Taylor-Dunn G0-010-00 Service And Replacement Parts Manual page 47

7. Remove the drain plug and allow lubricant to drain
completely.
NOTICE
On some 2012 vehicles, a commercially available long
ball end hex bit socket may be needed to remove the
drain plug.
8. Clean the drain plug magnetic surface. Reinstall
drain plug with a new O-ring and torque to
specification.
9. Add the recommended amount of lubricant through
the fill plug hole. Maintain the lubricant level at the
bottom of the fill plug hole when filling the
transmission. Do not overfill.
REF.
DESCRIP-
TION
w Fill Plug
e Drain Plug
FLUID CAPACITY
Recommended Transmission Lubricant:
Full Synthetic AGL (PN 2878068) (Quart)
Capacity: 41 oz. (1200 ml)
10. Reinstall fill plug with a new O-ring and torque to
specification.
TORQUE
Transmission Drain / Fill Plug:
14 ft-lbs (19 Nm)
11. Check for leaks. Dispose of used lubricant properly.
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
NOTES
14 ft-lbs (19
Nm)
14 ft-lbs (19
Nm)
MAINTENANCE
2
2.23