Battery & Charging Setting - Delta Modulon DPH Series User Manual

Item
Slew Rate
Power Module
Redundancy
Asynchronous
Transfer Time
Module
Sequential Start
System
Sequential Start
7.10.4 Battery & Charging Setting
Route:
SETUP
In the BATTERY & CHARGING SETTING screen shown below, you can set up the
following items. The settings must be carried out by qualified service personnel. Please
contact Delta customer service for assistance.
UPS-1.1
BATTERY & CHARGING SETTING
Battery Low Warning
Float Charge Voltage
Set up the maximum permissible speed for the system output
frequency to catch up the bypass frequency variation.
Set up how many power modules that need to be preserved for
redundancy.
When it is impossible for the inverter to reach synchronous phase
lock with the bypass, the output will be terminated during conversion
process according to this setup time.
Set up the time interval for every power module to be converted
from the battery mode to online mode. The setup is applicable to the
generator to avoid bearing the whole loads right away.
Set up the time interval for the system to be converted from
the battery mode to online mode. The setup is applicable to the
generator to avoid bearing the whole loads right away.
Battery & Charging Setting
MEASUREMENT SETUP
Battery & Charging Setting
PAGE
1
Battery Type Battery Rating Voltage
168
PbAc
Battery Cut Off Voltage
154 140
V
Equalized Charge Voltage
190 196
V
Description
MAINTENANCE LOG IN EVENT LOG
Administrator
PAGE PAGE PAGE
2 3 4
Battery Strings
V
1
Capacity
36
V AH
Charge Current (Max)
8
V A
7-25
7 LCD Display & Settings
10:15
May 25,2018
Bypass
Submit