Taylor-Dunn G0-010-00 Service And Replacement Parts Manual page 30

MAINTENANCE
ITEM
▶ Wiring
D Clutches
D Front wheel bearings
D Brake fluid
Spark arrestor
D
Valve clearance
E
Idle speed
D Toe adjustment
Auxiliary brake (if
D▶
equipped)
Headlight aim
▶ = Perform these procedures more often for vehicles subjected to severe use.
E= Emission Control System Service (California)
D = Have an authorized TAYLOR-DUNN dealer perform these services.
2.6
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
HOUR- CALEN-
MILES (KM)
S DAR
-
100 H 12 M
1000 (1600)
100 H 12 M
-
100 H 12 M
-
200 H 24 M
- -
60 M
- 5000 (8000)
500 H
-
-
-
-
REMARKS
Inspect for wear, routing, security; apply
dielectric grease to connectors subjected to
water, mud, etc.
Inspect; clean; replace worn parts
Inspect; replace as needed
Change every two years
Clean out
Inspect; adjust
Adjust as needed.
Inspect periodically; adjust when parts are
replaced
Inspect daily; adjust as needed
Adjust as needed
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN