Battery/ Battery Pack Replacement - Delta RT Series User Manual

Battery/ Battery Pack Replacement

6.2
NOTE:
1. Turn off the UPS and cut off the AC source before performing battery/ battery pack
replacement.
2. A battery can present a risk of electric shock and high short-circuit current.
3. Servicing of batteries and battery packs must be performed or supervised by qualified
service personnel knowledgeable in batteries, battery packs and the required
precautions. Keep unauthorized personnel away from batteries and battery packs.
Replace the battery/ battery pack by following the procedures below.
1. Unscrew the screws and remove the front bezel .
2. Disconnect the battery terminals .
3. Use a Phillips screwdriver to remove the screws from the protection cover located in front of
the batteries. Then, remove the protection cover .
4. Pull out the battery from the left battery compartment and insert a new one. Follow the
same procedure to replace the battery in the right battery compartment .
5. Reassemble the battery pack in reverse order.

Amplon RT Series

28
