Editing Cross Point; Recalling All Settings - IDK MSD-702UHD User Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.14.3

Editing cross point

Menu Top→PRESET MEMORY→EDIT CROSS POINT
Setting for Each cross point memory
Setting value [Table 9.30] Editing cross point item
Setting item
Output channel (OUT)
Video input channel (V)
Audio input channel (A)
Memory name (NAME)
*Setting input channels of video and audio for each output channel
You can edit the cross point memory setting.
First, select the memory number and press the MENU/SET key, and then edit the desired setting.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
■ Not controlling channel
If you select "---" when setting input channel of V or A, channels are not controlled.
Outputs that are set not to be controlled are not switched when cross point memory is loaded.
Current input setting
OUT1 = Input channel1
OUT2 = Input channel2
Current setting of cross point memory1
OUT1 = Input channel3
OUT2 = Not control (---)
9.14.4

Recalling all settings

Menu Top→PRESET MEMORY→LOAD ALL SETTING
Setting value No.1 to No.8
You can recall all settings saved in the preset memory.
Once you perform this operation, all settings related to video and audio I/O except for some environmental
settings will be updated. Operate this menu with great attention.
This menu is not displayed if setting is not saved in memory. Since no setting is saved in any memories by
factory default, this menu is not displayed.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
110
[Table 9.30] Editing cross point item
1 to 2
--- (Not control), 1 to 8, OFF
--- (Not control), 1 to 8, OFF
20 to 7D of ASCII code
Loading
OUT1 = Input channel3
OUT2 = Input channel2
Input setting after loading cross point memory
[Fig. 9.29] Loading edited cross point memory
Setting value
Setting is not changed.
Default
-*
---
---
20 (space)