The HomeLink indicator is located above the center Ensure your vehicle is parked outside of the garage button.
Page 289: Programming A Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 NOTE: • Erasing all channels should only be performed when programming HomeLink for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at HomeLink.com for information or assistance.
Page 290 288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 Firmly push and release the “LEARN” or “TRAIN- cm) away from the HomeLink button you wish to ING” button. On some garage door openers/devices program while keeping the HomeLink indicator light there may be a light that blinks when the garage door in view.
Page 291: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 Reprogramming A Single HomeLink Button 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 (Rolling Code) cm) away from the HomeLink button you would like to program while keeping the HomeLink indicator To reprogram a channel that has been previously trained, light in view.
Page 292: Canadian/Gate Operator Programming
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To program the remaining two HomeLink buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 293 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 NOTE: cm) away from the HomeLink button you wish to • If the indicator light stays on constantly, program- program while keeping the HomeLink indicator light ming is complete and the garage door/device should in view.
Page 294: Using Homelink
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Push and hold the desired HomeLink button until the To do this, push and hold the two outside buttons for 20 indicator light begins to flash after 20 seconds. Do not seconds until the red indicator flashes. release the button.
Page 295: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 If you have any problems, or require assistance, please WARNING! (Continued) call toll-free 1-800-355-3515 or, on the Internet at after 1982. Do not use a garage door opener without HomeLink.com for information or assistance. these safety features.
Page 296: Power Sunroof With Power Shade - If Equipped
294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF WITH POWER SHADE — IF EQUIPPED The power sunroof switches are located to the left between the sun visors on the overhead console. Power Shade Switches WARNING! • Never leave children unattended in a vehicle, or with access to an unlocked vehicle.
Page 297: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 Opening Sunroof — Express WARNING! (Continued) A comfort stop position and full open position are the accessible to children. Do not leave the ignition of programmed automatic stops for the sunroof open posi- a vehicle equipped with Keyless Enter-N-Go in the tions.
Page 298: Opening Sunroof - Manual Mode
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Manual Mode position. The sunroof will close fully and stop automati- cally. This is called “Express Close.” During Express A comfort stop position is a programmed automatic stop Close operation, any other actuation of the switch will for the sunroof open position.
Page 299: Opening Power Shade - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 NOTE: If the sunshade is in the closed position when the the full-open position. Any release of the switch will stop vent switch is pushed, the sunshade will automatically the movement and the shade will remain in a partially cycle to the halfway open position prior to the sunroof opened condition until the switch is pushed again.
Page 300: Pinch Protect Feature
298 UNDERSTANDING THE FEATURES OF YOUR VEHICLE movement and the shade will remain in a partially closed open or partially open positions. This is a normal occur- condition until the switch is pushed again. rence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear Pinch Protect Feature windows together to minimize the buffeting.
Page 301: Power Outlets
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 299 NOTE: Ignition Off time is programmable through the NOTE: Uconnect System. Refer to “Uconnect Settings/Customer • All accessories connected to the “battery” powered Programmable Features” in “Understanding Your Instru- outlets should be removed or turned off when the ment Panel”...
Page 302 300 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Power Outlet Rear Power Outlet In addition to the front power outlet, there is also a power NOTE: The rear cargo power outlet can be changed to outlet located in the storage area of the center console. “battery”...
Page 303 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 301 Power Outlet Fuse Locations Rear Cargo Power Outlet Fuse Locations 1 — F75 Fuse 20A Yellow Front Power Outlet/Cigar Lighter Con- sole Bin 2 — F91 Fuse 20A Yellow Rear Power Outlet (powered when the ignition switch is in the ON or ACC position) 3 —...
Page 304 302 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! (Continued) discharge sufficiently to degrade battery life and/or To avoid serious injury or death: prevent the engine from starting. • Only devices designed for use in this type of outlet • Accessories that draw higher power (i.e., coolers, should be inserted into any 12 Volt outlet.
Page 305: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 303 POWER INVERTER — IF EQUIPPED 150 Watts. Certain high-end game consoles will exceed this power limit, as will most power tools. To turn on the power inverter outlet, simply plug in the device. The outlet automatically turns off when the device is unplugged.
Page 306: Wireless Charging Pad - If Equipped
304 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WIRELESS CHARGING PAD — IF EQUIPPED WARNING! To avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. •...
Page 307: Wireless Charging Pad Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 305 your Qi enabled mobile phone. Qi is a standard that uses Wireless Charging Pad Operation magnetic induction to transfer power to your mobile To use the wireless charging pad, the coil in your mobile device.
Page 308 306 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Adjust the wireless charging pad mobile phone cradle to hold the mobile phone in position. The cradle moves by pushing down on the finger tabs and adjusting the cradle in or out. Qi Logo Phone Alignment NOTE: The mobile phone must be aligned around the Qi logo for the LED to transition from red to flashing green.
Page 309: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 307 NOTE: The initial adjustment will only need to be done CAUTION! once as long as only one mobile phone is used. If a different mobile phone is used, the cradle will need to be Do not place your vehicle Key Fob on the wireless readjusted.
Page 310: Storage
308 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Cupholders Rear Cupholders There are two cupholders for the rear seat passengers, STORAGE located in the center armrest. Glove Compartment The glove compartment is located on the passengers side of the instrument panel. Pull outward on the latch to open the glove compartment.
Page 311: Console Storage Compartment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 309 There is also an additional storage bin located above the Console Storage Compartment instrument panel in the center of the dash. Some vehicles may be equipped with a wireless charging pad located in the upper portion of the center console. Refer to Wireless Charging Pad-If Equipped in this section for more information.
Page 312 310 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Console Center Console Storage The center console has a storage area which can hold cell WARNING! phones, PDAs, and other small items. Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
Page 313: Flip 'N Stow Front Passenger Seat Storage - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 311 Flip ’n Stow Front Passenger Seat Storage — If Equipped Some models may be equipped with storage under the front passenger seat cushion. Pull upward on the seat cushion loop to open the storage compartment. Passenger Seat Cushion Storage Compartment NOTE: Make sure that objects inside the bin do not interfere with the latch before closing the seat.
Page 314: Cargo Area Features
312 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Extension Panels WARNING! Cargo extension panels can be folded and unfolded. Be certain that the seat cushion is locked securely When the rear seats are moved to the more forward into position before using the seat. Otherwise, the positions and the rear seat backs are folded down, the seat will not provide the proper stability for passen- extension panels can be unfolded manually by hand (2 of...
Page 315 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 313 WARNING! WARNING! (Continued) handling. To avoid loss of control resulting in per- • Cargo tie-downs are not safe anchors for a child sonal injury, follow these guidelines for loading your seat tether strap. In a sudden stop or accident, a vehicle: tie-down could pull loose and allow the child seat •...
Page 316: Rear Storage Bins
314 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Storage Bins REAR WINDOW FEATURES The rear storage bins are located in the rear of the vehicle Rear Window Wiper/Washer on the sides of the load floor. The rear wiper/washer controls are located on the wind- shield wiper/washer lever on the right side of the steering column.
Page 317 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 315 wiper will turn on and operate for several wipe cycles after the end of the lever is released, and then resume the intermittent interval previously selected. If the lever is pushed while the wiper is in the off position, the wiper will operate for several wipe cycles, then turn off.
Page 318: Rear Window Defroster
316 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Window Defroster CAUTION! Failure to follow these cautions can cause damage to The rear window defroster button is located on the heating elements: the switch bank by the manual climate controls. • Use care when washing the inside of the rear Push this button to turn on the rear window defroster window.
Page 319 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 317 Crossbars should always be used whenever cargo is CAUTION! placed on the roof rack. Check the straps frequently to be • To avoid damage to the roof rack and vehicle, do sure that the load remains securely attached. not exceed the maximum roof rack load capacity.
Page 321: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..322 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) ..... . .363 INSTRUMENT CLUSTER —...
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Radio Operation ..... .427 Battery Saver On/Battery Saver Mode Message — Electrical Load Reduction Actions — ▫...
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 ▫ Automatic Temperature Control (ATC) ..450 ▫ Navigation (8.4A/8.4AN) ....466 ▫ Operating Tips ..... . .451 ▫...
Page 324: Instrument Panel Features
322 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Demister Outlet 5 — Instrument Cluster 9 — Passenger Air Bag 13 — Start/Stop Ignition Button 2 — Air Outlet 6 — Cruise Controls 10 — Glove Compartment 14 — Liftgate Release Button 3 —...
Page 325: Instrument Cluster - Base
UNDERSTANDING YOUR INSTRUMENT PANEL 323 INSTRUMENT CLUSTER — BASE Base EVIC Instrument Cluster...
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Tachometer 5. Temperature Gauge • Indicates the engine speed in revolutions per minute • The temperature gauge shows engine coolant tem- (RPM x 1000). perature. Any reading within the normal range indi- cates that the engine cooling system is operating 2.
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Your Vehicle”.
Page 328: Instrument Cluster - Premium
326 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM Premium DID Instrument Cluster...
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 1. Tachometer 5. Temperature Gauge • Indicates the engine speed in revolutions per minute • The temperature gauge shows engine coolant tem- (RPM x 1000). perature. Any reading within the normal range indi- cates that the engine cooling system is operating 2.
Page 330: Warning And Indicator Lights
328 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING AND INDICATOR LIGHTS WARNING! IMPORTANT: The warning / indicator lights switch on A hot engine cooling system is dangerous. You or in the instrument panel together with a dedicated mes- others could be badly burned by steam or boiling sage and/or acoustic signal when applicable.
Page 331: Red Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 329 Red Telltale Indicator Lights Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition is first placed in the ON/RUN, this light will turn on for four to eight seconds as a bulb check.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition is palaced in the ON/RUN position. If the light is either not on during startup, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reser- voir.
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL The light will remain on until the cause is corrected. Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- Operation of the Brake Warning Light can be checked by tions.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light — If Equipped This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Temperature Warning Light Red Warning What It Means Light Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold.
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 Oil Temperature Warning Light Red Telltale What It Means Light Oil Temperature Warning Light This telltale indicates engine oil temperature is high. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible.
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL Battery Charge Warning Light Red Telltale What It Means Light Battery Charge Warning Light This light illuminates when the battery is not charging properly. If it stays on while the en- gine is running, there may be a malfunction with the charging system. Contact your autho- rized dealer as soon as possible.
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL Electric Power Steering Fail Warning — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning — If Equipped This light is used to manage the electrical warning of the EPS (Power Steering System). Re- fer to “Power Steering”...
Page 341: Yellow Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 339 Liftgate Open Warning Light Red Telltale What It Means Light Liftgate Open Warning Light This indicator will turn on when the liftgate is open. NOTE: If the vehicle is moving, there will also be a single chime. Yellow Telltale Indicator Lights Rear Fog Light Indicator —...
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start.
Page 343 UNDERSTANDING YOUR INSTRUMENT PANEL 341 WARNING! CAUTION! A malfunctioning catalytic converter, as referenced Prolonged driving with the Malfunction Indicator above, can reach higher temperatures than in normal Light (MIL) on could cause damage to the engine operating conditions. This can cause a fire if you control system.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light — If Equipped The “ESC Indicator Light” in the instrument cluster will come on when the ignition is placed in the ON/RUN position, and when ESC is activated.
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light indicates the Electronic Stability Control (ESC) is off. Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means...
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL IMPORTANT: Do not continue driving with one or more Accordingly, when the low tire pressure telltale illumi- flat tires as handling may be compromised. Stop the nates, you should stop and check your tires as soon as vehicle, avoiding sharp braking and steering.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 illuminated. This sequence will continue upon subse- CAUTION! quent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the sys- The TPMS has been optimized for the original tem may not be able to detect or signal low tire pressure equipment tires and wheels.
Page 348 346 UNDERSTANDING YOUR INSTRUMENT PANEL Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the igni- tion is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 Electric Park Brake Fail Light Yellow Telltale What It Means Light Electric Park Brake Fail Warning Light This telltale will turn on to indicate the Electric Park Brake is not functioning properly and that service is required. Contact your authorized dealership. Low Fuel Indicator Light Yellow Telltale What It Means...
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL Loose Fuel Filler Cap Indicator Light — If Equipped Yellow Telltale What It Means Light Loose Fuel Filler Cap Indicator Light — If Equipped This light will illuminate when fuel filler cap is loose. Properly close the filler cap to disen- gage the light.
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 WARNING! CAUTION! If you continue operating the vehicle when the Continuous driving with Transmission Transmission Temperature Warning Light is illumi- Temperature Warning Light illuminated will eventu- nated you could cause the fluid to boil over, come in ally cause severe transmission damage or transmis- contact with hot engine or exhaust components and sion failure.
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL Forward Collision Indicator Light — If Equipped Yellow Telltale What It Means Light Forward Collision Indicator Light This telltale will turn on warn you of a possible collision with the vehicle in front of you.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 LaneSense Indicator Light — If Equipped Yellow Telltale What It Means Light LaneSense Indicator Light — If Equipped The LaneSense system provides the driver with visual and steering torque warnings when the vehicle starts to drift out of its lane unintentionally without the use of a turn signal. •...
Page 354 352 UNDERSTANDING YOUR INSTRUMENT PANEL Low Washer Fluid Indicator Light — If Equipped Yellow Telltale What It Means Light Low Washer Fluid Indicator Light — If Equipped This indicator will illuminate when the windshield washer fluid is low. Adaptive Cruise Control Fault Indicator Light — If Equipped Yellow Telltale What It Means Light...
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 LaneSense Failure Indicator Light — If Equipped Yellow Telltale What It Means Light LaneSense Failure Indicator Light This light will turn on when the LaneSense system is not operating and needs service. Please see your authorized dealer. Service 4WD Indicator Light —...
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL 4WD Low Indicator Light — If Equipped Yellow Telltale What It Means Light 4WD Low Indicator Light This light alerts the driver that the vehicle is in the four-wheel drive LOW mode. The front and rear driveshafts are mechanically locked together forcing the front and rear wheels to rotate at the same speed.
Page 357: Green Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 355 Rear Axle Lock Indicator Light — If Equipped Yellow Telltale What It Means Light Rear Axle Lock Indicator Light This light indicates when the rear axle lock has been activated. Green Telltale Indicator Lights Park/Headlight ON Indicator Light Green Telltale What It Means Light...
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL Front Fog Indicator Light — If Equipped Green Telltale What It Means Light Front Fog Indicator Light — If Equipped This indicator will illuminate when the front fog lights are on. Turn Signal Indicator Lights Green Telltale What It Means Light...
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 Stop/Start Active Indicator Light — If Equipped Green Telltale What It Means Light Stop/Start Active Indicator Light — If Equipped This telltale will illuminate when the Stop/Start function is in “Autostop” mode. LaneSense Indicator Light — If Equipped Green Telltale What It Means Light...
Page 360 358 UNDERSTANDING YOUR INSTRUMENT PANEL Cruise Control Engaged Indicator Light — If Equipped Green Telltale What It Means Light Cruise Control Engaged Indicator Light This light will turn on when the cruise control has been set to a certain speed.
Page 361: White Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 359 White Telltale Indicator Lights LaneSense Indicator Light — If Equipped White Telltale What It Means Light LaneSense Indicator Light — If Equipped When the LaneSense system is ON, the LaneSense indicator is solid white when only the left or right lane marking has been detected.
Page 362 360 UNDERSTANDING YOUR INSTRUMENT PANEL Cruise Control ON Indicator Light White Telltale What It Means Light Cruise Control ON Indicator Light This light will turn on when the electronic speed control is ON, but not set. Adaptive Cruise Control (ACC) Distance Setting Display Light — If Equipped White Telltale What It Means Light...
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 Hill Decent Control (HDC) Indicator Light — If Equipped White Telltale What It Means Light Hill Decent Control (HDC) Indicator Light This indicator shows when the Hill Descent Control (HDC) feature is turned on. The lamp will be on solid when HDC is armed.
