Initialization - IDK MSD-6203 User Manual

8.9

Initialization

All settings will be reset to factory default values by powering on the MSD while pressing the "ESC" key.
Press and hold the "ESC" key until you hear a long beep sound.
Table 8.4 below, shows the Factory default values.
When settings are initialized from the WEB browser, they can be initialized without changing LAN settings.
Note that after returning to factory default, the previous setting values cannot be restored. Some menus can
be set for each input channel and output channel individually; see "[Table 8.18] Setting condition" for
details.
Menu
FRONT OPERATION
SWITCHING MODE
COMMAND/PRESET
[Table 8.5] Factory default
For ---
Default V&A
For ---
Default LOCK
MSD-62 Series User's Guide
Factory default See
P. 65
P. 65
45