System Maintenance; Alarm Warning - Delta Ultron HPH Series User Manual

Item
Reset Module
Reset System

7.11 System Maintenance

7.11.1 Alarm Warning

Path 1:
MAINTENANCE
Path 2: When there is a warning, the buzzer icon (
will make an alarm sound. Click the warning icon (
After entering the WARNING screen (shown in the figure below), you may use the
(
to enter
200 warning logs.
The WARNING screen also displays relevant solutions. For warning solutions, please refer
to 10. Troubleshooting.
UPS-1.1
WARNING
3
2
1
Reset the power modules or not.
In bypass mode, when you press the ON/ OFF button (
start up the UPS but the UPS does not respond, please select
'Reset' to reset the power modules. After the power modules are
reset, please press the ON/ OFF button (
Reset the system or not.
In bypass mode, when you press the ON/ OFF button (
start up the UPS but the UPS does not respond, please select
'Reset' to reset the system. After the system is reset, please
press the ON/ OFF button (
) buttons to inquire about warning logs or use the function key (
MEASUREMENT SETUP MAINTENANCE
Log
Touch Panel Comm Loss
PFC#1 Fan Fault
PM#1 Repair Switch Open
Description
) to start up the UPS.
) will light up in red, and the buzzer
) to enter the WARNING screen.
2
WARNING
LOG IN WARNING
Warning Administrator
Solution
Please contact service personnel for more information.
Please contact service personnel for more information.
Please contact service personnel for more information.
7-35
7 LCD Display & Settings
) to start up the UPS.
09:30
9
May 10,2018
On-Line
1
) to
) to
)
1