Mode Setting - Delta Modulon DPH Series User Manual

Bypass Frequency Range
Bypass Voltage (Max.)
Bypass Voltage (Min.)
ECO Voltage Range

7.10.2 Mode Setting

Route:
SETUP
In the MODE SETTING screen shown below, you can set up the UPS's operation mode.
There are five selections, which are on-line, green, ECO, energy recycle and frequency
conversion modes. Only qualified service personnel can perform the above-mentioned
setup items. Please contact Delta customer service for assistance.
UPS-1.1
MODE SETTING
Item
On-line Mode
Green Mode
Item
Set up the bypass output's frequency range.
Set up the bypass output's maximum voltage.
Set up the bypass output's minimum voltage.
Set up the bypass output's voltage range in ECO mode.
Mode Setting
MEASUREMENT SETUP
Mode Setting
Select to change system mode
On-Line Green
Set up the UPS in on-line mode. In on-line mode, it is the inverter to
supply power to the connected loads.
Set up the UPS in green mode. In green mode, it is the inverter to
supply power to the connected loads and the power modules take
turn to rest according to the situation of total load capacity.
Description
MAINTENANCE LOG IN EVENT LOG
Administrator
Energy
ECO
Recycle
Description
7-23
7 LCD Display & Settings
10:15
May 25,2018
Bypass
Frequency
Conversion