Table of Contents
Advertisement
9.17.2
Buzzer
Menu
Top→OTHERS→BUZZER
Setting value ON [Default], OFF
You can enable / disable the buzzer function (sounding every time you press a front panel key).
9.17.3
Power saving
Menu
Top→OTHERS→POWER SAVE
Setting value ON [Default], OFF
If you select "ON" and no key function is operated for 30 seconds, the display brightness is reduced to
approximately 25%. When you operate any key, the luminance returns to 100%.
9.17.4
DISPLAY POWER key pressing time
Menu
Top→OTHERS→DISP POW BUTTON ON
Setting value 0ms to 5000ms (by 10ms) [Default] 0ms
You can set the pressing time of the target DISPLAY POWER key to prevent the sink device from being
powered off when the key is pressed accidentally.
9.17.5
HDBaseT input power supply
Menu
Top→OTHERS→HDC POWER OUTPUT
Setting value ON, OFF [Default]
You can set the power supply function from the HDBaseT input connector.
"ON": Power will be supplied to an HDBaseT transmitter supporting PoH (IEEE802.3af).
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Note:
If you connect a device that does not support PoH (IEEE802.3af) while HDC POWER OUTPUT is enabled,
the MSD and the connected device may be damaged.
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
125
Advertisement
Table of Contents
