Subaru Impreza 2003 Service Manual page 3224

FRONT FENDER PANEL
EXTERIOR BODY PANELS
3. Front Fender Panel
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the side sill spoilers. <Ref. to EI-36,
Side Sill Spoiler.> (Model with side sill spoiler)
3) Remove the front bumper face. <Ref. to EI-22,
REMOVAL, Front Bumper.>
4) Remove the mud guard. <Ref. to EI-31, RE-
MOVAL, Mud Guard.>
5) Loosen the bolts to remove front fender panel.
EB-00125
B: INSTALLATION
1) Install in the reverse order of removal.
2) When the front fender panel is installed, clear-
ance between front fender panel and front hood
panel must be equal.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.5 ft-lb)
EB-14