Page 364: Blue Telltale Indicator Lights
362 UNDERSTANDING YOUR INSTRUMENT PANEL Blue Telltale Indicator Lights High Beam Indicator Light Blue Telltale What It Means Light High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switch the headlights back to low beam.
Page 365: Electronic Vehicle Information Center (Evic)
UNDERSTANDING YOUR INSTRUMENT PANEL 363 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC Menu items consist of the following: (EVIC) • Speedometer The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Info tures a driver-interactive display that is located in the • Driver Assist — If Equipped instrument cluster.
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL • UP Arrow Button The system allows the driver to select information by pushing the following buttons mounted on the steering Push and release the UP arrow button to scroll wheel: upward through main menu submenus.
Page 367: Oil Change Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 365 • OK Button turn off the message temporarily, push and release the OK button. To reset the oil change indicator system (after Push the OK button to access/select the information performing the scheduled maintenance), refer to the screens or submenu screens of a main menu item.
Page 368: Evic Selectable Menu Items
366 UNDERSTANDING YOUR INSTRUMENT PANEL Secondary Method Of Navigating To The Oil Life EVIC Selectable Menu Items Screen In The Display And Holding OK Push and release the UP or DOWN arrow button until the desired Selectable Menu icon is highlighted 1.
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 • Tire Pressure • Refer to “Tire Pressure Monitoring System (TPMS)” under “Starting and Operating” for further informa- Push and release the UP or DOWN arrow button tion. until “Tire Pressure” is highlighted in the EVIC. Push •...
Page 370 368 UNDERSTANDING YOUR INSTRUMENT PANEL Driver Assist Push and release the SET + or the SET- button (located on the steering wheel) and the following will display in the Adaptive Cruise Control (ACC) Menu EVIC: The EVIC displays the current ACC system settings. The ACC SET information displayed depends on ACC system status.
Page 371 UNDERSTANDING YOUR INSTRUMENT PANEL 369 • The EVIC will return to the last display selected after • Average Fuel Economy five seconds of no ACC display activity. • Current Fuel Economy (MPG or L/100 km) Refer to “Adaptive Cruise Control (ACC) — If Trip Info Equipped”...
Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL Stop/Start Menu Item – If Equipped Screen Setup Push and release the UP or DOWN arrow button Push and release the UP or DOWN arrow button until the Stop/Start menu item is highlighted in the until the Screen Setup Menu item is highlighted in the EVIC.
Page 373 UNDERSTANDING YOUR INSTRUMENT PANEL 371 • Average MPG or L/100 km Center • Current MPG or L/100 km • Menu Title (Default Setting) • None • Compass • Outside Temp Upper Right • Compass (default setting) • Time • Outside Temp •...
Page 374: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
372 UNDERSTANDING YOUR INSTRUMENT PANEL Restore To Defaults (Restores All Settings To Default Load reduction is only active when the engine is running. Settings, Outside Temp UL, Compass UR, Center Menu It will display a message if there is a risk of battery depletion to the point where the vehicle may stall due to Title) lack of electrical supply, or will not restart after the...
Page 375 UNDERSTANDING YOUR INSTRUMENT PANEL 373 • If the Battery Charge Warning Light is on it may • The charging system cannot deliver enough electrical indicate a problem with the charging system. Refer to power to the vehicle system because the electrical “Battery Charge Warning Light”...
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL • The battery was recently replaced and was not charged – Check HVAC settings (blower, temperature) completely. – Check the audio settings (volume) • The battery was discharged by an electrical load left on After a trip: when the vehicle was parked.
Page 377: Driver Information Display (Did)
UNDERSTANDING YOUR INSTRUMENT PANEL 375 • Speedometer DRIVER INFORMATION DISPLAY (DID) • Vehicle Info The Driver Information Display (DID) features a driver- interactive display that is located in the instrument • Driver Assist cluster. • Fuel Economy • Trip • Stop/Start Info — If Equipped •...
Page 378 376 UNDERSTANDING YOUR INSTRUMENT PANEL • DOWN Arrow Button Push and release the DOWN arrow button to scroll downward through the main menu and submenus. • RIGHT Arrow Button Push and release the RIGHT arrow button to access the information screens or submenu screens of a main menu item.
Page 379: Oil Change Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 377 and hold the OK arrow button for one second to reset Vehicles Equipped With Keyless Enter-N-Go displayed/selected features that can be reset. 1. Without pushing the brake pedal, push the ENGINE Oil Change Reset START/STOP button and cycle the ignition to the ON/RUN position (do not start the engine).
Page 380: Did Selectable Menu Items
378 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the indicator message illuminates when you DID. Push and release the RIGHT or LEFT start the vehicle, the oil change indicator system did not row button to cycle through the Vehicle Info sub- reset.
Page 381 UNDERSTANDING YOUR INSTRUMENT PANEL 379 • If the Tire Pressure system requires service, “Service 6. Battery Voltage Tire Pressure System” is displayed. Displays the actual battery voltage • Tire PSI is an information only function and cannot Driver Assist be reset. Push and release the LEFT arrow button to return to the main menu.
Page 382 380 UNDERSTANDING YOUR INSTRUMENT PANEL • System Off Adaptive Cruise Control Ready • ACC Proximity Warning When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise • ACC Unavailable Warning Control Ready.” •...
Page 383 UNDERSTANDING YOUR INSTRUMENT PANEL 381 • Average – The display shows the average fuel Fuel Economy economy (MPG or L/100 km) since the last reset. Push and release the UP or DOWN arrow button • Current – This display shows the current fuel economy until the Fuel Economy Menu item is displayed in the DID.
Page 384 382 UNDERSTANDING YOUR INSTRUMENT PANEL • Elapsed Time – Shows the total elapsed time of travel Screen Setup since the last reset. Push and release the UP or DOWN arrow button until the Screen Setup Menu displays in the DID. Push Hold the OK button to reset feature information.
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 • Average L/100km (or MPG) 2. Upper Right • Compass (default) • Current L/100km (or MPG) • Outside Temp • Trip A Distance • Time • Trip B Distance • Range to Empty • Audio Inform •...
Page 386: Battery Saver On/Battery Saver Mode Message
384 UNDERSTANDING YOUR INSTRUMENT PANEL Speed Warning — If Equipped In cases when the IBS detects charging system failure, or the vehicle battery conditions are deteriorating, electrical load reduction actions will take place to extend the Push and release the UP or DOWN driving time and distance of the vehicle.
Page 387 UNDERSTANDING YOUR INSTRUMENT PANEL 385 • 115V AC Power Inverter System NOTE: • The charging system is independent from load reduc- • Audio and Telematics System tion. The charging system performs a diagnostic on the Loss of the battery charge may indicate one or more of charging system continuously.
Page 388 386 UNDERSTANDING YOUR INSTRUMENT PANEL • Installing options like additional lights, upfitter elec- What to do when an electrical load reduction action trical accessories, audio systems, alarms and similar message is present (“Battery Saver On” or “Battery devices. Saver Mode”) •...
Page 389: Cybersecurity
UNDERSTANDING YOUR INSTRUMENT PANEL 387 • Evaluate the latest driving cycles (distance, driving evaluates and takes appropriate steps as needed. Similar time and parking time). to a computer or other devices, your vehicle may require software updates to improve the usability and perfor- •...
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL • To help further improve vehicle security and minimize WARNING! (Continued) the potential risk of a security breach, vehicle owners may result in an accident involving serious injury should: or death. • Routinely check www.driveuconnect.com/software- •...
Page 391: Uconnect Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 389 UCONNECT SETTINGS The Uconnect system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allow you to access and change the customer programmable features. NOTE: Features can vary by vehicle.
Page 392: Buttons On The Faceplate
390 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Faceplate Buttons on the faceplate are located below the Uconnect system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side of the Climate Controls in the center of the instru- ment panel.
Page 393: Buttons On The Touchscreen
UNDERSTANDING YOUR INSTRUMENT PANEL 391 Buttons On The Touchscreen When making a selection, press the button on the touch- screen to enter the desired mode. Once in the desired Buttons on the touchscreen are accessible on the mode, press and release the preferred setting and make Uconnect display.
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: When Day or Night is selected for the Display with the “+” and “–” setting buttons on the touchscreen Mode, the usage of the Parade Mode feature will cause or by selecting any point on the scale between the “+” the radio to activate the Display Brightness Day control and “–”...
Page 395 UNDERSTANDING YOUR INSTRUMENT PANEL 393 in the Driver Information Display (DID), and navigation pressed. Press the “Touchscreen Beep” button on the system (if equipped). The following selectable units of touchscreen then select from “On” or “Off.” measure are listed below: •...
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Clock & Date After pressing the “Voice” button on the touchscreen the After pressing the “Clock & Date” button on the touch- following settings will be available: screen the following settings will be available: •...
Page 397 UNDERSTANDING YOUR INSTRUMENT PANEL 395 • Forward Collision Warning (FCW) Active Braking — Safety & Driving Assistance If Equipped After pressing the “Safety & Driving Assistance” button on the touchscreen the following settings will be avail- The FCW system includes Advanced Brake Assist (ABA). able: When this feature is selected, it will apply the brakes to slow your vehicle in case of potential forward collision.
Page 398 396 UNDERSTANDING YOUR INSTRUMENT PANEL • ParkSense — If Equipped lane departures. The LDW sensitivity can be set to provide either an “early,” “medium,” or “late” warning The Rear Park Assist system will scan for objects behind zone start point. the vehicle when the gear selector is in REVERSE and the For further information, refer to “LaneSense Warning vehicle speed is less than 11 mph (18 km/h).
Page 399 UNDERSTANDING YOUR INSTRUMENT PANEL 397 • Rear ParkSense Volume — If Equipped position. The mirrors will move back to their previous position when the transmission is shifted out of RE- Rear Park Assist chime volume settings can be selected VERSE. To make your selection, press the “Tilt Mirrors In from the EVIC/DID or Uconnect System (if equipped).
Page 400 398 UNDERSTANDING YOUR INSTRUMENT PANEL • ParkView Backup Camera Fixed Guide Lines — If NOTE: If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is Equipped not damaged, the sensor may have become misaligned. When this feature is enabled, fixed (static) grid lines are Take your vehicle to an authorized dealer to verify sensor overlaid on the Rear Backup Camera image to illustrate...
Page 401 UNDERSTANDING YOUR INSTRUMENT PANEL 399 • Electric Park Brake Service Mode setting, press the “Headlight Off Delay” button on the touchscreen, and choose either 0 sec, 30 sec, 60 sec or 90 This feature provides a means for a technician or vehicle seconds.
Page 402 400 UNDERSTANDING YOUR INSTRUMENT PANEL • Auto High Beams — If Equipped Fob or the Passive Entry Feature. To make your selection, press the “Flash Lights w/Lock” button on the touch- When this feature is selected, the high beam headlights screen and select from “On”...
Page 403 UNDERSTANDING YOUR INSTRUMENT PANEL 401 • Horn w/Remote Start — If Equipped opened. To make your selection, press the “Auto Unlock On Exit” button on the touchscreen and select from “On” When this feature is selected, the horn will sound when or “Off.”...
Page 404 402 UNDERSTANDING YOUR INSTRUMENT PANEL • Passive Entry NOTE: The seat will return to the memorized seat location if “Memory Linked to Fob” is set to (ON) when This feature allows you to lock and unlock the vehicle’s the Remote Keyless Entry (RKE) Key Fob is used to door(s) without having to press the Remote Keyless unlock the door.
Page 405 UNDERSTANDING YOUR INSTRUMENT PANEL 403 • Auto-On Driver Heated/Ventilated Seat & Steering • Engine Off Power Delay Wheel With Vehicle Start — If Equipped When this feature is selected, the power window When this feature is selected the driver’s heated seat and switches, radio, Uconnect phone system (if equipped), heated steering wheel will automatically turn ON when DVD video system (if equipped), power sunroof (if...
Page 406 404 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Settings — If Equipped After pressing the “Compass Settings” button on the touchscreen the following settings will be available: NOTE: Before compass calibration is performed, the compass variance zone should be set for best results. •...
Page 407 UNDERSTANDING YOUR INSTRUMENT PANEL 405 • Balance/Fade metallic objects). A message will appear on the touch- screen when the compass has been successfully cali- This feature allows you to adjust the Balance and Fade brated. settings. Press and drag the speaker icon or use the NOTE: Keep magnetic materials away from the top of the arrows to adjust, tap the “C”...
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL • AUX Volume Offset — If Equipped • Paired Audio Sources This feature provides the ability to tune the audio level This feature shows which audio devices are paired to the for portable devices connected through the AUX input. Phone/Bluetooth system.
Page 409 UNDERSTANDING YOUR INSTRUMENT PANEL 407 • Subscription Information Restore Settings After pressing the “Restore Settings” button on the New vehicle purchasers or lessees will receive a free touchscreen the following settings will be available: limited time subscription to SiriusXM Satellite Radio with your radio.
Page 410: Customer Programmable Features/Personal Settings - Uconnect 8.4 Personal Settings
408 UNDERSTANDING YOUR INSTRUMENT PANEL • Clear Personal Data Phone/Bluetooth, SiriusXM Setup, Restore Settings, Clear Personal Data, and System Information. When this feature is selected it will remove personal data including Bluetooth devices and presets. To remove NOTE: Only one category may be selected at a time. personal information, press the “Clear Personal Data”...
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 • Display Mode NOTE: To make changes to the Display Brightness with Headlights ON setting, the headlights must be on and When in this display you may select one of the auto the interior dimmer switch must not be in the party or display settings.
Page 412 410 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Theme Press the “Touchscreen Beep” button on the touchscreen until a check-mark appears next to the setting, showing This feature will allow you to choose a background that setting has been selected. theme for the display screen. The theme will change the •...
Page 413 UNDERSTANDING YOUR INSTRUMENT PANEL 411 Voice Clock After pressing the “Voice” button on the touchscreen the After pressing the “Clock” button on the touchscreen the following settings will be available: following settings will be available: • Voice Response Length • Sync Time With GPS When in this display, you may change the Voice Re- This feature will allow the radio to sync time with a GPS sponse Length settings.
Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Time Minutes on the touchscreen until a check-mark appears next to setting, indicating that the setting has been selected. This feature will allow you to adjust the minutes. The “Sync time with GPS” button on the touchscreen must be Safety &...
Page 415 UNDERSTANDING YOUR INSTRUMENT PANEL 413 • LaneSense Warning — If Equipped For further information, refer to “Adaptive Cruise Con- trol (ACC)” in “Understanding The Features Of Your When this feature is selected, it sets the distance at which Vehicle”. the steering wheel will provide feedback for potential •...
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL • ParkSense — If Equipped • Rear ParkSense Volume — If Equipped The Rear Park Assist system will scan for objects behind Rear Park Assist chime volume settings can be selected the vehicle when the gear selector is in REVERSE and the from the EVIC/DID or Uconnect System (if equipped).
Page 417 UNDERSTANDING YOUR INSTRUMENT PANEL 415 position when the transmission is shifted out of RE- NOTE: If your vehicle has experienced any damage in VERSE. To make your selection, press the “Tilt Mirrors In the area where the sensor is located, even if the fascia is Reverse”...
Page 418 416 UNDERSTANDING YOUR INSTRUMENT PANEL • ParkView Backup Camera Fixed Guide Lines — If • Electric Park Brake Service Mode Equipped This feature provides a means for a technician or vehicle When this feature is enabled, fixed (static) grid lines are owner to utilize a vehicle integrated, menu driven sys- overlaid on the Rear Backup Camera image to illustrate tem, to command the electric park brake retraction, to...
Page 419 UNDERSTANDING YOUR INSTRUMENT PANEL 417 press the “+” or “–” button on the touchscreen to select on the touchscreen, until a check-mark appears next to your desired time interval, and choose either 0 sec, 30 sec, setting, showing that setting has been selected. 60 sec or 90 seconds.
Page 420 418 UNDERSTANDING YOUR INSTRUMENT PANEL • Flash Lights With Lock Locks” button on the touchscreen, until a check-mark appears next to setting, showing that setting has been When this feature is selected, the exterior lights will flash selected. when the doors are locked or unlocked with the RKE Key •...
