Crankshaft Position Sensor - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 31 ページ ２０１２年１月１７日 火曜日 午後３時４８分

5. Crankshaft Position Sensor

A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the bolt which installs crankshaft posi-
tion sensor to cylinder block.
3) Remove the crankshaft position sensor, and
then disconnect the connector from it.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
T: 6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Crankshaft Position Sensor
FU-00009
FU-00056
FU-00057
T
FU-00058
FU(H4DOTC)-31
FUEL INJECTION (FUEL SYSTEMS)