DTC P0562
DTC P0562
DETECTION
CONDITION
POSSIBLE CAUSE
System voltage low (KAM)
The PCM monitors the battery voltage when the engine is running. If the voltage
•
is less than 2.5 V , the PCM determines that the system voltage is low.
Diagnostic support note
This is a continuous monitor (CCM).
•
The MIL illuminates if the PCM detects the above malfunction condition in the
•
first drive cycle.
PENDING CODE is available if the PCM detects the above malfunction
•
condition.
FREEZE FRAME DATA is available.
•
The DTC is stored in the PCM memory.
•
Battery malfunction
•
Connector or terminal malfunction
•
Open circuit in wiring harness between battery positive terminal and PCM
•
terminal 5J
Short to GND in wiring harness between battery positive terminal and PCM
•
terminal 5J
Meltdown fuse
•
PCM malfunction
•
(w)
Engine Diagnostics & Control
Page 245