System Maintenance; Warning - Delta Modulon DPH Series User Manual

Item
Reset Module
Reset System

7.11 System Maintenance

7.11.1 Warning

Route 1:
MAINTENANCE
Route 2: When there is a warning, the buzzer icon (
will make an alarm sound. Please click the warning icon (
screen.
In the WARNING screen shown below, you can use the buttons (
check the warning logs or use the function key (
the warning logs. The system can store at maximum 200 warning logs.
The WARNING screen also displays relevant solutions. For warning solutions, you can also
refer to 10. Troubleshooting.
UPS-1.1
WARNING
3
2
1
Reset the power modules or not.
In bypass mode, when you press the ON/ OFF button (
start up the UPS but the UPS does not respond, please select
'Reset' to reset the power modules. After the power modules are
reset, please press the ON/ OFF button (
Reset the system or not.
In bypass mode, when you press the ON/ OFF button (
start up the UPS but the UPS does not respond, please select
'Reset' to reset the system. After the system is reset, please
press the ON/ OFF button (
Warning
MEASUREMENT SETUP MAINTENANCE
Log
Touch Panel Comm Loss
PFC#1 Fan Fault
PM#1 Repair Switch Open
Description
) to start up the UPS.
) will illuminate red and the buzzer
1
LOG IN WARNING
Warning Administrator
Solution
Please contact service personnel for more information.
Please contact service personnel for more information.
Please contact service personnel for more information.
7-35
7 LCD Display & Settings
) to start up the UPS.
2
) to go to the WARNING
WARNING
10:15
9
May 25,2018
On-Line
1
) to
) to
) to