Main Frame/Engine Ground - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

5. Measure gap with a
specifications in picture below for proper spark plug
type and gap. Adjust gap if necessary by bending the
side electrode carefully.
Spark Plug Gap:
0.030-0.037 in. (0.84 +/– 0.08 mm)
6. If necessary, replace spark plug with proper type.
CAUTION
Severe engine damage may occur if the incorrect spark
plug is used.
7. Install spark plugs and torque to specification.
Recommended Spark Plug:
Autolite 5924
TORQUE
Spark Plug:
9 ft-lbs (12 Nm)
Do Not Apply Anti-seize
8. Install spark plug wire into spark plug / engine.
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
wire gauge. Refer to

MAIN FRAME/ENGINE GROUND

Inspect engine ground cable connections
ground wires are tight and not corroded. The main
chassis ground can be found below the fuse box under
the driver's seat base.
MAINTENANCE
q
. Be sure
2
2.35