Battery & Charging Setting - Delta DPS Series User Manual

Item
Asynchronous
Transfer Time
Module
Sequential Start
System
Sequential Start
7.6.4 Battery & Charging Setting
Path: → Battery & Charging Setting
Item
Battery Type
Battery Rating Voltage
Battery Strings
Battery Low Warning
Ultron DPS Series
When (1) the inverter is not synchronized with the bypass
and (2) the loads need to be transferred to the bypass
source, there will be an interrupted transfer time according to
this setup value.
Set up the time interval for every power module to be
transferred from Battery mode to On-Line mode. The setup
will help the generator to handle the whole loads in a
sequential manner to avoid generator shutdown due to
sudden inrush current.
Set up the time interval for the system to be transferred from
Battery mode to On-Line mode. The setup will help the
generator to handle the whole loads in a sequential manner
to avoid generator shutdown due to sudden inrush current.
Set up the battery type as VRLA/ LiB (Dry Contact)
*2
(Integration) .
NOTE:
1
1. * If you use non-Delta lithium-ion batteries,
please set up the battery type as 'LiB (Dry
Contact)'. Please refer to 4.1.6 Input Dry
Contacts and 7.6.6 Dry Contact Setting. For
more information about configurations of the
lithium-ion batteries, please contact Delta
customer service.
2
2. * If you use the Delta lithium-ion batteries, please
set up the battery type as 'LiB (Integration)'. The
item 'LiB (Integration)' will appear on the LCD
only if you use the Delta lithium-ion batteries with
the optional multifunctional communication card
(MFC) being installed in the SMART slot. Please
contact Delta customer service if you need more
information.
Set up the battery voltage rating.
Set up how many battery strings that are used on site.
Set up the battery low warning voltage.
114
Description
Description
*1
/ LiB