Item
INPUT
CONTACT
Not only does the EMS screen show status of the input contacts (please refer to
), but the Warning screen, Historical Event screen, UPS tri-color LED indicator and
buzzer also response to the status of the input contacts.
Event Type
of Input
Contact
None
Information
Warning
Alarm
7.11 System Maintenance
7.11.1 Alarm Warning
Path 1:
MAINTENANCE
Path 2: When there is a warning, the buzzer icon (
will make an alarm sound. Tap the warning icon (
After entering the WARNING screen (shown in the figure below), you can use the
(
a specific page No. to check the warning logs. The system can store up to 200 warning
logs.
Sub Item
Input Contact 1
1. Set each input contact as Normally Open (NO)/
Input Contact 2
2. Set the title for each input contact.
Input Contact 3
3. Set the event type as None/ Information/ Warning/
Input Contact 4
EMS
Tri-color
DI1 ~ DI4
Indicator
(LCD)
Green
Green
Yellow
Red
) icons to view the warning logs or use the function key (
Description
Normally Closed (NC).
Alarm.
LED
Buzzer
Green
No Sound
Green
No Sound
Yellow
Short Beep
Red
Long Beep
2
) to enter the WARNING screen.
WARNING
7-47
7
LCD Display & Settings
Warning
(LCD)
No
No
Yes
Yes
) will light up in red, and the buzzer
Historical
Event
(LCD)
No
Yes
Yes
Yes
) to enter
1