Table of Contents
Advertisement
7.14.3 Editing cross point
Menu
Top→PRESET MEMORY→EDIT CROSS POINT
Setting for
Each cross point memory
Setting value
Output channel
Video input channel
Audio input channel
Memory name
You can edit the settings of the cross point memory.
First, select the memory number and press the MENU/SET key, and then edit settings.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
■ Not controlling channel
"---": if you select "---" when setting input channel of V or A, it is set to "not control". Output with the setting will
not be switched.
Current input setting
OUT1 = Input channel1
OUT2 = Input channel2
Current setting of cross point memory1
OUT1 = Input channel3
OUT2 = Not control (---)
7.14.4 Loading all settings
Menu
Top→PRESET MEMORY→LOAD ALL SETTING
Setting value No.1 to No.8
You can load all settings saved in the preset memory.
Once you perform this operation, all settings related to video and audio I/O except for some environmental
settings will be updated. Operate this menu with great attention.
This menu is not displayed if setting is not saved in memory. Since no setting is saved in any memories by
factory default, this menu is not displayed.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Setting item
OUT1,OUT2
---,1 to 7,OFF
---,1 to 7,OFF
20 to 7D of ASCII code
Loading
[Fig. 7.21] Loading edited cross point memory
MSD-501/502/701/702 User's Guide
Setting value
Setting is not changed.
OUT1 = Input channel3
OUT2 = Input channel2
Input setting after loading cross point memory
【See: 7.14.5 Saving all settings】
Default
OUT1
---
---
20 (space)
85
Advertisement
Table of Contents