Page 421 UNDERSTANDING YOUR INSTRUMENT PANEL 419 on the touchscreen, until a check-mark appears next to press of the RKE Key Fob UNLOCK button. You must setting, indicating that the setting has been selected. press the RKE Key Fob UNLOCK button twice to unlock the passenger’s doors.
Page 422 420 UNDERSTANDING YOUR INSTRUMENT PANEL • Passive Entry NOTE: The seat will return to the memorized seat location (if Recall Memory with Remote Key Unlock is set This feature allows you to lock and unlock the vehicles to ON) when the RKE Key Fob is used to unlock the door. door(s) without having to press the RKE Key Fob lock or Refer to “Driver Memory Seat”...
Page 423 UNDERSTANDING YOUR INSTRUMENT PANEL 421 • Auto-On Driver Heated/Ventilated Seat & Steering vehicle. To make your selection, press the “Easy Exit Wheel With Vehicle Start — If Equipped Seat” button on the touchscreen until a check-mark appears next to setting, showing that setting has been When this feature is selected the driver’s heated seat will selected.
Page 424 422 UNDERSTANDING YOUR INSTRUMENT PANEL Delay status press the “+” or “-” button on the touch- NOTE: Bass/Mid/Treble allow you to simply slide your screen to select your desired time interval. finger up or down to change the setting as well as press directly on the desired setting.
Page 425 UNDERSTANDING YOUR INSTRUMENT PANEL 423 • Loudness — If Equipped SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup” button on the touch- Loudness improves sound quality at lower volumes. To screen, the following settings will be available: make your selection, press the “Loudness” button on the touchscreen, then choose “Yes”...
Page 426 424 UNDERSTANDING YOUR INSTRUMENT PANEL exclude undesirable channels while scanning. To make NOTE: SiriusXM Travel Link is a separate subscription your selection, press the “Channel Skip” button on the and is available for U.S. residents only. touchscreen, select the channels you would like to skip Restore Settings followed by pressing the back arrow button on the After pressing the “Restore Settings”...
Page 427: Uconnect Radios - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 425 • System Information Clear Personal Data After pressing the “Clear Personal Data” button on the When System Information is selected, a System Informa- touchscreen the following settings will be available: tion screen will appear displaying the system software version.
Page 428: Media Hub - If Equipped
426 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA HUB — IF EQUIPPED Located in the front storage area, this feature allows an External USB device, SD card or AUX electronic device to be plugged into the port, slot or jack. For further information, refer to the Uconnect User’s Manual.
Page 429: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 427 Pushing the center button will make the radio switch between the various modes available (AM/FM/SXM/ CD/AUX, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in.
Page 430: Cd Player
428 UNDERSTANDING YOUR INSTRUMENT PANEL CD Player CD/DVD DISC MAINTENANCE Pushing the top of the switch once will go to the next To keep a CD/DVD in good condition, take the following track on the CD. Pushing the bottom of the switch once precautions: will go to the beginning of the current track, or to the 1.
Page 431: Radio Operation And Mobile Devices
UNDERSTANDING YOUR INSTRUMENT PANEL 429 NOTE: If you experience difficulty in playing a particular Regulatory And Safety Information disc, it may be damaged (e.g., scratched, reflective coat- USA/CANADA ing removed, a hair, moisture or dew on the disc) Exposure to Radio Frequency Radiation oversized, or have protection encoding.
Page 432 430 UNDERSTANDING YOUR INSTRUMENT PANEL situations or environments, such as aboard airplanes. If and, if not installed and used in accordance with the you are unsure of restrictions, you are encouraged to ask instructions, may cause harmful interference to radio for authorization before turning on the wireless radio.
Page 433: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 431 CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather. This system can be operated through either the controls on the instrument panel or through the Uconnect system dis- play.
Page 434 432 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Air Conditioning Operation Push the A/C button to engage the Air Conditioning There are several blower speeds. Use (A/C). An LED will illuminate when the A/C system is this control to regulate the amount of operating.
Page 435 UNDERSTANDING YOUR INSTRUMENT PANEL 433 Mode Control (Air Direction) Bi-Level Mode Mode control allows you to choose Air is directed through the panel and floor outlets. from several patterns of air distribu- NOTE: There is a difference in temperature (in tion.
Page 436 434 UNDERSTANDING YOUR INSTRUMENT PANEL Mix Mode Recirculation Control Push this button to choose between outside air intake or Air is directed through the floor, defrost and side recirculation of the air inside the vehicle. A LED will window demist outlets. This setting works best in illuminate when you are in Recirculation mode.
Page 437 UNDERSTANDING YOUR INSTRUMENT PANEL 435 • In cold or damp weather, the use of the Recirculation Economy Mode mode will cause windows to fog on the inside because If ECONOMY mode is desired, push the A/C button to of moisture buildup inside the vehicle. For maximum turn off the LED indicator and the A/C compressor.
Page 438: Equipped
436 UNDERSTANDING YOUR INSTRUMENT PANEL The windshield wiper de-icer operates automatically Manual Climate Controls With Touchscreen — If once the following conditions are met: Equipped • Activation By Front Defrost Buttons On Your Uconnect Faceplate The wiper de-icer activates automatically during a cold The buttons on the faceplate are located below the weather manual start with full defrost, and when the Uconnect screen.
Page 439 UNDERSTANDING YOUR INSTRUMENT PANEL 437 Buttons On Your Uconnect Touchscreen The buttons on the touchscreen are accessible on the Uconnect system screen. Uconnect 8.4 Manual Temperature Controls — Buttons On The Touchscreen Button Descriptions (Applies To Both The Buttons On Your Faceplate And The Buttons On Your Touchscreen) Uconnect 5.0 Manual Temperature Controls —...
Page 440 438 UNDERSTANDING YOUR INSTRUMENT PANEL this function again will cause the MAX A/C operation to window demist outlets. When the defrost button is switch into manual mode and the MAX A/C indicator selected, the blower level will increase. Use Defrost mode will turn off.
Page 441 UNDERSTANDING YOUR INSTRUMENT PANEL 439 to switch to manual operation. The speeds can be selected CAUTION! using either the blower control knob on the faceplate or buttons on the touchscreen as follows: Failure to follow these cautions can cause damage to the heating elements: Blower Control Knob On The Faceplate •...
Page 442 440 UNDERSTANDING YOUR INSTRUMENT PANEL • Panel Mode • Floor Mode Air comes from the outlets in the instrument Air comes from the floor outlets. A slight amount panel. Each of these outlets can be individually of air is directed through the defrost and side adjusted to direct the flow of air.
Page 443: Windshield Wiper De-Icer - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 441 9. Temperature Control Down Button (Uconnect 8.4) area, indicates warmer temperatures. Moving the tem- perature bar into the blue area indicates cooler tempera- Provides temperature control. Push the button on the tures. faceplate for cooler temperature settings or on the touch- screen, press and slide the button on the touchscreen Windshield Wiper De-icer —...
Page 444: Dual Zone Automatic Climate Controls With
442 UNDERSTANDING YOUR INSTRUMENT PANEL • Activation By Remote Start Operation When the Remote Start is activated and the outside ambient temperature is less than 33° F (0.6° C) the windshield wiper de-icer is activated. Upon exiting Re- mote Start, the climate control functions will resume their previous operation except, if the de-icer is active, the de-icer timer and operation will continue.
Page 445 UNDERSTANDING YOUR INSTRUMENT PANEL 443 Buttons On Your Uconnect Touchscreen The buttons on your faceplate are also accessible on the Uconnect system touchscreen. Uconnect 8.4 Automatic Temperature Controls — Buttons On The Touchscreen Button Descriptions (Applies To Both The Buttons On Your Faceplate And The Buttons On Your Touchscreen) Uconnect 5.0 Automatic Temperature Controls —...
Page 446 444 UNDERSTANDING YOUR INSTRUMENT PANEL this function again will cause the MAX A/C operation to 5. Front Defrost Button switch into manual mode and the MAX A/C indicator Press and release to change the current airflow setting to will turn off. Defrost mode.
Page 447 UNDERSTANDING YOUR INSTRUMENT PANEL 445 this button, five additional minutes will be added to the 7. Passenger Temperature Control Up Button (Uconnect timer function. 8.4 Only) Provides the passenger with independent temperature CAUTION! control. Push the button on the faceplate for warmer temperature settings or on the touchscreen, press and Failure to follow these cautions can cause damage to slide the button on the touchscreen temperature bar...
Page 448 446 UNDERSTANDING YOUR INSTRUMENT PANEL slide the button on the touchscreen temperature bar speeds can be selected using either the blower control towards the blue arrow button on the touchscreen for knob on the faceplate or buttons on the touchscreen as cooler temperature settings.
Page 449 UNDERSTANDING YOUR INSTRUMENT PANEL 447 • Panel Mode • Floor Mode Air comes from the outlets in the instrument Air comes from the floor outlets. A slight amount panel. Each of these outlets can be individually of air is directed through the defrost and side adjusted to direct the flow of air.
Page 450: Climate Control Functions
448 UNDERSTANDING YOUR INSTRUMENT PANEL button on the touchscreen temperature bar towards the 15. Temperature Control (Uconnect 5.0 Only) blue arrow button on the touchscreen for cooler tempera- Press the temperature button on the touchscreen to ture settings. regulate the temperature of the air inside the passenger NOTE: In Sync mode, this button will also automatically compartment.
Page 451 UNDERSTANDING YOUR INSTRUMENT PANEL 449 NOTE: In MAX A/C, the blower level and mode position can be adjusted to desired user settings. Pushing other settings • If fog or mist appears on the windshield or side glass, will cause the MAX A/C operation to switch to the select Defrost mode and adjust blower speed if selected setting and cause MAX A/C to exit.
Page 452: Automatic Temperature Control (Atc)
450 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In cold weather, use of Recirculation mode may 2. Adjust the temperature you would like the system to lead to excessive window fogging. The recirculation maintain by adjusting the driver and passenger tem- feature may be unavailable (button on the touchscreen perature buttons on the faceplate or buttons on the greyed out) if conditions exist that could create fogging touchscreen.
Page 453: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 451 • The temperature can be displayed in U.S. or Metric The operator can also select the direction of the airflow units selecting Uconnect customer- by selecting one of the available mode settings. A/C programmable feature. Refer to the “Uconnect System operation and Recirculation control can also be manually Settings”...
Page 454 452 UNDERSTANDING YOUR INSTRUMENT PANEL coolant that meets the requirements of FCA Material Window Fogging Standard MS.90032 and 50% water is recommended. Interior fogging on the windshield can be quickly re- Refer to “Maintenance Procedures” in “Maintaining Your moved by turning the mode selector to Defrost. The Vehicle”...
Page 455 UNDERSTANDING YOUR INSTRUMENT PANEL 453 Windshield Wiper De-icer — If Equipped windshield wiper de-icer is activated. Upon exiting Re- mote Start, the climate control functions will resume their The windshield wiper de-icer is a heating element lo- previous operation except, if the de-icer is active, the cated at the base of the windshield.
Page 456 454 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions For Various Weather Conditions...
Page 457: Personalized Menu Bar
UNDERSTANDING YOUR INSTRUMENT PANEL 455 PERSONALIZED MENU BAR 1. Press the “Apps ” button to open the App screen. The Uconnect features and services in the main menu bar 2. Press and hold, then drag the selected App to replace are easily changed for your convenience.
Page 458 456 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 5.0 Uconnect 8.4AN If you see the icon on your touchscreen, you have the Uconnect 8.4AN system. If not, you have a Uconnect 8.4A system.
Page 459: Get Started
UNDERSTANDING YOUR INSTRUMENT PANEL 457 Get Started 4. Each time you give a Voice Command, you must first push either the VR or Phone button, wait until after All you need to control your Uconnect system with your the beep, then say your Voice Command. voice are the buttons on your steering wheel.
Page 460: Basic Voice Commands
458 UNDERSTANDING YOUR INSTRUMENT PANEL Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say • Cancel to stop a current voice session •...
Page 461: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 459 Uconnect 5.0 Uconnect 8.4A/8.4AN Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear. (Subscrip- tion or included SiriusXM Satellite Radio trial required.) Push the VR button .
Page 462 460 UNDERSTANDING YOUR INSTRUMENT PANEL • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button and say “Help.”...
Page 463: Media
UNDERSTANDING YOUR INSTRUMENT PANEL 461 Push the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist. • Change source to Bluetooth • Change source to AUX •...
Page 464: Phone
462 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 5.0 Media Uconnect 8.4A/8.4AN Media Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illumi- nated on your touchscreen, your system is ready. Check UconnectPhone.com for mobile phone compatibility and pairing instructions.
Page 465 UNDERSTANDING YOUR INSTRUMENT PANEL 463 Push the Phone button . After the beep, say one of the following commands • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) TIP: When providing a Voice Command, push the Phone button and say “Call,”...
Page 466: Voice Text Reply
464 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Once an incoming text message is read to you, push the Phone button . After the beep, say: “Reply.” 2. Listen to the Uconnect prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts.
Page 467 UNDERSTANDING YOUR INSTRUMENT PANEL 465 TIP: Your mobile phone must have the full implementa- tion of the Message Access Profile (MAP) to take advan- tage of this feature. For details about MAP, visit UconnectPhone.com. Apple iPhone iOS 6 or later supports reading incoming text messages only.
Page 468: Climate (8.4A/8.4An)
466 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Voice Text Reply is not compatible with iPhone, but if your vehicle is equipped with Siri Eyes Free, you can use your voice to send a text message. Climate (8.4A/8.4AN) Too hot? Too cold? Adjust vehicle temperatures hands- free and keep everyone comfortable while you keep moving ahead.
Page 469 UNDERSTANDING YOUR INSTRUMENT PANEL 467 1. To enter a destination, push the VR button . After the beep, say: • For the 8.4A Uconnect System, say: “Enter state.” • For the 8.4AN Uconnect System, say: “Find address 800 Chrysler Drive Auburn Hills, Michigan.” 2.
Page 470: Uconnect Access (8.4A/8.4An)
468 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect Access (8.4A/8.4AN) NOTE: Uconnect Access is available only on equipped vehicles purchased within the continental United States, Alaska and Hawaii. Services can only be used where WARNING! coverage is available; see coverage map for details. ALWAYS obey traffic laws and pay attention to the 9-1-1 Call road.
Page 471: Vehicle Health Alert
UNDERSTANDING YOUR INSTRUMENT PANEL 469 Roadside Assistance Call WiFi Hotspot*** **If vehicle is equipped. ***Extra charges apply. Vehicle Health Alert Your vehicle will send you an email alert if it senses a problem under the hood with one of your vehicles key systems.
Page 472: Mobile App (8.4A/8.4An)
470 UNDERSTANDING YOUR INSTRUMENT PANEL Signing up is easy! Simply follow the steps above. Or, press the “Apps ” button on the touchscreen to “Register By Web” to complete the process using your smartphone or computer. For further information, please visit DriveUconnect.com. Mobile App (8.4A/8.4AN) You’re only a few steps away from using remote com- mands and playing your favorite music in your vehicle.
Page 473: Voice Texting (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 471 3. Press the app you’d like to connect to your vehicle. Voice Texting (8.4A/8.4AN) 4. Enter your login information for the selected app and 1. To send a message, push the Phone button . After press Link.
Page 474 472 UNDERSTANDING YOUR INSTRUMENT PANEL You must be registered with Uconnect Access and have a compatible MAP – enabled smartphone to use your voice to send a personalized text message. For details about MAP, visit UconnectPhone.com. Apple iPhone iOS6 or later supports reading incoming text messages only.
Page 475: Yelp (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 473 TIP: 3. Once the YELP home screen appears on the touch- screen, push the VR button , then say: “YELP • Voice Texting is not compatible with iPhone, but if search.” your vehicle is equipped with Siri Eyes Free, you can use your voice to send a text message.
