CVT SYSTEM
6. With the tool now properly installed, in sequence
torque the eight engine to transmission coupler bolts
to specification.
TORQUE
Engine To Trans Coupler Bolts:
In Sequence:55 ft-lb (75 Nm)
7. Torque the two rear transmission isolator fasteners
to specification.
8. Remove the Clutch Center Distance tool and
reassemble the CVT system as outlined in this
chapter.
TORQUE
Rear Trans. Isolator Bolts:
40 ft-lbs (54 Nm)
5.12
e
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN