Delta Modulon DPH Series User Manual page 206

There are several optional accessories available for this DPH series UPS. Please refer to the table
below for the optional accessories and their descriptions.
No.
1 Dust Filter
2 Relay I/O Card
EnviroProbe 1000/
3 EnviroProbe 1100/
EnviroProbe 1200
Battery Cabinet
4 Temperature Sensor
Cable
Parallel Cable
5
(5-meter long)
Parallel Cable
6
(10-meter long)
Battery Management
7
System
Battery Module
8
(with batteries)
Battery Module
9
(without batteries)
NOTE:
1. For detailed installation and operation of any accessory mentioned above, please refer
to the Quick Guide, User Guide, or Installation & Operation Guide included in the
package of the relevant optional accessory.
2. If you want to buy any accessory mentioned above, please contact your local dealer or
customer service.
Modulon DPH Series
Item
Prevents dust from entering into the UPS to ensure UPS
reliability and to prolong product life.
Increases the quantity of dry contacts.
Monitors temperature, humidity and other connected
monitoring devices in a room environment. The EnvioProbe
1000/ 1100/ 1200 should work with either an SNMP card or an
EMS2000.
Detects the temperature of an external battery cabinet
connected to the UPS.
Connects the parallel UPSs.
Connects the parallel UPSs.
Monitors (1) each battery's voltage, (2) each battery pack's
voltage and charging/ discharging current, and (3) battery
environment temperature.
Supplies battery power to the critical loads connected to the
UPS when a power failure occurs. For more information,
please refer to 5.9 Battery Module (Optional).
Provides the space for batteries to be installed. For how many
batteries and what types of batteries that should be installed
inside the empty battery module, please contact Delta service
personnel for more information.
Function
8-2