Throttle Body - Subaru forester 2001 Service Manual

Fuel Injection (Fuel Systems)

2. Throttle Body

A: REMOVAL
S185010A18
1) Disconnect battery ground cable.
2) Remove intercooler.
TURBO)-10, REMOVAL, Intercooler.>
3) Disconnect connector from throttle position
sensor (A) and idle air control solenoid valve (B)
and pressure sensor (C).
4) Disconnect accelerator cable.
THROTTLE BODY
S185010
G6M0095
<Ref. to IN(DOHC
EN0782
H2M1890
FU(DOHC TURBO)-14
5) Disconnect engine coolant hoses from throttle
body.
6) Remove bolts which secure throttle body to
intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use new gaskets.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
EN0784
S185010A11
EN0785