Subaru Impreza 2003 Service Manual page 3229

C: ADJUSTMENT
1) Open the rear door, and then loosen the door-
side bolts of upper and lower hinges to align the po-
sition of rear door panel longitudinally and vertical-
ly.
2) Loosen the screw (A), and then tap striker (B)
using plastic hammer to adjust striker to align the
position of rear door panel laterally at the rear end.
CAUTION:
Do not use an impact wrench. The welding area
on the striker nut plate is easily broken.
(A)
REAR DOOR PANEL
EB-00015
(B)
EB-00017
EB-19
EXTERIOR BODY PANELS