Page 476: Siriusxm Travel Link (8.4A/8.4An)
474 UNDERSTANDING YOUR INSTRUMENT PANEL Push the VR button . After the beep, say one of the following commands: • Show fuel prices • Show 5 - day weather forecast • Show extended weather TIP: Traffic alerts are not accessible with Voice Com- mand.
Page 477: Siri Eyes Free - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 475 Do Not Disturb With Do Not Disturb, you can disable notifications from incoming calls and texts, allowing you to keep your eyes on the road and hands on the wheel. For your conve- nience, there is a counter display to keep track of your missed calls and text messages while you were using Do Not Disturb.
Page 478: General Information
476 UNDERSTANDING YOUR INSTRUMENT PANEL While in Do Not Disturb, Conference Call can be selected NOTE: so you can still place a second call without being inter- • The transmitter has been tested and it complies with rupted by incoming calls. FCC and IC rules.
Page 479: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 477 Additional Information For Uconnect system support, call: 1-877-855-8400 (24 hours a day 7 days a week) or visit DriveUconnect.com. © 2016 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Uconnect Access services support, call: 1-855-792-4241 Connect is a trademark of FCA US LLC.
Page 481 STARTING AND OPERATING CONTENTS ▫ Possible Reasons The Engine Does Not STARTING PROCEDURES ....484 Autostop ......488 ▫...
Page 482 480 STARTING AND OPERATING ▫ Nine-Speed Automatic Transmission ..495 OFF-ROAD DRIVING TIPS ....516 ▫ Gear Ranges ......497 ▫...
Page 483 STARTING AND OPERATING 481 ▫ Dynamic Steering Torque (DST) ...543 ELECTRONIC BRAKE CONTROL SYSTEM ..530 ▫ Electronic Brake Force Distribution (EBD) ..530 ▫ Hill Descent Control (HDC) — If Equipped . . .544 ▫...
Page 484 482 STARTING AND OPERATING ▫ Tire Types ......566 ▫ Reformulated Gasoline ....587 ▫...
Page 485 STARTING AND OPERATING 483 ▫ Starting ......593 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) .
Page 486: Starting Procedures
484 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Do not leave the key fob in or near the vehicle, or inside and outside mirrors, and fasten your seat belts. in a location accessible to children, and do not leave the ignition of a vehicle equipped with WARNING! Keyless Enter-N-Go in the ACC or ON/RUN mode.
Page 487: Extreme Cold Weather (Below -22°F Or −30°C)
STARTING AND OPERATING 485 Cycle the ignition switch to the START position and Extended Park Starting release when the engine starts. If the engine fails to start NOTE: Extended Park condition occurs when the vehicle within 10 seconds, cycle the ignition switch to the has not been started or driven for at least 30 days.
Page 488: If Engine Fails To Start
486 STARTING AND OPERATING CAUTION! WARNING! (Continued) engine has started, ignite and damage the converter To prevent damage to the starter, do not crank con- and vehicle. tinuously for more than 10 seconds at a time. Wait 10 • If the vehicle has a discharged battery, booster to 15 seconds before trying again.
Page 489: After Starting
STARTING AND OPERATING 487 2. Cycle the ignition to the START position and release it STOP/START SYSTEM — IF EQUIPPED as soon as the starter engages. The starter motor will The Stop/Start function was developed to reduce fuel disengage automatically in 10 seconds. consumption.
Page 490: Possible Reasons The Engine Does Not Autostop
488 STARTING AND OPERATING Driver Information Display (DID) within the Stop/ Start system may be viewed in the EVIC/DID Stop/Start Start section. Refer to “Electronic Vehicle Information Screen. In the following situations the engine will not Center (EVIC)” or “Driver Information Display (DID)” stop: in “Understanding Your Instrument Panel”...
Page 491: To Start The Engine While In Autostop Mode
STARTING AND OPERATING 489 • The transmission is not in a forward or reverse gear. It may be possible for the vehicle to be driven several times without the STOP/START system going into a • Hood is open. STOP/START READY state under more extreme condi- •...
Page 492: To Manually Turn Off The Stop/Start System
490 STARTING AND OPERATING • HVAC system temperature or fan speed is manually • A STOP/START system error occurs. adjusted. If the Electric Park Brake is applied with the engine off, • Battery voltage drops too low. the engine may require a manual restart and the electric park brake may require a manual release (depress brake •...
Page 493: To Manually Turn On The Stop/Start System
STARTING AND OPERATING 491 3. At the next vehicle stop (after turning off the STOP/ START system), the engine will not be stopped. 4. The STOP/START system will reset itself back to an ON condition every time the ignition is turned off and back on.
Page 494: Engine Block Heater - If Equipped
492 STARTING AND OPERATING If the “SERVICE STOP/START SYSTEM” message ap- 2. Undo the Velcro strap that secures the heater cord in pears in the EVIC/DID, have the system checked by your place. authorized dealer. 3. Pull the cord to the front of the vehicle and plug it into a grounded, three-wire extension cord.
Page 495: Automatic Transmission
STARTING AND OPERATING 493 WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure Remember to disconnect the engine block heater those in or near the vehicle. As with all vehicles, cord before driving. Damage to the 110-115 Volt you should never exit a vehicle while the engine is electrical cord could cause electrocution.
Page 496 494 STARTING AND OPERATING WARNING! (Continued) CAUTION! number of reasons. A child or others could be Damage to the transmission may occur if the follow- seriously or fatally injured. Children should be ing precautions are not observed: warned not to touch the parking brake, brake pedal •...
Page 497: Key Ignition Park Interlock
STARTING AND OPERATING 495 Key Ignition Park Interlock The brake pedal must also be pressed to shift from NEUTRAL into DRIVE or REVERSE when the vehicle is This vehicle is equipped with a Key Ignition Park Inter- stopped or moving at low speeds. lock which requires the transmission to be in PARK before the ignition switch can be turned to the LOCK/ Nine-Speed Automatic Transmission...
Page 498 496 STARTING AND OPERATING vehicle may be somewhat abrupt. This is a normal Operation in this section for further information). Mov- condition, and precision shifts will develop within a few ing the gear selector into the ERS (-/+) position (beside hundred miles (kilometers).
Page 499: Gear Ranges
STARTING AND OPERATING 497 NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. PARK (P) This range supplements the parking brake by locking the transmission.
Page 500 498 STARTING AND OPERATING downhill grade and away from the curb on an uphill WARNING! (Continued) grade. vehicle could accelerate quickly forward or in re- verse. You could lose control of the vehicle and hit WARNING! someone or something. Only shift into gear when •...
Page 501 STARTING AND OPERATING 499 WARNING! (Continued) WARNING! (Continued) • When leaving the vehicle, always make sure the Keyless Enter-N-Go in the ACC or ON/RUN posi- ignition is in the OFF position, remove the key fob tion. A child could operate power windows, other from the vehicle and lock the vehicle.
Page 502 500 STARTING AND OPERATING The following indicators should be used to ensure that NEUTRAL (N) you have engaged the transmission into the PARK posi- Use this range when the vehicle is standing for prolonged tion: periods with the engine running. The engine may be •...
Page 503 STARTING AND OPERATING 501 (ERS) Operation in this section for further information) CAUTION! (Continued) to select a lower gear range. Under these conditions, severe transmission damage. Refer to “Recreational using a lower gear range will improve performance and Towing” in “Starting And Operating” and “Towing A extend transmission life by reducing excessive shifting Disabled Vehicle”...
Page 504 502 STARTING AND OPERATING temperature as well as vehicle speed. This feature im- Transmission Limp Home Mode proves warm up time of the engine and transmission to Transmission function is monitored electronically for achieve maximum efficiency. Engagement of the torque abnormal conditions.
Page 505 STARTING AND OPERATING 503 4. Wait approximately 10 seconds. You can switch between DRIVE and ERS mode at any vehicle speed. When the gear selector is in the DRIVE 5. Restart the engine. position, the transmission will operate automatically, 6. Shift into the desired gear range. If the problem is no shifting between all available gears.
Page 506: Four-Wheel Drive Operation
504 STARTING AND OPERATING the upper gears. When the vehicle speed drops or during WARNING! some accelerations, the clutch automatically disengages. Do not downshift for additional engine braking on a NOTE: The torque converter clutch will not engage until slippery surface. The drive wheels could lose their the transmission fluid is warm (usually after 1 to 3 miles grip and the vehicle could skid, causing a collision or [2 to 5 km] of driving).
Page 507 STARTING AND OPERATING 505 automatically to the rear wheels. The greater the front Additionally, on dry pavement under heavy throttle wheel traction loss, the greater the power transfer to the input (where one may have no wheel spin), torque will be rear wheels.
Page 508: 2-Speed Four-Wheel Drive (4X4) - If Equipped
506 STARTING AND OPERATING 2-Speed Four-Wheel Drive (4X4) — If Equipped 2-Speed 4x4 Switch (with Rear Lock) The Four-Wheel Drive is fully automatic in the normal driving mode. The Selec-Terrain buttons provide three 2-Speed 4x4 Switch selectable mode positions: • 4WD LOW •...
Page 509: Shift Positions
STARTING AND OPERATING 507 • NEUTRAL Because four-wheel drive provides improved traction, there is a tendency to exceed safe turning and stopping When additional traction is required, the 4WD LOW speeds. Do not go faster than road conditions permit. range position can be used to provide an additional gear reduction which allows for increased torque to be deliv- Shift Positions ered to both the front and rear wheels.
Page 510: Shifting Procedures
508 STARTING AND OPERATING NOTE: Refer to “Selec-Terrain – If Equipped” for further WARNING! (Continued) information on the various positions and their intended in the NEUTRAL (N) position without first fully usages. engaging the parking brake. The NEUTRAL (N) Shifting Procedures position disengages both the front and rear drive- shafts from the powertrain and will allow the vehicle Shifting Into 4X4 LOW...
Page 511 STARTING AND OPERATING 509 NOTE: If shift conditions/interlocks are not met a mes- sage will flash from the Electronic Vehicle Information Center (EVIC)/Driver Information Display (DID) with instructions on how to complete the requested shift. Refer to “Electronic Vehicle Information Center (EVIC)/ Driver Information Display (DID) in “Understanding Your Instrument Panel”...
Page 512 510 STARTING AND OPERATING NOTE: NEUTRAL Shift Procedure • If shift conditions/interlocks are not met, a message WARNING! will flash from the Electronic Vehicle Information Center (EVIC)/Driver Information Display (DID) with You or others could be injured or killed if you leave instructions on how to complete the requested shift.
Page 513 STARTING AND OPERATING 511 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL. 6. Using a ballpoint pen or similar object, press and hold the recessed power transfer unit NEUTRAL (N) button (located by the selector switch) for four seconds. The light behind the NEUTRAL (N) symbol will blink, indicating shift in progress.
Page 514: Rear Electronic Locker (E-Locker) System - If Equipped
512 STARTING AND OPERATING 11. Release the brake pedal for five seconds and ensure Rear Electronic Locker (E-Locker) System — If that there is no vehicle movement. Equipped The Rear E-Locker System features a mechanical locking 12. Shift the transmission to NEUTRAL. rear differential to provide better traction in the 4WD 13.
Page 515 STARTING AND OPERATING 513 Deactivating The Rear E-Locker System will begin to flash. When the shift is complete the REAR LOCK indicator lights will remain on. To deactivate the Rear E-Locker System, the following • When disengaging Rear E-Locker, the indicator lights conditions must be met: in the instrument cluster and on the REAR LOCK 1.
Page 516: Selec-Terrain
514 STARTING AND OPERATING LOW shift conditions/interlocks are not met, a mes- sage will flash from the Electronic Vehicle Information Center (EVIC)/Driver Information Display (DID) with instructions on how to complete the requested shift. SELEC-TERRAIN Description Selec-Terrain combines the capabilities of the vehicle control systems, along with driver input, to provide the best performance for all terrains.
Page 517 STARTING AND OPERATING 515 • Snow — Tuning set for additional stability in inclem- • Rock — Off-road calibration only available in 4WD ent weather. Use on and off road on loose traction LOW range. Traction based tuning with improved surfaces such as snow.
Page 518: On-Road Driving Tips
516 STARTING AND OPERATING Vehicle Information Center (EVIC)” or “Driver Informa- OFF-ROAD DRIVING TIPS tion Display (DID)” in “Understanding Your Instrument When To Use 4WD LOW Range Panel” for further information. When off-road driving, shift to 4WD LOW for additional ON-ROAD DRIVING TIPS traction and control on slippery or difficult terrain, ascending or descending steep hills, and to increase...
Page 519 STARTING AND OPERATING 517 and/or the flow rate is reduced. If you must cross CAUTION! flowing-water, avoid depths in excess of 9 inches (22 cm). The flowing water can erode the streambed causing your When driving through water, do not exceed 5 mph vehicle to sink into deeper water.
Page 520: Driving In Snow, Mud And Sand
518 STARTING AND OPERATING Driving In Snow, Mud And Sand Before climbing a steep hill, shift the transmission to a lower gear and shift the 4WD System to 4WD LOW. Use In heavy snow, when pulling a load, or for additional first gear and 4WD LOW for very steep hills.
Page 521: Traction Downhill
STARTING AND OPERATING 519 turning against engine compression drag. This will per- WARNING! (Continued) mit you to control the vehicle speed and direction. down a hill in REVERSE gear carefully. Never back When descending mountains or hills, repeated braking down a hill in NEUTRAL using only the brake. can cause brake fade with loss of braking control.
Page 522: Power Steering
520 STARTING AND OPERATING • Check threaded fasteners for looseness, particularly on WARNING! (Continued) the chassis, drivetrain components, steering, and sus- not have full braking power when you need it to pension. Retighten them, if required, and torque to the prevent a collision.
Page 523 STARTING AND OPERATING 521 assist, you will still have the ability to steer the vehicle If the “POWER STEERING SYSTEM HOT - PERFOR- manually. MANCE MAY BE LIMITED” message and an icon are displayed on the EVIC/DID screen, it indicates that WARNING! extreme steering maneuvers may have occurred, which caused an over temperature condition in the power...
Page 524: Electric Park Brake (Epb)
522 STARTING AND OPERATING NOTE: The parking brake is primarily intended to prevent the vehicle from rolling while parked. Before leaving the • Even if the power steering assistance is no longer vehicle, make sure that the park brake is applied. Also, be operational, it is still possible to steer the vehicle.
Page 525 STARTING AND OPERATING 523 while you apply the park brake, you may notice a small amount of brake pedal movement. The park brake can be applied even when the ignition switch is OFF but the BRAKE telltale light will not illuminate, however, it can only be released when the ignition switch is in the ON/RUN position.
Page 526 524 STARTING AND OPERATING The park brake will release automatically when the NOTE: When parking on a hill, it is important to turn the ignition switch is ON, the transmission is in DRIVE or front wheels toward the curb on a downhill grade and REVERSE, the driver seat belt is buckled, and an attempt away from the curb on an uphill grade.
Page 527 STARTING AND OPERATING 525 WARNING! (Continued) WARNING! (Continued) • Never leave children alone in a vehicle, or with • Always fully apply the parking brake when leav- access to an unlocked vehicle. Allowing children to ing your vehicle, or it may roll and cause damage or be in a vehicle unattended is dangerous for a injury.
Page 528: Auto Park Brake
526 STARTING AND OPERATING sound. The rear stop lamps will also be illuminated This may be accompanied by the BRAKE telltale light automatically while the vehicle remains in motion. flashing. In this event, urgent service of the electric park brake system is required. Do not rely on the parking To disengage the park brake while the vehicle is in brake to hold the vehicle stationary.
Page 529: Safehold
STARTING AND OPERATING 527 • There is no attempt to depress the brake pedal or SafeHold accelerator pedal. SafeHold is a safety feature of the Electric Park Brake • The clutch pedal is not pressed. System that will engage the park brake automatically if the vehicle is left unsecured while the ignition switch is •...
