Subaru Impreza 2003 Service Manual page 3197

INSTRUMENT PANEL ASSEMBLY
EXTERIOR/INTERIOR TRIM
12) Check that all the harness is disconnected, and
then remove the instrument panel from vehicle.
NOTE:
• Put alignment marks as necessary, in order to fa-
cilitate the reassembly.
• When storing the removed instrument panel,
place it standing up on the floor.
EI-00495
B: INSTALLATION
CAUTION:
• Be careful not to snag the harness.
• Carry out installation checking that the har-
ness is connected correctly.
• When setting the instrument panel into vehi-
cle, do not damage trim panels.
1) Install in the reverse order of removal.
NOTE:
When installing the instrument panel into position,
push the hook into grommet (A) on the body panel.
After tightening the bolts, recheck the installation.
(A)
EI-00496
EI-45