ELECTRICAL
VEHICLE SPEED SENSOR
SPEED SENSOR LOCATION
q
The speed sensor
is located on the right side of the
transmission case and can be accessed from behind the
right rear wheel.
11.12
SPEED SENSOR TESTING
Special Tools Required:
Static Timing Light Harness (PN 2871745)
Hall Sensor Probe Harness (PN 2460761)
1. Disconnect the 3 wire harness from the speed
sensor
and
remove
transmission.
2. Connect the wires from the Static Timing Light
Harness to the sensor 3 pin connector using the Hall
Sensor Probe Harness (PN 2460761).
3. Pass a screwdriver back and forth in front of the
sensor tip.
4. Be sure connections are good and 9V battery is in
good condition. If the light flashes, the sensor is
good.
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
the
sensor
from
the
© Copyright TAYLOR-DUNN