Page 530 528 STARTING AND OPERATING When servicing your rear brakes, it may be necessary for When brake service work is complete, the following steps you or your technician to push the rear piston into the must be followed to reset the park brake system to rear caliper bore.
Page 531: Brake System
STARTING AND OPERATING 529 BRAKE SYSTEM WARNING! Your vehicle is equipped with dual hydraulic brake • Riding the brakes can lead to brake failure and systems. If either of the two hydraulic systems loses possibly a collision. Driving with your foot resting normal capability, the remaining system will still func- or riding on the brake pedal can result in abnor- tion.
Page 532: Electronic Brake Control System
530 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM overslip of the rear wheels to avoid vehicle instability, and to prevent the rear axle from entering ABS before the Your vehicle is equipped with an advanced Electronic front axle. Brake Control system (EBC). This system includes Elec- tronic Brake Force Distribution (EBD), Anti-Lock Brake Brake System Warning Light System (ABS), Brake Assist System (BAS), Hill Start...
Page 533 STARTING AND OPERATING 531 • A slight drop of the brake pedal at the end of the stop. braking conditions. The system automatically prevents wheel lock, and enhances vehicle control during braking. These are all normal characteristics of ABS. The ABS performs a self-check cycle to ensure that the ABS is working properly each time the vehicle is started WARNING! and driven.
Page 534: Anti-Lock Brake Warning Light
532 STARTING AND OPERATING Anti-Lock Brake Warning Light WARNING! (Continued) The amber “Anti-Lock Brake Warning Light” will turn on • The ABS cannot prevent the natural laws of phys- when the ignition switch is turned to the ON position ics from acting on the vehicle, nor can it increase and may stay on for as long as four seconds.
Page 535: Brake Assist System (Bas)
STARTING AND OPERATING 533 Brake Assist System (BAS) WARNING! The BAS is designed to optimize the vehicle’s braking The Brake Assist System (BAS) cannot prevent the capability during emergency braking maneuvers. The natural laws of physics from acting on the vehicle, system detects an emergency braking situation by sens- nor can it increase the traction afforded by prevailing ing the rate and amount of brake application and then...
Page 536 534 STARTING AND OPERATING does not apply the throttle before this time expires, the is in PARK or NEUTRAL. For vehicles equipped with system will release brake pressure and the vehicle will a manual transmission, if the clutch is pressed, HSA roll down the hill as normal.
Page 537 STARTING AND OPERATING 535 Towing With HSA WARNING! (Continued) HSA will also provide assistance to mitigate roll back • Failure to follow these warnings may cause the while towing a trailer. vehicle to roll down the incline and could collide with another vehicle, object or person, and cause WARNING! serious or fatal injury.
Page 538: Traction Control System (Tcs)
536 STARTING AND OPERATING • If disabling HSA using Uconnect Settings, refer to 7. Rotate the steering wheel back to center and then an “Uconnect Settings” in “Understanding Your Instru- additional slighty more than one-half turn to the right. ment Panel” for further information. 8.
Page 539: Electronic Stability Control (Esc)
STARTING AND OPERATING 537 • Oversteer - when the vehicle is turning more than other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied appropriate for the steering wheel position. to the wheel that is not spinning.
Page 540 538 STARTING AND OPERATING WARNING! WARNING! (Continued) • Vehicle modifications, or failure to properly main- • Electronic Stability Control (ESC) cannot prevent tain your vehicle, may change the handling charac- the natural laws of physics from acting on the teristics of your vehicle, and may negatively affect vehicle, nor can it increase the traction afforded by the performance of the ESC system.
Page 541 STARTING AND OPERATING 539 ESC Operating Modes To enter the “Partial Off” mode, momentarily push the “ESC Off” switch and the “ESC Off Indicator Light” will NOTE: Depending upon model and mode of operation, illuminate. To turn the ESC on again, momentarily push the ESC system may have multiple operating modes.
Page 542 540 STARTING AND OPERATING • Trailer Sway control (TSC) is disabled when the ESC ESC modes may also be affected by drive modes – if system is in the “Partial Off” mode. equipped. Full Off – If Equipped WARNING! This mode is intended for off-highway or off-road use •...
Page 543 STARTING AND OPERATING 541 position. It should go out with the engine running. If the NOTE: “ESC Activation/Malfunction Indicator Light” comes on • The “ESC Activation/Malfunction Indicator Light” continuously with the engine running, a malfunction has and the “ESC OFF Indicator Light” come on momen- been detected in the ESC system.
Page 544: Electronic Roll Mitigation (Erm)
542 STARTING AND OPERATING Electronic Roll Mitigation (ERM) WARNING! This system anticipates the potential for wheel lift by Many factors, such as vehicle loading, road condi- monitoring the driver’s steering wheel input and the tions and driving conditions, influence the chance speed of the vehicle.
Page 545: Ready Alert Braking (Rab)
STARTING AND OPERATING 543 trailer tongue weight recommendations. Refer to “Trailer occur by monitoring how fast the throttle is released by Towing” in this section for further information. the driver. The EBC will prepare the brake system for a panic stop. When TSC is functioning, the “ESC Activation/ Malfunction Indicator Light”...
Page 546: Hill Descent Control (Hdc) - If Equipped
544 STARTING AND OPERATING vehicle stability. The only notification the driver receives HDC has three states: that the feature is active is the torque applied to the 1. Off (feature is not enabled and will not activate). steering wheel. 2. Enabled (feature is enabled and ready but activation NOTE: The DST feature is only meant to help the driver conditions are not met, or driver is actively overriding realize the correct course of action through small torques...
Page 547 STARTING AND OPERATING 545 • 4th = 2.5 mph (4 km/h) Activating HDC • 5th = 3.1 mph (5 km/h) Once HDC is enabled, it will activate automatically if driven down a grade of sufficient magnitude. The set • 6th = 3.7 mph (6 km/h) speed for HDC is selectable by the driver, and can be •...
Page 548 546 STARTING AND OPERATING • The parking brake is applied. Deactivating HDC • Driver door opens. HDC will be deactivated but remain available if any of the following conditions occur: • The vehicle is driven greater than 20 mph (32 km/h) •...
Page 549: Selec Speed Control (Ssc) - If Equipped
STARTING AND OPERATING 547 • The cluster icon and switch lamp will flash for several Selec Speed Control (SSC) — If Equipped seconds then extinguish when the driver pushes the SSC is intended for off road driving in 4WD Low Range HDC switch but enable conditions are not met.
Page 550 548 STARTING AND OPERATING • Vehicle speed is below 5 mph (8 km/h) and the level of set speed reduction depends on the magnitude of grade. The following summarizes the SSC • Parking brake is released. set speeds: • Driver door is closed. SSC Target Set Speeds •...
Page 551 STARTING AND OPERATING 549 • NEUTRAL = 1.2 mph (2 km/h) Deactivating SSC • PARK = SSC remains enabled but not active SSC will be deactivated but remain available if any of the following conditions occur: NOTE: • Driver overrides SSC set speed with throttle or brake •...
Page 552 550 STARTING AND OPERATING • The vehicle is driven greater than 20 mph (32 km/h) • The cluster icon and switch lamp will flash for several for greater than 70 seconds. seconds then extinguish when SSC disables due to excess speed. •...
Page 553: Tire Safety Information
STARTING AND OPERATING 551 TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 554 552 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 555 STARTING AND OPERATING 553 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 556: Tire Identification Number (Tin)
554 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 557 STARTING AND OPERATING 555 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 558: Tire Terminology And Definitions
556 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 559: Tire Loading And Tire Pressure
STARTING AND OPERATING 557 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (Door)
Page 560 558 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry.
Page 561 STARTING AND OPERATING 559 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 562 560 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 563 STARTING AND OPERATING 561...
Page 564: Tires - General Information
562 STARTING AND OPERATING • Tread Wear WARNING! • Ride Comfort Overloading of your tires is dangerous. Overloading Safety can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the WARNING! recommended load capacity for your vehicle. Never overload them.
Page 565: Tire Inflation Pressures
STARTING AND OPERATING 563 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures can cause steering prob- resulting in higher fuel consumption. lems. You could lose control of your vehicle. • Unequal tire pressures from one side of the vehicle Tread Wear to the other can cause the vehicle to drift to the Improper cold tire inflation pressures can cause abnor-...
Page 566 564 STARTING AND OPERATING At least once a month: 1 mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire side- pocket-type pressure gauge.
Page 567: Tire Pressures For High Speed Operation
STARTING AND OPERATING 565 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
Page 568: Tire Types
566 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 569 STARTING AND OPERATING 567 Summer tires do not contain the all season designation or If you need snow tires, select tires mountain/snowflake symbol on the tire sidewall. Use equivalent in size and type to the Summer tires only in sets of four; failure to do so may original equipment tires.
Page 570: Run Flat Tires - If Equipped
568 STARTING AND OPERATING poorer than that of non-studded tires. Some states pro- Spare Tires — If Equipped hibit studded tires; therefore, local laws should be NOTE: For vehicles equipped with Tire Service Kit checked before using these tire types. instead of a spare tire, please refer to the “Tire Service Run Flat Tires —...
Page 571 STARTING AND OPERATING 569 rotation for your vehicle. If your vehicle has this option, Do not install a wheel cover or attempt to mount a refer to an authorized tire dealer for the recommended conventional tire on the compact spare wheel, since the tire rotation pattern.
Page 572: Tire Spinning
570 STARTING AND OPERATING front or rear axle of your vehicle, but it is not. This spare WARNING! tire may have limited tread life. When the tread is worn to the tread wear indicators, the temporary use full size Limited use spares are for emergency use only. In- spare tire needs to be replaced.
Page 573: Tread Wear Indicators
STARTING AND OPERATING 571 Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Page 574: Life Of Tire
572 STARTING AND OPERATING worn to the tread wear indicators, the tire should be tread life. Rotation of these tires per the vehicle main- replaced. Refer to “Replacement Tires” in this section for tenance schedule is highly recommended. further information. WARNING! Life Of Tire Tires and the spare tire should be replaced after six...
Page 575 STARTING AND OPERATING 573 wear and correct cold tire inflation pressures. The manu- It is recommended you contact your authorized tire facturer strongly recommends that you use tires equiva- dealer or original equipment dealer with any questions lent to the originals in size, quality and performance you may have on tire specifications or capability.
Page 576: Tire Chains (Traction Devices)
574 STARTING AND OPERATING TIRE CHAINS (TRACTION DEVICES) WARNING! (Continued) Use of traction devices require sufficient tire-to-body • Never use a tire with a smaller load index or clearance. Follow these recommendations to guard capacity, other than what was originally equipped against damage.
Page 577 STARTING AND OPERATING 575 Four Wheel Drive (4WD) Non-Trailhawk Models with- CAUTION! out a Two-Speed Power Takeoff Unit • Use on Front Tires Only • Original equipment 225/65R17 and 225/60R18 tire • Damage to Front Wheel Drive (FWD) Models may sizes are not chainable.
Page 578: Tire Rotation Recommendations
576 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Observe the traction device manufacturer’s instruc- To avoid damage to your vehicle or tires, observe the tions on the method of installation, operating following precautions: speed, and conditions for use. Always use the •...
Page 579 STARTING AND OPERATING 577 type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Refer to the “Maintenance Schedule” for the proper maintenance intervals. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed.
Page 580: Tire Pressure Monitor System (Tpms)
578 STARTING AND OPERATING CAUTION! (Continued) damage to the power transfer unit. Tire rotation schedule should be followed to balance tire wear. TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recom- mended cold placard pressure.
Page 581 STARTING AND OPERATING 579 into the tire sidewall. Refer to “Tires – General Informa- NOTE: When filling warm tires, the tire pressure may tion” in “Starting And Operating” for information on need to be increased up to an additional 4 psi (30 kPa) how to properly inflate the vehicle’s tires.
Page 582 580 STARTING AND OPERATING the tire pressure to rise to approximately 28 psi (193 kPa), CAUTION! (Continued) but the “Tire Pressure Monitoring Telltale Light” will still replacement equipment that is not of the same size, be on. In this situation, the “Tire Pressure Monitoring type, and/or style.
Page 583: Premium System - If Equipped
STARTING AND OPERATING 581 • Seasonal temperature changes will affect tire pressure, NOTE: and the TPMS will monitor the actual tire pressure in • The TPMS is not intended to replace normal tire care the tire. and maintenance, or to provide warning of a tire failure or condition.
Page 584 582 STARTING AND OPERATING • Various Tire Pressure Monitoring System messages, which display in the Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID). • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires.
Page 585 STARTING AND OPERATING 583 update, the pressure values in the graphic display in the display a SERVICE TPM SYSTEM message for a mini- EVIC/DID will return to their original color, and the mum of five seconds and then display dashes (- -) in “Tire Pressure Monitoring Telltale Light”...
Page 586 584 STARTING AND OPERATING no longer exists, the “Tire Pressure Monitoring Telltale Vehicles With Matching Full-Size Spare Light” will no longer flash, and the “SERVICE TPM 1. The matching full size spare wheel and tire assembly SYSTEM” message will no longer display, and a pressure has a tire pressure monitoring sensor that can be value will display in place of the dashes.
Page 587 STARTING AND OPERATING 585 4. The EVIC/DID will display a graphic showing the tire graphic in the EVIC/DID will still display a different pressure value in the same color as the other pressure color pressure value and an Inflate to XX message. values in place of the different color low tire pressure 3.
Page 588: General Information
586 STARTING AND OPERATING will turn off and the graphic in the EVIC/DID will NOTE: Changes or modifications not expressly approved display a new pressure value instead of dashes (- -), as by the party responsible for compliance could void the long as no tire pressure is below the low-pressure user’s authority to operate the equipment.
Page 589: Reformulated Gasoline
STARTING AND OPERATING 587 a cause for concern. However, if the engine is heard The use of reformulated gasoline is recommended. Prop- making a heavy knocking sound, see your dealer imme- erly blended reformulated gasoline will provide im- diately. Use of gasoline with an octane number lower proved performance and durability of engine and fuel than 87 can cause engine failure and may void or not be system components.
Page 590: E-85 Usage In Non-Flex Fuel Vehicles
588 STARTING AND OPERATING Problems that result from using gasoline containing more If a Non-FFV vehicle is inadvertently fueled with E-85 than 15% ethanol (E-15) or gasoline containing methanol fuel, the engine will have some or all of these symptoms: are not the responsibility of the manufacturer and may •...
Page 591: Materials Added To Fuel
STARTING AND OPERATING 589 without MMT be used in your vehicle. The MMT content Designated TOP TIER Detergent Gaso- of gasoline may not be indicated on the gasoline pump, line contains a higher level of deter- therefore, you should ask your gasoline retailer whether gents to further aide in minimizing the gasoline contains MMT.
Page 592: Fuel System Cautions
590 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 593: Carbon Monoxide Warnings
STARTING AND OPERATING 591 Carbon Monoxide Warnings WARNING! (Continued) time the vehicle is raised. Have any abnormal WARNING! conditions repaired promptly. Until repaired, drive Carbon monoxide (CO) in exhaust gases is deadly. with all side windows fully open. Follow the precautions below to prevent carbon monoxide poisoning: FLEXIBLE FUEL (2.4L ENGINE ONLY) —...
Page 594: Ethanol Fuel (E-85)
592 STARTING AND OPERATING Fuel Requirements CAUTION! If your vehicle is E-85 compatible, it will operate on Only vehicles with the E-85 fuel filler door label or a unleaded gasoline with any octane rating, or solely E-85 yellow gas cap can operate on E-85. fuel, or any mixture of these fuels.
Page 595: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
STARTING AND OPERATING 593 NOTE: FCA Material Standard MS-6395. It is recommended that engine oils that are API Certified and meet the require- • Use seasonally adjusted E-85 fuel (ASTM D5798). With ments of Material Standard MS-6395 be used. MS-6395 non-seasonally adjusted E-85 fuel, hard starting and contains additional requirements, developed during ex- rough idle following start up may be experienced even...
