System Maintenance; Alarm Warning - Delta Modulon DPH series User Manual

Item
Reset Module
Reset System

7.11 System Maintenance

7.11.1 Alarm Warning

Path 1:
MAINTENANCE
Path 2: When there is a warning, the buzzer icon (
make an alarm sound. click the warning icon (
After entering the WARNING screen (shown in figure below), you may use the
to enter a specific page No. to check the warning logs. The system can store at maximum
200 warning logs.
The WARNING screen also displays relevant solutions. For warning solutions, please refer
to 10. Troubleshooting.
UPS-1.1
WARNING
3
2
1
Reset the power modules or not.
In bypass mode, when you press the ON/ OFF button (
start up the UPS but the UPS does not respond, please select
'Reset' to reset the power modules. After the power modules are
reset, please press the ON/ OFF button (
Reset the system or not.
In bypass mode, when you press the ON/ OFF button (
start up the UPS but the UPS does not respond, please select
'Reset' to reset the system. After the system is reset, please press
the ON/ OFF button (
MEASUREMENT SETUP MAINTENANCE
Log
Touch Panel Comm Loss
PFC#1 Fan Fault
PM#1 Repair Switch Open
Description
) to start up the UPS.
) will light up in red, and the buzzer will
2
) to enter the WARNING screen.
WARNING
LOG IN WARNING
Warning Administrator
Solution
Please contact service personnel for more information.
Please contact service personnel for more information.
Please contact service personnel for more information.
7-35
7 LCD Display & Settings
) to start up the UPS.
10:15
9
May 25,2018
On-Line
1
) to
) to
)
1