Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
8.6
Initialization
All settings will be reset to factory default values by turning on the MSD while pressing the "ESC" key.
Press and hold the "ESC" key until you hear a long beep sound.
Table 8.4 below, shows the Factory default values.
When settings are initialized from the WEB browser, they can be initialized without changing LAN settings.
Note that after returning to factory default, the previous setting values cannot be restored. Some menus can
be set for each input channel and output channel individually; see "[Table 8.14] Setting condition" for
details.
Menu
SWITCHING MODE
OUTPUT TIMING
RESOLUTION
MONITOR ASPECT
INPUT ASPECT
ASPECT PROCESS
INPUT OVER SCAN
INPUT POSITION
INPUT SIZE
INPUT MASKING
INPUT AUTO SIZING
30
[Table 8.4] Factory default
For
---
Default
V&A
For
Each output channel
Default
AUTO-A
For
Each output channel
Default
RESOLUTION
For
Each input channel, each input signal
Default
AUTO-1
For
Each input channel, each input signal
Default
L-BOX / S-PANEL
For
Each input channel, each input signal
Default
105 % [NTSC / PAL / SDTV input]
100 % [HDTV / PC input]
For
Each input channel, each input signal
Default
H : 0
V : 0
For
Each input channel, each input signal
Default
H : Horizontal output resolution
V : Vertical output resolution
For
Each input channel, each input signal
Default
L : 0
T : 0
For
Each input channel, each input signal
Default
---
Factory default
R : Horizontal input size
B : Vertical input size
See
P.46
P.47
P.49
P.49
P.50
P.50
P.50
P.51
P.52
P.52
Advertisement
Table of Contents
