Crankshaft Position Sensor - Subaru Legacy 2003 Service Manual

5. Crankshaft Position Sensor

A: REMOVAL
1) Disconnect battery ground cable.
2) Remove bolt which install crankshaft position
sensor to cylinder block.
3) Remove crankshaft position sensor, and discon-
nect connector from it.
CRANKSHAFT POSITION SENSOR
FU-00009
FU-00515
FU-00057
FU(H4SOw/oOBD)-27
FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
T: 6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
T
FU-00058