Page 596: Cruising Range
594 STARTING AND OPERATING Cruising Range Maintenance Because E-85 fuel contains less energy per gallon/liter CAUTION! than gasoline, an increase in fuel consumption will be experienced. The miles per gallon (mpg)/kilometers per Do not use ethanol mixtures greater than 85% in your liter and the driving range will decrease by approxi- vehicle.
Page 597 STARTING AND OPERATING 595 1. Push the fuel filler door release switch (located on the driver’s side door trim). Fuel Filler Cap (Gas Cap) NOTE: Fuel Filler Door Release Switch • In certain cold conditions, ice may prevent the fuel 2.
Page 598 596 STARTING AND OPERATING • When the fuel nozzle “clicks” or shuts off, the fuel tank CAUTION! (Continued) is full. Light (MIL)” to illuminate, due to fuel vapors • Tighten the gas cap about one quarter turn until you escaping from the system. hear one click.
Page 599: Emergency Fuel Filler Door Release
STARTING AND OPERATING 597 WARNING! (Continued) • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. Emergency Fuel Filler Door Release If you are unable to open the fuel filler door, use the fuel filler door emergency release.
Page 600: Loose Fuel Filler Cap Message
598 STARTING AND OPERATING Information (EVIC) or Driver Information Display (DID)” in “Understanding Your Instrument Panel” for further information. Tighten the fuel filler cap until a “clicking” sound is heard. This is an indication that the fuel filler cap is properly tightened. Refer to “Onboard Diagnostic System”...
Page 601 STARTING AND OPERATING 599 included on this label and indicates the Month, Day and Each axle GAWR is determined by the components in the Hour of manufacture. The bar code that appears on the system with the lowest load carrying capacity (axle, bottom of the label is your VIN.
Page 602 600 STARTING AND OPERATING Curb Weight front or rear axles has been exceeded but the total load is within the specified GVWR. If so, weight must be shifted The curb weight of a vehicle is defined as the total weight from front to rear or rear to front as appropriate until the of the vehicle with all fluids, including vehicle fuel, at full specified weight limitations are met.
Page 603: Trailer Towing
STARTING AND OPERATING 601 TRAILER TOWING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting And Operating” for In this section you will find safety tips and information further information. on limits to the type of towing you can reasonably do with your vehicle.
Page 604 602 STARTING AND OPERATING WARNING! (Continued) WARNING! vehicle. If you use a standard weight-carrying hitch, It is important that you do not exceed the maximum you could lose control of your vehicle and cause a front or rear GAWR. A dangerous driving condition collision.
Page 605 STARTING AND OPERATING 603 that typically provides adjustable friction associated with safety. The addition of a friction/hydraulic sway control the telescoping motion to dampen any unwanted trailer also dampens sway caused by traffic and crosswinds and swaying motions while traveling. contributes positively to tow vehicle and trailer stability.
Page 606: Trailer Hitch Classification
604 STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
Page 607: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 605 Trailer Towing Weights (Maximum Trailer Weight Ratings) Engine/ Maximum GTW Maximum Tongue Model Frontal Area Transmission (Gross Trailer Wt.) Wt. (See Note) 2.4L/Automatic FWD or 4WD 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (90 kg) with or without Trailer Tow Package...
Page 608: Trailer And Tongue Weight
606 STARTING AND OPERATING • The weight of any other type of cargo or equipment Trailer And Tongue Weight put in or on your vehicle. Never exceed the maximum tongue weight stamped on • The weight of the driver and all passengers. your bumper or trailer hitch.
Page 609 STARTING AND OPERATING 607 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 610 608 STARTING AND OPERATING Towing Requirements — Tires WARNING! (Continued) • Do not attempt to tow a trailer while using a compact 3. GAWR spare tire. 4. Tongue weight rating for the trailer hitch uti- • Proper tire inflation pressures are essential to the safe lized.
Page 611 STARTING AND OPERATING 609 tire replacement procedures. Replacing tires with a WARNING! higher load carrying capacity will not increase the • Do not connect trailer brakes to your vehicle’s vehicle’s GVWR and GAWR limits. hydraulic brake lines. It can overload your brake Towing Requirements —...
Page 612 610 STARTING AND OPERATING CAUTION! (Continued) could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety.
Page 613: Towing Tips
STARTING AND OPERATING 611 Towing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. Automatic Transmission The DRIVE range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.
Page 614 612 STARTING AND OPERATING Electronic Speed Control — If Equipped Cooling System • Do not use in hilly terrain or with heavy loads. To reduce potential for engine and transmission over- heating, take the following actions: • When using the speed control, if you experience speed City Driving drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
Page 615: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 613 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle 4X4 Models Front- Wheels 1-Speed Towing Wheel Power Condi- Drive 2-Speed Power Transfer Unit Trans- tion (FWD) Ground fer Unit Models Flat NONE See Instructions: •...
Page 616 614 STARTING AND OPERATING 4X4 Models Front- Wheels 1-Speed Towing Wheel Power Condi- Drive 2-Speed Power Transfer Unit Trans- tion (FWD) Ground fer Unit Models Dolly Front NOT ALLOWED LOWED Rear NOT ALLOWED LOWED LOWED...
Page 617 STARTING AND OPERATING 615 4X4 Models Front- Wheels 1-Speed Towing Wheel Power Condi- Drive 2-Speed Power Transfer Unit Trans- tion (FWD) Ground fer Unit Models Trailer NOTE: • You must ensure that the Auto Park Brake feature is disabled before towing this vehicle, to avoid inadvertent Electric Park Brake engagement.
Page 618: Recreational Towing - Front-Wheel Drive (Fwd) Models
616 STARTING AND OPERATING Recreational Towing — Front-Wheel Drive (FWD) 5. Turn the ignition to the ON/RUN position, but do not Models start the engine. DO NOT flat tow this vehicle. Damage to the drivetrain 6. Press and hold the brake pedal. will result.
Page 619: Recreational Towing - 4X4 Models With 1-Speed Power Transfer Unit
STARTING AND OPERATING 617 Recreational Towing — 4X4 Models With 1-Speed Recreational Towing — 4X4 Models With 2-Speed Power Transfer Unit Power Transfer Unit The power transfer unit must be shifted into NEUTRAL Recreational towing is not allowed. These models do (N) and the transmission must be in PARK for recre- not have a NEUTRAL (N) position in the power transfer unit.
Page 620 618 STARTING AND OPERATING CAUTION! (Continued) CAUTION! (Continued) will cause severe transmission and/or power trans- power transfer unit damage. Damage from im- fer unit damage. Tow with all four wheels either proper towing is not covered under the New Ve- ON the ground, or OFF the ground (using a vehicle hicle Limited Warranty.
Page 621 STARTING AND OPERATING 619 1. Bring the vehicle to a complete stop and shift the WARNING! (Continued) transmission to PARK. position disengages both the front and rear drive- 2. Turn the engine OFF. shafts from the powertrain and will allow the vehicle to roll, even if the transmission is in PARK.
Page 622 620 STARTING AND OPERATING 10. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 11. Shift the transmission to NEUTRAL. 12. Apply the parking brake. 13. Shift the transmission into PARK, turn the engine OFF, and remove the key fob.
Page 623 STARTING AND OPERATING 621 NOTE: Shifting Out Of NEUTRAL (N) • Steps 1 through 5 are requirements that must be met Use the following procedure to prepare your vehicle for normal usage. before pushing the NEUTRAL (N) button, and must continue to be met until the shift has been completed.
Page 624 622 STARTING AND OPERATING NOTE: When shifting the power transfer unit out of NEUTRAL (N), the engine should remain OFF to avoid gear clash. 9. Shift the transmission into PARK. 10. Release the brake pedal. 11. Disconnect vehicle from the tow vehicle. 12.
Page 625 STARTING AND OPERATING 623 • The ignition switch must be in the ON/RUN position NOTE: for a shift to take place and for the position indicator • Steps 1 through 5 are requirements that must be met lights to be operable. If the ignition switch is not in the before pushing the NEUTRAL (N) button, and must ON/RUN position, the shift will not take place and no continue to be met until the shift has been completed.
Page 627 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...627 JACKING AND TIRE CHANGING ..641 ▫ Jack Location/Spare Tire Stowage ..642 IF YOUR ENGINE OVERHEATS .
Page 628 626 WHAT TO DO IN EMERGENCIES GEAR SELECTOR OVERRIDE ... . .660 ENHANCED ACCIDENT RESPONSE SYSTEM (EARS) ..... . .666 TOWING A DISABLED VEHICLE .
Page 629: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 627 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the switch bank below the radio screen. potential for overheating your engine by taking the appropriate action.
Page 630: Wheel And Tire Torque Specifications
628 WHAT TO DO IN EMERGENCIES NOTE: There are steps that you can take to slow down WARNING! (Continued) an impending overheat condition: do not open the hood until the radiator has had time • If your air conditioner (A/C) is on, turn it off. The A/C to cool.
Page 631: Torque Specifications
WHAT TO DO IN EMERGENCIES 629 Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 100 Ft-Lbs (135 N·m) M12 x 1.25 19 mm **Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
Page 632: Tire Service Kit - If Equipped
630 WHAT TO DO IN EMERGENCIES WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. TIRE SERVICE KIT —...
Page 633: Tire Service Kit Storage
WHAT TO DO IN EMERGENCIES 631 Tire Service Kit Storage Tire Service Kit Components And Operation The Tire Service Kit is stowed under the load floor behind the rear seat. 1. Open the liftgate. 2. Lift the access cover using the load floor handle. Tire Service Kit Components 1 —...
Page 634: Tire Service Kit Usage Precautions
632 WHAT TO DO IN EMERGENCIES Using The Mode Select Knob And Hoses Using The Deflation Button Your Tire Service Kit is equipped with the following Push the Deflation Button (2) to reduce the air symbols to indicate the air or sealant mode. pressure in the tire if it becomes over-inflated.
Page 635 WHAT TO DO IN EMERGENCIES 633 • The Sealant Bottle (1) and Sealant Hose (6) are a one tire application use and need to be replaced after each use. Always replace these components immediately at your original equipment vehicle dealer. •...
Page 636 634 WHAT TO DO IN EMERGENCIES • You can use the Tire Service Kit air pump to inflate WARNING! bicycle tires. The kit also comes with two needles, • Do not attempt to seal a tire on the side of the located in the Accessory Storage Compartment (on the bottom of the air pump) for inflating sport balls, rafts, vehicle closest to traffic.
Page 637: Sealing A Tire With Tire Service Kit
WHAT TO DO IN EMERGENCIES 635 WARNING! (Continued) WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Tire Service Kit Sealant solution contains latex. In heat source. case of an allergic reaction or rash, consult a phy- •...
Page 638 636 WHAT TO DO IN EMERGENCIES on the ground. This will provide the best positioning 4. Remove the cap from the valve stem and then screw of the kit when injecting the sealant into the deflated the fitting at the end of the Sealant Hose (6) onto the tire and running the air pump.
Page 639 WHAT TO DO IN EMERGENCIES 637 • After pushing the Power Button (4), the sealant (white 2. Connect the Power Plug (8) to a different 12 Volt fluid) will flow from the Sealant Bottle (1) through the power outlet in your vehicle or another vehicle, if Sealant Hose (6) and into the tire.
Page 640 638 WHAT TO DO IN EMERGENCIES quickly from approximately 70 psi (4.8 Bar) to the If the tire inflates to the recommended pressure or is at actual tire pressure when the Sealant Bottle (1) is least 26 psi (1.8 Bar) pressure within 15 minutes: empty.
Page 641 WHAT TO DO IN EMERGENCIES 639 CAUTION! (Continued) WARNING! • Failure to reinstall the cap on the fitting at the end Tire Service Kit is not a permanent flat tire repair. of the Sealant Hose (6) can result in sealant con- Have the tire inspected and repaired or replaced after tacting your skin, clothing, and the vehicle’s inte- using Tire Service Kit.
Page 642 640 WHAT TO DO IN EMERGENCIES 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the Tire Service Kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from 12 stem.
Page 643: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES 641 (F) Sealant Bottle And Hose Replacement: 6. Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and return the hose to its 1. Uncoil the Sealant Hose (6) (clear in color). storage area (located on the bottom of the air pump).
Page 644: Jack Location/Spare Tire Stowage
642 WHAT TO DO IN EMERGENCIES WARNING! (Continued) under a raised vehicle, take it to a service center where it can be raised on a lift. • Never start or run the engine while the vehicle is on a jack. •...
Page 645 WHAT TO DO IN EMERGENCIES 643 Jack And Spare Tire Fastener Jack And Tool Assembly 5. Remove the chocks. NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack is partially 6. Remove the scissors jack and wheel bolt wrench from expanded, the tension between the two attachment the spare wheel as an assembly.
Page 646: Preparations For Jacking
644 WHAT TO DO IN EMERGENCIES 2. Turn on the Hazard Warning flasher. WARNING! 3. Set the parking brake. A loose tire or jack thrown forward in a collision or 4. Place the gear selector into PARK. hard stop could endanger the occupants of the ve- hicle.
Page 647: Jacking Instructions
WHAT TO DO IN EMERGENCIES 645 Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. • Do not get under the vehicle when it is on a jack. If Carefully follow these tire changing warnings to help prevent personal injury or damage to your you need to get under a raised vehicle, take it to a...
Page 648 646 WHAT TO DO IN EMERGENCIES 1. Remove the spare tire, jack, and wheel bolt wrench. 2. If equipped with aluminum wheels where the center cap covers the wheel bolts, use the wheel bolt wrench to pry the center cap off carefully before raising the vehicle.
Page 649 WHAT TO DO IN EMERGENCIES 647 Jacking Locations Rear Jacking Location...
Page 650 648 WHAT TO DO IN EMERGENCIES Rear Jacking Engagement Point Front Jacking Location...
Page 651 WHAT TO DO IN EMERGENCIES 649 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the wheel bolts and tire. 7.
Page 652 650 WHAT TO DO IN EMERGENCIES NOTE: CAUTION! • For vehicles so equipped, do not attempt to install a Be sure to mount the spare tire with the valve stem center cap or wheel cover on the compact spare. facing outward. The vehicle could be damaged if the •...
Page 653 WHAT TO DO IN EMERGENCIES 651 10. Lower the vehicle to the ground by turning the jack handle counterclockwise. 11. Finish tightening the wheel bolts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the wheel bolts in a star pattern until each wheel bolt has been tightened twice.
Page 654: Road Tire Installation
652 WHAT TO DO IN EMERGENCIES WARNING! (Continued) the places provided. Have the deflated (flat) tire repaired or replaced immediately. Road Tire Installation 1. Mount the road tire on the axle. 2. Install the remaining wheel bolts with the threaded end of the wheel bolt toward the wheel.
Page 655: Jump-Starting Procedures
WHAT TO DO IN EMERGENCIES 653 3. Lower the vehicle to the ground by turning the jack JUMP-STARTING PROCEDURES handle counterclockwise. If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in 4.
Page 656: Preparations For Jump-Start
654 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment, behind the left headlight assembly.
Page 657: Jump Starting Procedure
WHAT TO DO IN EMERGENCIES 655 3. If using another vehicle to jump-start the battery, park WARNING! (Continued) the vehicle within the jumper cables reach, set the ignitionswitch is ON. You can be injured by mov- parking brake and make sure the ignition is OFF. ing fan blades.
Page 658 656 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the jumper cable to the negative (-) damage to the charging system of the booster vehicle post of the discharged battery. The resulting electri- or the discharged vehicle.
Page 659: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 657 Disconnecting The Jumper Cables CAUTION! 1. Disconnect the negative (-) end of the jumper cable Accessories plugged into the vehicle power outlets from the engine ground of the vehicle with the dis- draw power from the vehicle’s battery, even when not charged battery.
