Table of Contents
Advertisement
[IN1 MASKING] L:
R:1920 T:
↓
[IN1 MASKING] L:
R:1920 T:
↓ ESC key: Returns to the previous screen
2. To set the input masking (the number of pixels) using commands:
@SNM: Set input masking
@GNM: Get input masking
7.3.9
Input automatic sizing [INPUT AUTO SIZING]
This function adjusts input signals optimally, and as a result the following settings will be initialized
automatically: "7.3.3 Aspect ratio control of input video [INPUT ASPECT]", "7.3.5 Overscan [INPUT
OVER SCAN]", "7.3.6 Input position [INPUT POSITION]", "7.3.7 Input size [INPUT SIZE]", and "7.3.8 Input
masking [INPUT MASKING]". It may not work if aspect ratios of the input signal and display device do not
match or depending on some settings.
1. To set the input automatic sizing using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
INPUT AUTO SIZING
↓ SET key
[IN1 AUTO SIZING]
SURE? = NO
↓To apply the setting: Select "YES" and press the "SET" key.
To return to the menu without any change: Select "NO" and press the "SET" key.
[OUTPUT TIMING]
INPUT AUTO SIZING
2. To set the input automatic sizing using commands:
@IAS: Input automatic sizing
7.3.10 Output position [OUTPUT POSITION]
You can set the display position of the output video by the pixel position of on the output screen.
You can set the position for each input channel in "7.3.6 Input position [INPUT POSITION]", in this menu you
can set the position for each output. Normally, set the position, size, and masking of each input in settings of
each input. If edges are cut off due to enlargement display in the display device or if you want to move output
video for all channels at a time, set the position for each output.
▪ Horizontal position: Changed in a unit of pixel [Default]: 0
▪ Vertical position: Changed in a unit of line [Default]: 0
keys: Set the top side masking of IN1.
0
0
B:1080
keys
keys : : Set the bottom side masking of IN1.
0
0
B:1080
Top
keys: Select "OUTPUT TIMING".
keys: Select "INPUT AUTO SIZING".
↑ ESC key: Returns to the previous screen without changing settings.
keys: Select "YES" or "NO".
keys: Select the desired input (IN1 toIN8).
For each input port/input signal
For each output (common to OUTA and OUTB)
64
MSD-804FD User's Guide
Advertisement
Table of Contents
