VERIFY TROUBLESHOOTING OF DTC P0335
COMPLETED
Make sure to reconnect all disconnected
•
connectors.
9
Clear the DTC from the PCM memory
•
using the WDS or equivalent.
Start the engine and run the engine for 5 s
•
or more.
Is the same DTC present?
•
VERIFY AFTER REPAIR PROCEDURE
Perform the "AFTER REPAIR
•
PROCEDURE".
10
(See AFTER REPAIR PROCEDURE .)
Are any DTCs present?
•
Replace the PCM, then go to the next step.
Yes
(See PCM REMOVAL/INSTALLATION .)
No Go to the next step.
Go to the applicable DTC inspection.
Yes
(See DTC TABLE .)
No DTC troubleshooting completed.
(w)
Engine Diagnostics & Control
Page 170