Page 660 658 WHAT TO DO IN EMERGENCIES NOTE: Shifts between DRIVE and REVERSE can only be CAUTION! (Continued) achieved at wheel speeds of 5 mph (8 km/h) or less. • When “rocking” a stuck vehicle by shifting be- Whenever the transmission remains in NEUTRAL for tween DRIVE and REVERSE, do not spin the more than two seconds, you must press the brake pedal wheels faster than 15 mph (24 km/h), or drivetrain...
Page 661: Recovery Strap - If Equipped
WHAT TO DO IN EMERGENCIES 659 WARNING! WARNING! Fast spinning tires can be dangerous. Forces gener- Recovery straps should only be used in emergencies ated by excessive wheel speeds may cause damage, or to rescue stranded vehicles. Only use Recovery straps even failure, of the axle and tires.
Page 662: Gear Selector Override
660 WHAT TO DO IN EMERGENCIES GEAR SELECTOR OVERRIDE WARNING! (Continued) If a malfunction occurs and the gear selector cannot be 40 feet from the recovery area when using the recov- moved out of the PARK position, you can use the ery strap.
Page 663: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 661 6. Move the gear selector to the NEUTRAL position. TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled 7. The vehicle may then be started in NEUTRAL. vehicle using a commercial towing service. If the trans- 8.
Page 664 662 WHAT TO DO IN EMERGENCIES 4X4 MODELS Towing Wheels OFF 1–SPEED 2–SPEED Condition the Ground MOD- POWER TRANSFER UNIT POWER TRANSFER UNIT Wheel Lift Rear NOT ALLOWED NOT ALLOWED or Dolly LOWED Front NOT ALLOWED NOT ALLOWED Flatbed BEST BEST METHOD METHOD Proper towing or lifting equipment is required to prevent...
Page 665: Front-Wheel Drive (Fwd) Models
WHAT TO DO IN EMERGENCIES 663 • Vehicles with a discharged battery or total electrical section for instructions on shifting the transmission out of failure when the electric parking brake (EPB) is en- PARK so that the vehicle can be moved. gaged, will need a wheel dolly or jack to raise the rear wheels off the ground when moving the vehicle onto a CAUTION!
Page 666 664 WHAT TO DO IN EMERGENCIES If flatbed equipment is not available, this vehicle must Acceptable methods are to tow the vehicle on a flatbed, towed with the front wheels OFF the ground (using a or with one end of vehicle raised and the opposite end on towing dolly, or wheel lift equipment with the front a towing dolly.
Page 667 WHAT TO DO IN EMERGENCIES 665 • Ensure that the Electric Park Brake is released, and 4x4 Models With 2–Speed Power Transfer Unit remains released, while being towed. The manufacturer recommends towing with all four wheels OFF the ground. Refer to “Recreational Towing” in “Starting and Operat- ing”...
Page 668: System (Ears)
666 WHAT TO DO IN EMERGENCIES ENHANCED ACCIDENT RESPONSE SYSTEM EVENT DATA RECORDER (EDR) (EARS) This vehicle is equipped with an Event Data Recorder This vehicle is equipped with an Enhanced Accident (EDR). The main purpose of an EDR is to record, in Response System.
Page 669 MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 2.4L ..669 MAINTENANCE PROCEDURES ...675 ▫ Engine Oil ......676 ENGINE COMPARTMENT —...
Page 670 668 MAINTAINING YOUR VEHICLE ▫ Exhaust System ..... .698 ▫ Front Turn Signals And Front Side Marker Lamps ......737 ▫...
Page 671: Engine Compartment - 2.4L
MAINTAINING YOUR VEHICLE 669 ENGINE COMPARTMENT — 2.4L 1 — Air Cleaner Filter 5 — Power Distribution Center (Fuses) 2 — Engine Coolant Pressure Cap 6 — Battery 3 — Oil Fill Cap 7 — Washer Fluid Reservoir 4 — Brake Fluid Reservoir 8 —...
Page 672: Engine Compartment - 3.2L
670 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.2L 1 — Engine Coolant Reservoir 5 — Washer Fluid Reservoir 2 — Engine Oil Filter Access Cover 6 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 7 — Engine Oil Fill 4 —...
Page 673: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 671 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated Onboard • Prolonged driving with the MIL on could cause Diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 674: Loose Fuel Filler Cap Message
672 MAINTAINING YOUR VEHICLE access this information to assist with the diagnosis and For further information, refer to “Privacy Practices — If service of your vehicle and emissions system. Equipped With Uconnect 8.4 Radio” and “Uconnect CyberSecurity” in “All About Uconnect Access” in your WARNING! Owner’s Manual Radio Supplement and “Cybersecurity”...
Page 675: Emissions Inspection And Maintenance Programs
MAINTAINING YOUR VEHICLE 673 EMISSIONS INSPECTION AND MAINTENANCE Your vehicle has a simple ignition actuated test, which PROGRAMS you can use prior to going to the test station. To check if your vehicle’s OBD II system is ready, you must do the In some localities, it may be a legal requirement to pass following: an inspection of your vehicle’s emissions control system.
Page 676: Replacement Parts
674 MAINTAINING YOUR VEHICLE the ignition or start the engine. This means that your before going to the I/M station. The I/M station can fail vehicle’s OBD II system is not ready and you should your vehicle because the MIL is on with the engine not proceed to the I/M station.
Page 677: Maintenance Procedures
MAINTAINING YOUR VEHICLE 675 NOTE: Intentional tampering with emissions control Besides those maintenance items specified in the fixed systems may void your warranty and could result in civil “Maintenance Schedule”, there are other components penalties being assessed against you. which may require servicing or replacement in the future. WARNING! CAUTION! •...
Page 678: Engine Oil
676 MAINTAINING YOUR VEHICLE There are three possible dipstick types, CAUTION! (Continued) • Crosshatched zone. transmission or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty. • Crosshatched zone marked SAFE. If a flush is needed because of component malfunc- •...
Page 679 MAINTAINING YOUR VEHICLE 677 Change Engine Oil American Petroleum Institute (API) Engine Oil Identification Symbol The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further informa- This symbol means that the oil has tion.
Page 680 678 MAINTAINING YOUR VEHICLE Engine Oil Viscosity (SAE Grade) — 2.4L Engine and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your MOPAR SAE 0W-20 engine oil approved to FCA Material engine. For information on engine oil filler cap location, Standard MS-6395 such as Pennzoil, Shell Helix or refer to “Engine Compartment”...
Page 681: Engine Oil Filter
MAINTAINING YOUR VEHICLE 679 Materials Added To Engine Oil Engine Oil Filter Selection The manufacturer strongly recommends against the ad- This manufacturer’s engines have a full-flow type dispos- dition of any additives (other than leak detection dyes) to able oil filter. Use a filter of this type for replacement. The the engine oil.
Page 682 680 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Selection WARNING! The quality of replacement engine air cleaner filters The air induction system (air cleaner, hoses, etc.) can varies considerably. Only high quality filters should be provide a measure of protection in the case of engine used to assure most efficient service.
Page 683 MAINTAINING YOUR VEHICLE 681 Engine Air Cleaner Filter Removal 2. Push in on the quick connect clip with your thumb and remove by pulling hose (If Equipped) away from 1. Remove the screws from the air cleaner cover. air cleaner filter cover. Air Cleaner Filter Cover Air Cleaner Air Hose —...
Page 684 682 MAINTAINING YOUR VEHICLE 3. Lift the air cleaner cover to access the air cleaner filter. 4. Remove the air cleaner filter element from the housing assembly. Open Air Cleaner Filter Assembly Air Cleaner Filter 1 — Air Cleaner Cover 1 —...
Page 685: Accessory Drive Belt Inspection
MAINTAINING YOUR VEHICLE 683 Engine Air Cleaner Filter Installation WARNING! (Continued) NOTE: Inspect and clean the housing if dirt or debris is • When working near the radiator cooling fan, dis- present before replacing the air filter element. connect the fan motor lead. The fan is temperature controlled and can start at any time regardless of 1.
Page 686 684 MAINTAINING YOUR VEHICLE • Rib or belt wear normal. Any belt with cracks running along a rib must be replaced. Also have the belt replaced if it has excessive • Longitudinal belt cracking (cracks between two ribs) wear, frayed cords or severe glazing. •...
Page 687: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 685 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. an output greater than 12 Volts. Do not allow cable You will never have to add water, nor is periodic main- clamps to touch each other. tenance required.
Page 688: Air Conditioner Maintenance
686 MAINTAINING YOUR VEHICLE CAUTION! (Continued) WARNING! • If a “fast charger” is used while the battery is in the • Use only refrigerants and compressor lubricants vehicle, disconnect both vehicle battery cables be- approved by the manufacturer for your air condi- fore connecting the charger to the battery.
Page 689 MAINTAINING YOUR VEHICLE 687 Refrigerant Recovery And Recycling R1234yf — If CAUTION! Equipped Do not use chemical flushes in your air conditioning R-1234yf Air Conditioning Refrigerant is a hydrofluoole- system as the chemicals can damage your air condi- fine HFO that is endorsed by the Environmental Protec- tioning components.
Page 690 688 MAINTAINING YOUR VEHICLE Air Conditioning Filter Replacement (A/C Air Filter) WARNING! Do not remove the A/C air filter while the vehicle is running, or while the ignition is in the ACC or ON/RUN mode. With the A/C air filter removed and the blower operating, the blower can contact hands and may propel dirt and debris into your eyes, resulting in personal injury.
Page 691 MAINTAINING YOUR VEHICLE 689 Hush Panel Air Filter Cover Location 4. Remove the filter door by pushing down the tab on the 5. Remove the A/C air filter by pulling it straight out of top of the door to release the cover then rotate the door the housing.
Page 692: Body Lubrication
690 MAINTAINING YOUR VEHICLE CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 7. Install the passenger side hush panel under the dash panel and console closeout.
Page 693: Windshield Wiper Blades
MAINTAINING YOUR VEHICLE 691 the application of any lubricant, the parts concerned Operation of the wipers on dry glass for long periods should be wiped clean to remove dust and grit; after may cause deterioration of the wiper blades. Always use lubricating excess oil and grease should be removed.
Page 694 692 MAINTAINING YOUR VEHICLE • Foreign Material • Hardening Or Cracking • Deformation Or Fatigue If a wiper blade or wiper arm is damaged, replace the affected wiper arm or blade with a new unit. Do not attempt to repair a wiper arm or blade that is damaged. Front Wiper Blade Removal/Installation CAUTION! Do not allow the wiper arm to spring back against...
Page 695 MAINTAINING YOUR VEHICLE 693 holding the wiper arm with one hand, slide the wiper 3. With the wiper blade disengaged, remove the wiper blade down towards the base of the wiper arm. blade from the wiper arm by holding the wiper arm with one hand and separating the wiper blade from the wiper arm with the other hand (move the wiper blade toward the right side of the vehicle to separate...
Page 696 694 MAINTAINING YOUR VEHICLE 4. Gently lower the wiper arm onto the glass. Installing The Front Wipers 1. Lift the wiper arm off of the glass, until the wiper arm is in the full up position. 2. Position the wiper blade near the hook on the tip of the wiper arm with the wiper release tab open and the blade side of the wiper facing up and away from the windshield.
Page 697 MAINTAINING YOUR VEHICLE 695 Rear Wiper Blade Removal/Installation 1. Lift the rear wiper arm pivot cap away from the glass to allow the rear wiper blade to be raised off of the glass. NOTE: The rear wiper arm cannot be fully raised off the glass unless the wiper arm pivot cap is unsnapped first.
Page 698 696 MAINTAINING YOUR VEHICLE 2. Lift the rear wiper arm fully off the glass. 3. To remove the wiper blade from the wiper arm, grasp the bottom end of the wiper blade nearest to wiper arm with your right hand. With your left hand hold the wiper arm as you pull the wiper blade away from the wiper arm past its stop far enough to unsnap the wiper blade pivot pin from the receptacle on the end...
Page 699 MAINTAINING YOUR VEHICLE 697 Installing The Rear Wiper 1. Lift the rear wiper arm pivot cap away from the glass to allow the rear wiper blade to be raised off of the glass. NOTE: The rear wiper arm cannot be fully raised off the glass unless the wiper arm pivot cap is unsnapped first.
Page 700: Adding Washer Fluid
698 MAINTAINING YOUR VEHICLE Adding Washer Fluid WARNING! The windshield and rear window washers share the same Commercially available windshield washer solvents fluid reservoir. The fluid reservoir is located in the front are flammable. They could ignite and burn you. Care of the engine compartment.
Page 701 MAINTAINING YOUR VEHICLE 699 exhaust system inspected each time the vehicle is raised CAUTION! for lubrication or oil change. Replace as required. • The catalytic converter requires the use of un- WARNING! leaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control •...
Page 702 700 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 703: Cooling System
MAINTAINING YOUR VEHICLE 701 Cooling System for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically WARNING! down the face of the condenser. Check the engine cooling system hoses for brittle rubber, You or others can be badly burned by hot engine cracking, tears, cuts, and tightness of the connection at coolant (antifreeze) or steam from your radiator.
Page 704 702 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush And Refill CAUTION! NOTE: Some vehicles require special tools to add coolant • Mixing of engine coolant (antifreeze) other than properly. Failure to fill these systems properly could lead specified Organic Additive Technology (OAT) en- to severe internal engine damage.
Page 705 MAINTAINING YOUR VEHICLE 703 Please review these recommendations for using Organic CAUTION! (Continued) Additive Technology (OAT) engine coolant (antifreeze) rust inhibitors or antirust products, as they may not that meets the requirements of FCA Material Standard be compatible with the engine coolant and may MS.90032.
Page 706 704 MAINTAINING YOUR VEHICLE (antifreeze) solution. The use of lower quality water have a authorized dealer drain, flush, and refill with will reduce the amount of corrosion protection in the OAT coolant (conforming to MS.90032) as soon as engine cooling system. possible.
Page 707 MAINTAINING YOUR VEHICLE 705 Coolant Level WARNING! (Continued) The coolant bottle provides a quick visual method for build up in the cooling system. To prevent scalding determining that the coolant level is adequate. With the or injury, do not remove the pressure cap while the engine OFF and cold, the level of the engine coolant system is hot or under pressure.
Page 708 706 MAINTAINING YOUR VEHICLE • If frequent engine coolant (antifreeze) additions are Points To Remember required, the cooling system should be pressure tested NOTE: When the vehicle is stopped after a few miles/ for leaks. kilometers of operation, you may observe vapor coming •...
Page 709: Brake System
MAINTAINING YOUR VEHICLE 707 result in unsatisfactory engine coolant (antifreeze) Brake Master Cylinder performance, poor gas mileage, and increased emis- The fluid in the master cylinder should be checked when sions. performing under hood services or immediately if the “Brake Warning Light” is illuminated. Brake System In order to assure brake system performance, all brake Be sure to clean the top of the master cylinder area before...
Page 710: Automatic Transmission
708 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) cause it to boil unexpectedly during hard or pro- • Use only manufacturer’s recommended brake longed braking, resulting in sudden brake failure. fluid. Refer to “Fluids, Lubricants, And Genuine This could result in a collision. Parts”...
Page 711 MAINTAINING YOUR VEHICLE 709 only the manufacturer’s specified transmission fluid. Special Additives Refer to “Fluids, Lubricants, And Genuine Parts” in this The manufacturer strongly recommends against using section for fluid specifications. It is important to maintain any special additives in the transmission. Automatic the transmission fluid at the correct level using the Transmission Fluid (ATF) is an engineered product and recommended fluid.
Page 712: Appearance Care And Protection From Corrosion
710 MAINTAINING YOUR VEHICLE Routine fluid level checks are not required, therefore the Routine fluid and filter changes are not required. How- transmission has no dipstick. Your authorized dealer can ever, change the fluid and filter if the fluid becomes check your transmission fluid level using special service contaminated (with water, etc.), or if the transmission is tools.
Page 713 MAINTAINING YOUR VEHICLE 711 The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your ve- resistance built into your vehicle. hicle in the shade using MOPAR Car Wash, or a mild car wash soap, and rinse the panels completely with What Causes Corrosion? clear water.
Page 714 712 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder that will •...
