Delta Modulon DPH Series User Manual page 158

System Status
5
Click
range, the UPS will run in bypass mode to let the bypass AC source supply power to
the output.
MODE SETTING
6
Switch OFF the Input/ Bypass Breaker (Q1) and Output Breaker (Q3). After that, the
UPS will run in standby mode.
7
8
About 3 minutes later, the UPS will shut down and the LCD and the tri-color LED
9
Switch OFF every external battery cabinet's breaker.
Modulon DPH Series
UPS-1.1 MEASUREMENT SETUP
Power Flow
POWER FLOW
Maintenance
Power Flow
Bypass
Bypass
Summary
Mains
90 %
5 mins
(Figure 6-65 : Bypass Mode Screen_ Administrator Login)
UPS-1.1 MEASUREMENT SETUP
Mode Setting
Select to change system mode
On-Line Green
(Figure 6-66: Select Online Mode)
Administrator Login
MAINTENANCE LOG IN EVENT LOG
Administrator
. If the bypass voltage is in the normal
MAINTENANCE LOG IN EVENT LOG
Administrator
Energy
ECO
Recycle
6-44
10:15
May 25,2018
Bypass
Load
30 %
10:15
May 25,2018
Bypass
Frequency
Conversion