Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.7.7 Loading device data
Menu
Top→INPUT TIMING→LOAD
Setting for
Each input channel, each input signal
Device data whose input timing is registered can be loaded according to the input signal.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
If there is no input signal on the input channel it shows "NOT AVAILABLE NOW" on the front VFD screen.
Input signal
Analog
Registered device data will be loaded.
Use this menu in the following cases:
• Several device data with the same frequency of synchronous signal and different input
timings is registered.
• You want to set the input timing again.
Digital
The value that is automatically detected by the MSD will be set.
Use this menu to restore the input timing to the original value.
9.7.8 Registering device data
Menu
Top→INPUT TIMING→SAVE
Setting for
Each input channel, each input signal (only analog input signal)
Setting value No. 1 to No.99
You can save up to 99 analog RBG/analog YPbPr input timing settings.
The device data can be named up to 14 characters using ASCII code 20 to 7D. The device table name is
optional. If a device table name is not registered and press MENU/SET key without device table name, the
input resolution is registered as the device table name automatically. If a device table name is already
registered and press MENU/SET key without device table name, the input timing is saved to the device table
name without changing the device table name.
From the next time, when the same signal is input to other channel, video will be displayed with the registered
timing.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
If there is no input signal on the input channel it shows "NOT AVAILABLE NOW" on the front VFD screen.
9.7.9 Tracking
Menu
Top→INPUT TIMING→TRACKING
Setting for
Each input channel, each input signal (only analog input signal)
Setting value 0 to 63 [Default]: 0
You can adjust the tracking of analog RGB/analog YPbPr input video.
If there is no input signal on the input channel it shows "NOT AVAILABLE NOW" on the front VFD screen.
68
[Table 9.7] Items to be loaded
Item
Advertisement
Table of Contents
