7. Clutch Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from clutch switch,
and then remove the switch. <Ref. to CL-42, DIS-
ASSEMBLY, Clutch Pedal.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the clutch switch resistance.
Switch
Pedal
Released
Clutch
Depressed
If NG, replace the clutch switch.
CLUTCH SWITCH
CC-00023
Terminal No.
Standard value
Less than 1 Ω
1 and 2
1 and 2
More than 1 MΩ
CC-9
CRUISE CONTROL SYSTEM