Bms; Bypass Setting; Mode Setting; Output Setting - Delta Modulon DPH Series User Manual

UPS-1.1 MEASUREMENT
Power Flow
POWER FLOW
Maintenance
Power Flow
Bypass
Bypass
Summary
Mains
System Status
90 %
5 mins
EMS
Main Menu Icon
Tap the icon to go to the Measurement Menu. In the menu, you can
check the UPS's readings including the following:
1. Main Input
2. Bypass Input
3. Inverter Output
4. Power Module Summary
MEASUREMENT
5. UPS Output
6. Battery Status
7. EMS

8. BMS

For more information, please refer to 7.9 Check System Readings.
Tap the icon to go to the Setup Menu. In the menu, you can set up
the following:

1. Bypass Setting

2. Mode Setting

3. Output Setting

4. Battery & Charging Setting

5. Parallel Setting

6. Dry Contact Setting

SETUP
7. General Setting
8. IP Setting

9. Control

10. EMS Setting
11. BMS Setting
For more information, please refer to 7.10 UPS Settings.
SETUP MAINTENANCE LOG IN
Administrator
Description
7-17
7 LCD Display & Settings
10:15
May 25,2018
EVENT LOG
On-Line
Load
30 %