Page 715 MAINTAINING YOUR VEHICLE 713 Wheel And Wheel Trim Care CAUTION! • All wheels and wheel trim, especially aluminum and Do not use scouring pads, steel wool, a bristle brush, chrome plated wheels, should be cleaned regularly or metal polishes. Do not use oven cleaner. These with a mild soap and water to prevent corrosion.
Page 716 714 MAINTAINING YOUR VEHICLE • For tough stains, apply MOPAR Total Clean, or a mild can act as an abrasive and damage the leather upholstery soap solution to a clean, damp cloth and remove stain. and should be removed promptly with a damp cloth. Use a fresh, damp towel to remove soap residue.
Page 717 MAINTAINING YOUR VEHICLE 715 Cleaning Headlights CAUTION! Your vehicle is equipped with plastic headlights and fog Direct contact of air fresheners, insect repellents, lights that are lighter and less susceptible to stone break- suntan lotions, or hand sanitizers to the plastic, age than glass headlights.
Page 718 716 MAINTAINING YOUR VEHICLE cleaner. Use caution when cleaning the inside rear win- Seat Belt Maintenance dow equipped with electric defrosters or windows Do not bleach, dye or clean the belts with chemical equipped with radio antennas. Do not use scrapers or solvents or abrasive cleaners.
Page 719: Fuses
MAINTAINING YOUR VEHICLE 717 WARNING! (Continued) WARNING! (Continued) • Before replacing a fuse, make sure that the ignition assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn web- is off and that all the other services are switched off bing, etc.).
Page 720: Power Distribution Center
718 MAINTAINING YOUR VEHICLE Power Distribution Center The Power Distribution Center is located in the engine compartment near the battery. This center contains car- tridge fuses, mini-fuses and relays. A label that identifies each component is printed on the inside of the cover. Power Distribution Center...
Page 721 MAINTAINING YOUR VEHICLE 719 Cavity Blade Fuse Cartridge Fuse Description – – Not Used 15 Amp Blue – Powertrain Control Mod- ule - PCM (Diesel Only) 25 Amp Clear – Engine Control Module (ECM)/Fuel Injection – – Not Used 20 Amp Yellow –...
Page 722 720 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Drivetrain Control Mod- ule (DTCM) / Power Take-Off Unit (PTU) / Brake System Module (BSM) - If Equipped/ Brake Pedal Switch/Back Up Switch (Diesel Only) – –...
Page 723 MAINTAINING YOUR VEHICLE 721 Cavity Blade Fuse Cartridge Fuse Description 70 Amp Tan – Body Controller Module (BCM) - Feed 2 50 Amp Red – Voltage Stability Module (VSM) Feed #2 - If Equipped With Stop/Start Engine Option 20 Amp Yellow –...
Page 724 722 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description – – Not Used 10 Amp Red – Engine Control Module (ECM)/(EPS)/(PCM) – – Not Used – – Not Used – – Not Used – – Not Used – – Not Used –...
Page 725 MAINTAINING YOUR VEHICLE 723 Cavity Blade Fuse Cartridge Fuse Description – 30 Amp Pink Headlamp Washer Pump - If Equipped – 60 Amp Yellow Body Controller Module (BCM) - Feed 1 – 50 Amp Red Voltage Stability Module - Feed 1 - If Equipped With Stop/Start Engine Option –...
Page 726 724 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description – 30 Amp Pink Driver Door Module - If Equipped – 30 Amp Pink Power Inverter (115V A/C) - If Equipped – 30 Amp Pink Power Liftgate - If Equipped –...
Page 727 MAINTAINING YOUR VEHICLE 725 Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Blind Spot Sensors / Compass / Rearview Camera / Trunk Lamp With Flashlamp Charger - If Equipped 15 Amp Blue – Ignition Node Module (IGNM)/KIN/RF Hub/ Electric Steering Column Lock (ESL) 20 Amp Yellow...
Page 728 726 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description 20 Amp Yellow – Power Outlet - Center Console 20 Amp Yellow – Trailer Tow Lights Right - If Equipped 20 Amp Yellow – Windshield de-icer - If Equipped 20 Amp Yellow –...
Page 729 MAINTAINING YOUR VEHICLE 727 Cavity Blade Fuse Cartridge Fuse Description 15 Amp Blue – HVAC (ECC) / Instru- ment Panel Cluster (IPC) 10 Amp Red – In Vehicle Temperature Sensor / Humidity Sen- sor / Driver Assist Sys- tem Module (DASM) / Park Assist (PAM) - If Not Equipped With Stop/ Start Option...
Page 730 728 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Power Transfer Unit Switch (TSBM) - If Equipped With Diesel Engine 5 Amp Tan – Intelligent Battery Sensor If Equipped With Stop/ Start Engine Option 20 Amp Yellow –...
Page 731 MAINTAINING YOUR VEHICLE 729 Cavity Blade Fuse Cartridge Fuse Description 20 Amp Yellow – Cigar Lighter - If Equipped 20 Amp Yellow – Rear Differential Module (RDM) - If Equipped 10 Amp Red – Fuel Door Release/Brake Pedal Switch 10 Amp Red –...
Page 732 730 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description – 20 Amp Blue Engine Controller Module (Gas) – 30 Amp Pink Electric Park Brake (EPB) - Left – – Not Used 20 Amp Yellow – Horns - If Equipped With Stop/Start Engine Option F87A 20 Amp Yellow...
Page 733 MAINTAINING YOUR VEHICLE 731 Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Headlamp Leveling - If Equipped – – Not Used 20 Amp Yellow – Power Outlet Rear - If Equipped - Customer Se- lectable – – Not Used –...
Page 734 732 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Electrochromatic Mirror / Rain Sensor / Sunroof - If Equipped / Passenger Window Switch / Power Outlet Console / Digital TV (Japan Only) 10 Amp Red –...
Page 735: Interior Fuses
MAINTAINING YOUR VEHICLE 733 Interior Fuses The interior fuse panel is located on the Body Control Module (BCM) in the passenger compartment on the left side dash panel under the instrument panel. Cavity Blade Fuse Description 15 Amp Blue Low Beam Left 10 Amp Red Interior Lighting 10 Amp Red...
Page 736: Vehicle Storage
734 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Description 10 Amp Red Door Locks – Driver Unlock 7.5 Amp Brown Fog Lamp Front Left 7.5 Amp Brown Fog Lamp Front Right 10 Amp Red Low Beam Right • Anytime you store your vehicle, or keep it out of VEHICLE STORAGE service (i.e.
Page 737: Replacement Bulbs
MAINTAINING YOUR VEHICLE 735 REPLACEMENT BULBS Interior Bulbs Bulb Number Cargo Lamp TL212–2 Overhead Console Lamp PLW214–2A Reading Lamp WL212–2 Exterior Bulbs Bulb Number Low Beam/High Beam (Bi-Halogen) Headlamps HIR2 Low Beam/High Beam (Bi-Xenon) Headlamps D3S (Serviced at an Authorized Dealer) Front Park/Daytime Running Lamps LED (Serviced at an Authorized Dealer) Front Turn Signal Lamps...
Page 738: Bulb Replacement
736 MAINTAINING YOUR VEHICLE Bulb Number Back-Up Lamps W16W or 921 License Plate Lamp yourself. If an HID headlamp light source fails, take your BULB REPLACEMENT vehicle to an authorized dealer for service. NOTE: Lens fogging can occur under certain atmo- spheric conditions.
Page 739: Front Turn Signals And Front Side Marker Lamps
MAINTAINING YOUR VEHICLE 737 Bi-Halogen Headlamps 6. Install the bulb and connector assembly into the headlamp housing and rotate clockwise to lock it in 1. Remove the 3 hex head screws from the wheel liner. place. 2. Pull the exterior edge of the liner towards the tire to 7.
Page 740: Front Fog Lamp
738 MAINTAINING YOUR VEHICLE 4. Install the bulb and socket assembly into the housing, CAUTION! and rotate the socket clockwise to lock it in place. Do not touch the new bulb with your fingers. Oil 5. Re-install air cleaner filter housing if removed. contamination will severely shorten bulb life.
Page 741: Bodyside Mounted Back-Up Lamp
MAINTAINING YOUR VEHICLE 739 4. Disconnect the wire harness from the bulb. 3. Grasp the tail lamp and pull firmly rearward to disengage the lamp from the vehicle. CAUTION! 4. Disconnect the electrical connector. Do not touch the new bulb with your fingers. Oil 5.
Page 742: License Plate Lamp
740 MAINTAINING YOUR VEHICLE 3. Once the trim is loose, pull it back exposing the trim License Plate Lamp panel. 1. Using a small screwdriver, press inward the locking 4. Using a fiber stick or flat blade screw driver, open the tab on the side of the lamp assembly and pull down on trim panel exposing the back of the liftgate lamp.
Page 743: Fluid Capacities
MAINTAINING YOUR VEHICLE 741 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 2.4L and 3.2L Engines 15.8 Gallons 60 Liters Engine Oil With Filter 2.4 Liter Engine (SAE 0W-20, API 5.5 Quarts 5.2 Liters Certified) 3.2 Liter Engine (SAE 5W-20, API 6 Quarts 5.6 Liters Certified) Cooling System*...
Page 744: Fluids, Lubricants, And Genuine Parts
742 MAINTAINING YOUR VEHICLE U.S. Metric 3.2 Liter Engine (MOPAR 10 Quarts 9.5 Liters Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula) * Includes heater and coolant re- covery bottle filled to MAX level. FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the...
Page 745 MAINTAINING YOUR VEHICLE 743 Component Fluid, Lubricant, or Genuine Part Engine Oil – 3.2L Engine We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. Engine Oil Filter We recommend you use a MOPAR Engine Oil Filter.
Page 746 744 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 747: Chassis
MAINTAINING YOUR VEHICLE 745 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only MOPAR ZF 8&9 Speed ATF Automatic Trans- mission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake Master Cylinder We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703 should be used.
Page 749 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart.....750 MAINTENANCE SCHEDULE ... . .748...
Page 750 748 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE than your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle Your vehicle is equipped with an automatic oil change Information Center (EVIC)” or “Driver Information Dis- indicator system. The oil change indicator system will play (DID)”...
Page 751 MAINTENANCE SCHEDULES 749 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil • Check engine oil level. Change Indicator System: • Change oil and filter • Check windshield washer fluid level. • Rotate the tires. Rotate at the first sign of irregu- •...
Page 752 750 MAINTENANCE SCHEDULES Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive belt, tensioner, idler pulley, and replace if necessary.
Page 753 MAINTENANCE SCHEDULES 751 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Replace spark plugs ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Inspect and replace PCV valve if necessary. ** The spark plug change interval is mileage based only, yearly intervals do not apply.
Page 754 752 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 755 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .755 Impaired (TDD/TTY).
Page 756 754 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .762 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....761 ▫...
Page 757: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 755 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 758: Fca Us Llc Customer Center
756 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized FCA US LLC Customer Center dealer service manager first.
Page 759: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 757 In Mexico Contact Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) Av. Prolongacion Paseo de la Reforma, 1240 To assist customers who have hearing difficulties, the Sante Fe C.P. 05109 manufacturer has installed special TDD (Telecommuni- Mexico, D.
Page 760 758 IF YOU NEED CONSUMER ASSISTANCE Warranty expires. The manufacturer stands behind only We appreciate that you have made a major investment the manufacturer’s service contracts. If you purchased a when you purchased the vehicle. An authorized dealer manufacturer’s service contract, you will receive Plan has also made a major investment in facilities, tools, and Provisions and an Owner Identification Card in the mail training to assure that you are absolutely delighted with...
Page 761: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 759 WARRANTY INFORMATION If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in See the Warranty Information Booklet, located on the a group of vehicles, it may order a recall and remedy DVD, for the terms and provisions of FCA US LLC campaign.
Page 762: In Canada
760 IF YOU NEED CONSUMER ASSISTANCE In Canada Service Manuals If you believe that your vehicle has a safety defect, you These comprehensive Service Manuals provide the infor- should contact the Customer Service Department imme- mation that students and professional technicians need in diately.
Page 763: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 761 Owner’s Manuals DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES These Owner’s Manuals have been prepared with the The following tire grading categories were established by assistance of service and engineering specialists to ac- the National Highway Traffic Safety Administration. The quaint you with specific FCA US LLC vehicles.
Page 764: Traction Grades
762 IF YOU NEED CONSUMER ASSISTANCE Treadwear Traction Grades The Treadwear grade is a comparative rating, based on The Traction grades, from highest to lowest, are AA, A, B, the wear rate of the tire when tested under controlled and C. These grades represent the tire’s ability to stop on conditions on a specified government test course.
Page 765: Temperature Grades
IF YOU NEED CONSUMER ASSISTANCE 763 Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, The temperature grade for this tire is established for representing the tire’s resistance to the generation of heat a tire that is properly inflated and not overloaded. and its ability to dissipate heat, when tested under Excessive speed, under-inflation, or excessive load- controlled conditions on a specified indoor laboratory...
Page 767 INDEX...
Page 768 766 INDEX About Your Brakes ......529 Air Bag Deployment ......68 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 769 INDEX 767 Alterations/Modifications, Vehicle ....8 Fluid Type ......708, 745 Antifreeze (Engine Coolant).
Page 770 768 INDEX Brake Fluid ......745 Cargo Compartment ..... . .312 Brakes .
Page 771 INDEX 769 Installing Child Restraints Using The Vehicle Contract, Service ......757 Seat Belt ......108 Coolant Pressure Cap (Radiator Cap) .
Page 772 770 INDEX Data Recorder, Event ..... . .91 Remote Keyless Entry (RKE) ....35 Daytime Brightness, Interior Lights.
Page 773 INDEX 771 Traction Control System ....536 Coolant (Antifreeze) .....742 Electronic Range Select (ERS) .
Page 774 772 INDEX Event Data Recorder ......91 Maintenance ......594 Exhaust Gas Caution.
Page 775 INDEX 773 Additives ......589 Gasoline, Reformulated .....587 Clean Air .
Page 776 774 INDEX Switch .......167 Ignition Time Delay ......169 Key .
Page 777 INDEX 775 Jump Starting ......653 LaneSense ......220 Lap/Shoulder Belts.
Page 778 776 INDEX Daytime Running ..... . .170 Low Fuel ......347 Dimmer Switch, Headlight .
Page 779 INDEX 777 Load Shed Malfunction Indicator Light (Check Engine) . . .340, 673 Battery Saver Mode ....372, 384 Manual, Service ......760 Battery Saver On .
Page 780 778 INDEX Multi-Function Control Lever ....172 Viscosity ......678, 741 Oil Filter, Change .
Page 781 INDEX 779 Placard, Tire And Loading Information ..558 Radio Operation ......429 Power Radio Remote Controls .
Page 782 780 INDEX Refrigerant ......687 Replacement Parts......674 Release, Hood.
Page 783 INDEX 781 Automatic Locking Retractor (ALR) ...65 Operating Instructions ....60 Energy Management Feature ....65 Pregnant Women .
Page 784 782 INDEX Selec-Terrain ......514 Side View Mirror Adjustment....135 Selection Of Coolant (Antifreeze) .
Page 785 INDEX 783 Steering Temperature Control, Automatic (ATC)..442, 450 Column Controls ..... . .172 Tie Down Hooks, Cargo ....312 Tilt Column .
Page 786 784 INDEX Pressure Monitor System (TPMS) ... .578 Disabled Vehicle ......661 Pressure Warning Light .
Page 787 INDEX 785 Automatic ......495, 708 Siri Eyes Free ......475 Fluid .
Page 788 786 INDEX Viscosity, Engine Oil ..... . .678 Windshield Defroster..... . .117 Voice Recognition System (VR) .
Page 789 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 790 STICK WITH THE SPECIALISTS ® 16KL74-126-AD Fourth Edition ©2015 FCA US LLC. All Rights Reserved. Printed in U.S.A. Jeep is a registered trademark of FCA US LLC.

Save PDF