Mazda RX-8 Manual page 738

Diagnostic procedure
STEP INSPECTION
VERIFY FREEZE FRAME DATA HAS BEEN
RECORDED
1
Has FREEZE FRAME DATA been
•
recorded?
VERIFY RELATED REPAIR INFORMATION
AVAILABILITY
2 Verify related Service Bulletins and/or on-
•
line repair information availability.
Is any related repair information available?
•
VERIFY RELATED PENDING CODE OR
STORED DTC
Turn the ignition switch off, then to the ON
•
3
position (Engine off).
Verify the related PENDING CODE or
•
stored DTCs.
Are other DTCs present?
•
IDENTIFY TRIGGER DTC FOR FREEZE
FRAME DATA
4
Is DTC P0410 on FREEZE FRAME
•
DATA?
INSPECT AIR SYSTEM OPERATION
Perform the "AIR System Inspection".
•
5
(See Secondary Air Injection (AIR) System
Inspection .)
Is there any malfunction?
•
VERIFY TROUBLESHOOTING OF DTC P0410
6
COMPLETED
ACTION
Yes Go to the next step.
Record the FREEZE FRAME DATA on the
No
repair order, then go to the next step.
Perform repair or diagnosis according to the
available repair information.
Yes
If the vehicle is not repaired, go to the
•
next step.
No Go to the next step.
Go to the appropriate DTC inspection.
Yes
(See DTC TABLE .)
No Go to the next step.
Yes Go to the next step.
Go to the FREEZE FRAME DATA DTC
inspection.
No
(See DTC TABLE .)
Repair or replace the malfunctioning part
according to the inspection results.
Yes
Then go to the next step.
No Go to the next step.
Replace the PCM, then go to the next step.
Yes
(See PCM REMOVAL/INSTALLATION .)
(w) Engine Diagnostics & Control
Page 175