Display Power Key Pressing Duration; Hdbaset Input Power Supply - IDK MSD-6203 User Manual

9.18.5 DISPLAY POWER key pressing duration

Menu Top→OTHERS→DISP POW BUTTON ON
Setting value 0ms to 5000ms (by 10 ms) Default 0ms
You can set the pressing time of the target DISPLAY POWER key to prevent the sink device from being
powered off when the key is pressed accidentally.

9.18.6 HDBaseT input power supply

Menu Top→OTHERS→HDC POWER OUTPUT
Setting value ON, OFF [Default]
You can set the power supply function from the HDBaseT input connector.
"ON": Power will be supplied to an HDBaseT transmitter supporting PoH (IEEE802.3af).
Press the MENU/SET key to apply the setting.
Note:
If you connect a device that does not support PoH (IEEE802.3af) while HDC POWER OUTPUT is enabled,
the MSD and the connected device may be damaged.
MSD-62 Series User's Guide
149